Smaller than lifting oblong links, these links provide room for snaps, carabiners, and other non-lifting connectors.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

The twisted shape of these links prevents loads from rotating or knotting.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

Often used with transport chain, these links are good for binding, tying down, and pulling loads.

Use these links for general lifting applications.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Once secured with the included locking pin, these links must be cut off to be removed.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.