Powered by liquid, use these to pump a second liquid or to produce emulsions, elevate water, and transport grains and other small particles.

Automatically control output from a distance using 4-20 mA or external-pulse signals. These pumps meter a consistent amount of liquid within ±2% of the maximum flow.

A 316 stainless steel housing provides corrosion resistance for a long life in harsh environments. These pumps meter a consistent amount of liquid within ±2% of the maximum flow.

An adjustment dial with a locking lever allows for easy flow control. Also known as diaphragm metering pumps, these can be used with pressures up to four times higher than standard pumps for chemicals.

For high-volume chemical sampling and draining, these pumps have a powerful motor that enables them to move 2,448 gallons of liquid per day.

Install these pumps in a panel cutout. Often used in food and beverage, pharmaceutical, and lab applications, they dispense small amounts of liquid at a set rate.

With a footprint that's only a few inches in any direction, these pumps fit into compact systems to dispense small amounts of acids, cleaning fluids, and other chemicals. They're often used in sterilization, photochemical, and water treatment systems.

Use these pumps for high-pressure output of antifreeze, hydraulic oil, and motor oil.

These pumps have a bronze housing and brass or bronze gears for use with water. Also known as gear pumps, they produce a smooth flow of liquid for water delivery.

Designed to fit into small equipment, these pumps have miniature gears and a subfractional horsepower motor for low-flow applications.

A cast iron housing and steel gears allow these pumps to be used with hydraulic and motor lubricating oil. Also known as gear pumps, they produce a smooth flow of liquid for applications such as engine lubrication.

Commonly called rotary vane pumps, they have a built-in bypass relief valve to prevent pressure buildup.

A high-horsepower motor moves oil with a viscosity similar to SAE 60 motor oil. Also known as gear pumps, these produce a smooth flow of liquid to lubricate equipment and blend oils.

Commonly called rotary vane pumps, these are designed to pump water at high pressures in low-flow applications. Use at pressures up to 240 psi.

Use these pumps to move lubricating oil such as hydraulic and motor oil. Also known as flexible impeller pumps, they create a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump.