Chain Style Chain Style |
|---|
 |
| Straight Link |
Material Material |
|---|
|
Finish Finish |
|---|
|
Length Length |
|---|
|
|
|
Trade Size Trade Size | Show |
|---|
|
Trade Size Trade Size | Hide |
|---|
Application Application |
|---|
|
Capacity Capacity |
|---|
|
Sling Type Sling Type |
|---|
 | Chain |
Maximum Temperature Maximum Temperature |
|---|
|
About Sling Configurations and Capacity
More
Corrosion-Resistant Chain—Not for Lifting
This chain withstands conditions that can deteriorate steel chain.
304 and 316 stainless steel chain are the most corrosion resistant. 316 stainless steel is more corrosion resistant than 304 stainless steel, so you can use it in food processing areas and environments where chemicals are used.
Cut-Resistant Square-Link Chain—Not for Lifting
For maximum security, square links are more difficult to cut with bolt cutters than round links. Chain is case-hardened for cut and wear resistance. Use it to securely tie down items and lock up tools.
General Purpose Grade 80 Chain—For Lifting
Strong and durable, use this chain for your lifting applications. It is heat treated and stamped with the grade and manufacturer. When using fittings with chain, you must match the trade size and meet or exceed the chain’s grade.
Zinc-plated steel chain has good corrosion resistance.
Warning: Never use to lift people or items over people.
Inside | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade Size | Metric Trade Size | Thick. | Wd. | Lg. | Cap., lbs. | Wt. per ft., lbs. | Approximate No. of Links per ft. | For Fitting Thick. | Max. Temp., °F | For Use Outdoors | Lengths, ft. | Per Ft. | |
Black Painted Steel | |||||||||||||
| 9/32 | 7 | 0.28" | 0.41" | 0.88" | 3,500 | 0.8 | 13 | 3/8" | 400° | No | 0000000 | 00000 | |
Zinc-Plated Steel | |||||||||||||
| 9/32 | 7 | 0.28" | 0.41" | 0.82" | 3,500 | 0.8 | 13 | 3/8" | 400° | No | 0000000 | 0000 | |
Gauge measures the maximum allowable wear tolerances on links of Grade 80 and Grade 100 steel chain, as required by OSHA. If the gauge can be inserted over any part of the link, the chain should be taken out of service.
High-Strength Grade 100 Chain—For Lifting
This chain is approximately 25% stronger than Grade 80 chain. It's heat treated and stamped with the grade and manufacturer. When using fittings with chain, you must match the trade size and meet or exceed the chain’s grade.
Zinc-plated steel chain has good corrosion resistance.
Warning: Never use to lift people or items over people.
Inside | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade Size | Metric Trade Size | Thick. | Wd. | Lg. | Cap., lbs. | Wt. per ft., lbs. | Approximate No. of Links per ft. | For Fitting Thick. | Max. Temp., °F | For Use Outdoors | Lengths, ft. | Per Ft. | |
Unfinished Steel | |||||||||||||
| 9/32 | 7 | 0.28" | 0.38" | 0.83" | 4,300 | 0.8 | 14 | 3/8" | 400° | No | 0000000 | 00000 | |
Black Zinc-Plated Steel | |||||||||||||
| 9/32 | 7 | 0.28" | 0.38" | 0.83" | 4,300 | 0.8 | 14 | 3/8" | 400° | No | 0000000 | 0000 | |
Gauge measures the maximum allowable wear tolerances on links of Grade 80 and Grade 100 steel chain, as required by OSHA. If the gauge can be inserted over any part of the link, the chain should be taken out of service.
| For Chain Trade Size | For Manufacturer Model Number | Each | |
For Grade 80 and Grade 100 Chain | |||
|---|---|---|---|
| 9/32, 3/8, 1/2, 5/8, 3/4, 7/8, 1 | C8, C10 | 0000000 | 000000 |
| 9/32, 3/8, 1/2, 5/8, 3/4, 7/8, 1 | L8, L10 | 00000000 | 00000 |
| 9/32, 3/8, 1/2, 5/8, 3/4, 7/8, 1 | P8, P10, H29, KWB | 00000000 | 00000 |
For Grade 100 Chain | |||
| 9/32, 3/8, 1/2, 5/8, 3/4, 7/8, 1 | PW, PWA | 00000000 | 00000 |
Extra-High-Strength Grade 120 Chain—For Lifting
The strongest chain grade we offer, it’s approximately 20% stronger than Grade 100 chain and 50% stronger than Grade 80 chain. It is heat treated and stamped with the grade and manufacturer. The links are square, which helps spread wear evenly at the contact points. When using fittings with chain, you must match the trade size and meet or exceed the chain’s grade.
Warning: Never use to lift people or items over people.
High-Temperature Grade 63 Chain—For Lifting
With a maximum temperature of 500° F, this chain withstands higher temperatures than other steel chain. It is heat treated and stamped with the grade and manufacturer. When using fittings with chain, you must match the trade size and meet or exceed the chain’s grade.
Warning: Never use to lift people or items over people.
Corrosion-Resistant Chain—For Lifting
Use this stainless steel chain when lifting in food processing areas and environments where chemicals are used. It resists rust and salt water. When using fittings with chain, you must match the trade size and meet or exceed the chain’s grade.
Warning: Never use to lift people or items over people.
Chain Slings with Latching Hooks
Latching hooks allow you to quickly release a load. The chain provides strength and ruggedness to withstand harsh working conditions. Slings include a tag that shows chain grade and size, length, and capacities in each configuration.
Stainless steel slings are corrosion resistant.
Grade 100 steel slings are approximately 20% stronger than grade 80 steel.
Note: Do not use slings at an angle less than 30°.
Warning: Never use to lift people or items over people.
Capacity, lbs. | Hook | Eye | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade Size | at 30° | at 45° | at 60° | Vertical Capacity, lbs. | Opening Wd. | Usable Lg. | Wd. | Lg. | Wd. | Thick. | Specifications Met | Other Lengths, ft. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | 8 ft. Lg. | 10 ft. Lg. | |
Grade 80 Steel Chain | ||||||||||||||||||
1 Leg | ||||||||||||||||||
| 9/32 | __ | __ | __ | 3,500 | 1 1/8" | 2 1/4" | 5/8" | 5" | 2 1/2" | 9/16" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 0000000 | |||||
2 Leg | ||||||||||||||||||
| 9/32 | 3,500 | 4,900 | 6,100 | __ | 1 1/8" | 2 1/4" | 5/8" | 5" | 2 1/2" | 9/16" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 0000000 | |||||
3 Leg | ||||||||||||||||||
| 9/32 | 5,200 | 7,400 | 9,100 | __ | 1 1/8" | 3 3/4" | 3/4" | 5 1/2" | 2 3/4" | 3/4" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 0000000 | |||||
4 Leg | ||||||||||||||||||
| 9/32 | 5,200 | 7,400 | 9,100 | __ | 7/8" | 2 1/4" | 3/4" | 5 1/2" | 2 3/4" | 3/4" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 0000000 | |||||
Grade 100 Steel Chain | ||||||||||||||||||
2 Leg | ||||||||||||||||||
| 9/32 | 4,300 | 6,100 | 7,400 | __ | 1 1/8" | 2 3/4" | 3/4" | 4 3/8" | 2 3/8" | 5/8" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 000000000 | |||||
3 Leg | ||||||||||||||||||
| 9/32 | 6,400 | 9,100 | 11,200 | __ | 1 1/8" | 2 3/4" | 3/4" | 6 5/16" | 3 9/16" | 15/16" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 0000000 | |||||
4 Leg | ||||||||||||||||||
| 9/32 | 6,400 | 9,100 | 11,200 | __ | 1 1/8" | 2 3/4" | 3/4" | 6 5/16" | 3 9/16" | 15/16" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 0000000 | |||||
Grade 63 316 Stainless Steel Chain | ||||||||||||||||||
2 Leg | ||||||||||||||||||
| 9/32 | 2,700 | 3,800 | 4,600 | __ | 1 1/8" | 3" | 3/4" | 4 3/8" | 2 3/8" | 11/16" | __ | __ | 000000000 | |||||
3 Leg | ||||||||||||||||||
| 9/32 | 4,000 | 5,700 | 7,000 | __ | 1 1/4" | 3" | 3/4" | 4 3/8" | 2 3/8" | 11/16" | __ | 2 to 20 | 00000000 | |||||
4 Leg | ||||||||||||||||||
| 9/32 | 4,000 | 5,700 | 7,000 | __ | 1 1/4" | 3" | 3/4" | 4 3/8" | 2 3/8" | 11/16" | __ | 2 to 20 | 00000000 | |||||
| For Chain Trade Size | Each | |
| 9/32 | 00000000 | 00000 |
Adjustable Chain Slings
 Style B Shown in Two Leg Configuration |  | | |||||
| 60° Angle |  Style B | Vertical | ||||
Adjust the chain length and number of legs without changing slings. The chain provides strength and ruggedness to withstand the harshest working conditions.
Style B slings have capacities in each configuration stamped on the top link. For vertical configurations, use only one leg and the top eye while the other hangs free.
Note: Do not use slings at an angle less than 45°.
Warning: Never use to lift people or items over people.
Chain Slings with Grab Hooks
Grab hooks can securely hold onto a single link of chain to shorten a leg or create loops. The chain provides strength and ruggedness to withstand the harshest working conditions. Slings include a tag that shows chain grade and size, length, and capacities in each configuration.
Grade 100 steel slings are approximately 20% stronger than grade 80 steel.
