Roller chain links engage with matched sprocket teeth to transmit power between rotating shafts.

This 304 stainless steel roller chain is more corrosion resistant than treated steel roller chain.

Made of 316 stainless steel, this is our most corrosion-resistant chain.

A rubber ring seals grease between the bushings and pins and keeps out dust and other contaminants.

Plastic bushings as well as stainless steel pins and outer side plates give this chain a longer service life than other lightweight chain.

This self-lubricating nickel-plated steel chain has better corrosion resistance than steel chain and does not require regular maintenance.

Made of stainless steel, this chain has excellent corrosion resistance.

This steel chain handles higher loads than stainless steel chain.

Also known as side bow chain, this chain has extra clearance between components for flexing from side to side on systems with curved tracks and sprockets that aren’t exactly aligned.

Made of treated steel, these links offer increased corrosion resistance over steel attachment links.

Drive out chain pins with a twist of the handle.

Hook into your roller chain and use the handle to tighten the jaw until the chain ends are close enough to add or remove a link. Choose from holders with maximum jaw capacity from 1 3/4” to 5”.

Also known as captured guides, deep-channel guides prevent chain from slipping off track.

Place these steel inserts between two roller links. If they can be inserted past your ANSI number, the chain is worn out.