Specially designed with spiral flutes that reduce chip buildup on the cutting edge, these countersinks produce a clean, smooth finish on your material.

Pop these countersinks into power drills, screwdrivers, and other tools that accept 1/4" hex shanks. Tools grip their hex shanks more securely than round shanks to tackle jobs that require higher torque.

Often used to cut hard and abrasive materials, these carbide countersinks are harder, stronger, and more wear resistant than cobalt steel and high-speed steel countersinks.

More heat and abrasion resistant than high-speed steel for better performance on hard-to-machine materials.

To create a clean, smooth finish on your material, these countersinks have specially designed spiral flutes that reduce chip buildup on the cutting edge.

Made with a large number of flutes and cutting edges to lightly shear off material, these tools repair and clean out holes for machining between centers.

The built-in pilot maintains alignment in the hole.

When one end dulls, turn the countersink around to use the other end. An angled hole passes through the center of the countersink to reduce vibration and chatter, which creates smooth cuts and prevents chips from clogging the tool.

Carbide is harder, stronger, and more wear resistant than high-speed steel for better performance on hard and abrasive materials.

Harder, stronger, and more wear resistant than high-speed steel countersinks, these are carbide for better performance on hard and abrasive materials.

These carbide countersinks are harder, stronger, and more wear resistant than high-speed steel for better performance on hard and abrasive materials.

The 60° countersink angle is compatible with the profile of centers on a lathe.

An 82° countersink angle is compatible with the profile of flat- and oval-head inch screws; a 90° countersink angle is compatible with the profile of flat- and oval-head metric screws and is also good for deburring.

The 100° countersink angle is compatible with the profile of rivets.

For excellent performance on hard and abrasive materials, these carbide countersinks are harder, stronger, and more wear resistant than cobalt steel and high-speed steel countersinks.

Carbide is harder, stronger, and more wear resistant than cobalt steel and high-speed steel for better performance on hard and abrasive materials.

For applications where the workpiece will go through several machining processes, these countersinks bevel the outer edges of the hole and provide an additional 120° chamfer to prevent damage to the center hole.

Carbide is harder, stronger, and more wear resistant than high-speed steel for excellent performance on hard and abrasive materials.

For use on wood and plastic.

For better performance on hard and abrasive materials, the carbide countersinks in these sets are harder, stronger, and more wear resistant than high-speed steel countersinks.

For a clean, smooth finish on your material, these countersinks have specially designed spiral flutes that reduce chip buildup on the cutting edge.

For general purpose use.

To create a smooth, clean finish on your material, these countersinks have specially designed spiral flutes that reduce chip buildup on the cutting edge.

Carbide is harder, stronger, and more wear resistant than high-speed steel for better performance on hard and abrasive materials.

The built-in pilot maintains alignment in the hole.

The 100° countersink angle is compatible with the profile of rivets.

With more heat and abrasion resistance than high-speed steel, cobalt steel is often used on hard-to-machine materials.

Choose for general purpose applications.

Use with plastic and wood.

Use these end mills for general purpose work in most material, such as aluminum, brass, bronze, iron, and steel. Their angled profile allows chamfer, bevel, and other angled cuts.

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. The teeth are angled on both sides so you can make top and bottom chamfer cuts without having to flip the workpiece.

These carbide-tipped end mills provide a sharper, harder cutting edge and better wear resistance than high-speed steel without the brittleness of solid carbide. Their teeth are angled on both sides so you can make top and bottom chamfer cuts without having to flip the workpiece.

These bits have a straight cutting edge for flush trimming and an angled cutting edge for making 22° chamfer cuts. They're for use on countertops and other plastic laminate material.

Heat resistant and shaped for turning stainless steel specifically, these inserts will last longer than inserts for multiple materials.

Choose these premium turning carbide inserts to cut a variety of materials without changing out your tool.

Cut aluminum, copper, brass, and other non-ferrous materials with these premium inserts.

Resisting wear and fractures when cutting hardened steel, these cubic boron nitride inserts last longer than carbide inserts.

These tools come with carbide inserts installed. When one edge of the insert dulls, rotate it to use a sharp edge.