Capacity, lbs. | Hook | Eye | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade Size | at 30° | at 45° | at 60° | Vertical Capacity, lbs. | Opening Wd. | Usable Lg. | Wd. | Lg. | Wd. | Thick. | Specifications Met | Other Lengths, ft. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | 8 ft. Lg. | 10 ft. Lg. | |
Grade 80 Steel Chain | ||||||||||||||||||
1 Leg | ||||||||||||||||||
| 9/32 | __ | __ | __ | 3,500 | 1/4" | 1 1/4" | 1 1/8" | 5" | 2 1/2" | 9/16" | ASME B30.9, OSHA 1910.184 | 2 to 20 | 0000000 | |||||
2 Leg | ||||||||||||||||||
| 9/32 | 3,500 | 4,900 | 6,100 | __ | 1/4" | 1 1/4" | 1 1/8" | 5" | 2 1/2" | 9/16" | ASME B30.9, OSHA 1910.184 | __ | 0000000 | |||||
3 Leg | ||||||||||||||||||
| 9/32 | 5,200 | 7,400 | 9,100 | __ | 1/4" | 1 1/4" | 1 1/8" | 5 1/2" | 2 3/4" | 3/4" | ASME B30.9, OSHA 1910.184 | 2 to 20 | 0000000 | |||||
4 Leg | ||||||||||||||||||
| 9/32 | 5,200 | 7,400 | 9,100 | __ | 1/4" | 1 1/4" | 1 1/8" | 5 1/2" | 2 3/4" | 3/4" | ASME B30.9, OSHA 1910.184 | 2 to 20 | 0000000 | |||||
Grade 100 Steel Chain | ||||||||||||||||||
2 Leg | ||||||||||||||||||
| 9/32 | 4,300 | 6,100 | 7,400 | __ | 3/8" | 1 5/8" | 1" | 4 3/8" | 2 3/8" | 5/8" | ASME B30.9, OSHA 1910.184 | 2 to 20 | 000000000 | |||||
3 Leg | ||||||||||||||||||
| 9/32 | 6,400 | 9,100 | 11,200 | __ | 3/8" | 1 5/8" | 1" | 6 5/16" | 3 9/16" | 15/16" | ASME B30.9, OSHA 1910.184 | 2 to 20 | 0000000 | |||||
4 Leg | ||||||||||||||||||
| 9/32 | 6,400 | 9,100 | 11,200 | __ | 3/8" | 1 5/8" | 1" | 6 5/16" | 3 9/16" | 15/16" | ASME B30.9, OSHA 1910.184 | 2 to 20 | 0000000 | |||||
Chain Slings with Locking Hooks
Prevent accidental opening of the hook with these locking hooks. The chain provides strength and ruggedness to withstand harsh working conditions. Slings include a tag that shows chain grade and size, length, and capacities in each configuration.
Grade 100 steel slings are approximately 20% stronger than grade 80 steel.
Note: Do not use slings at an angle less than 30°.
Warning: Never use to lift people or items over people.
Capacity, lbs. | Hook | Eye | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade Size | at 30° | at 45° | at 60° | Vertical Capacity, lbs. | Opening Wd. | Usable Lg. | Wd. | Lg. | Wd. | Thick. | Specifications Met | Other Lengths, ft. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | 8 ft. Lg. | 10 ft. Lg. | |
Grade 80 Steel Chain | ||||||||||||||||||
1 Leg | ||||||||||||||||||
| 9/32 | __ | __ | __ | 3,500 | 1 5/8" | 2 1/2" | 7/8" | 5" | 2 1/2" | 9/16" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 0000000 | |||||
2 Leg | ||||||||||||||||||
| 9/32 | 3,500 | 4,900 | 6,100 | __ | 1 5/8" | 2 1/2" | 7/8" | 5" | 2 1/2" | 9/16" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 0000000 | |||||
3 Leg | ||||||||||||||||||
| 9/32 | 5,200 | 7,400 | 9,100 | __ | 1 5/8" | 2 1/2" | 7/8" | 5 1/2" | 2 3/4" | 3/4" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 0000000 | |||||
4 Leg | ||||||||||||||||||
| 9/32 | 5,200 | 7,400 | 9,100 | __ | 1 5/8" | 2 1/2" | 7/8" | 5 1/2" | 2 3/4" | 3/4" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 0000000 | |||||
Grade 100 Steel Chain | ||||||||||||||||||
2 Leg | ||||||||||||||||||
| 9/32 | 4,300 | 6,100 | 7,400 | __ | 1 1/4" | 2 1/2" | 3/4" | 4 3/8" | 2 3/8" | 5/8" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 000000000 | |||||
3 Leg | ||||||||||||||||||
| 9/32 | 6,400 | 9,100 | 11,200 | __ | 1 1/4" | 2 1/2" | 3/4" | 6 5/16" | 3 9/16" | 15/16" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 0000000 | |||||
4 Leg | ||||||||||||||||||
| 9/32 | 6,400 | 9,100 | 11,200 | __ | 1 1/4" | 2 1/2" | 3/4" | 6 5/16" | 3 9/16" | 15/16" | OSHA 1910.184, ASME B30.9 | 2 to 20 | 0000000 | |||||