Fill these air-and liquid-tight bottles directly from your line to store, test, and ship liquids. Connect to a quick-clamp fitting with the included gasket and clamp.

Squeeze the bottle to force liquid through the tube and into the cup, then pour out the measured amount.

These carboys are fluorinated to prevent contents from being absorbed.

The open top makes these easier to fill than jugs, while the spout gives more control when pouring.

Often used in cafeterias and food-processing areas, these pans meet NSF/ANSI 2 standards for food equipment.

Made of plastic to resist harsh acids and corrosives, these safety cans have a self-closing cap to prevent spills and a trigger handle to empty contents with one hand.

Mix and store noncorrosive flammable liquids, such as paints and lacquers.

A self-closing faucet provides controlled, one-handed dispensing of liquids.

Resistant to chemicals such as ammonia, detergents, and cleaning fluids, these pumps have a Santoprene diaphragm and polypropylene housing. Pumps can be used to move thick sludges and slurries

These pumps have a chemical-resistant polypropylene housing for use in harsh environments.

These pumps have a PTFE diaphragm compatible with oil, fuel, and chemicals such as mineral spirits, methyl ethyl ketone (MEK), and xylene. They have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments.

With a 316 stainless steel housing and a PTFE diaphragm, these pumps resist a variety of acids, alkalies, and flammable liquids such as phosphoric acid, acetone, and methyl ethyl ketone (MEK). They're designed for moving large volumes of thick sludges and slurries in demanding environments.

Replace worn or broken parts on your transfer pump.

Also known as sprayer pumps, these provide a smooth, uniform flow for agricultural spraying, soap dispensing, and chemical transferring.

With a 316 stainless steel housing and a fluoroelastomer diaphragm, these pumps resist a variety of harsh acids and alkalies, such as phosphoric acid, nitric acid, and sulfuric acid. They have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered transfer pumps.

Made of FDA listed materials for use with food and beverage, these pumps have a sanitary quick-clamp fluid connection for easy cleaning. They are commonly used to move sauces, concentrates, and other thick liquids with solids.

Commonly called piston pumps, these are often used in high-pressure applications, such as hydrostatic testing of pipelines, tanks, and valves.

A cast iron housing and steel gears allow these pumps to be used with hydraulic and motor lubricating oil. Also known as gear pumps, they produce a smooth flow of liquid for applications such as engine lubrication.

Rated for continuous use, these pumps are often used to move caustics such as antifreeze and salt water. Mount them in any position, even upside down. Also known as diaphragm pumps, they are typically used for low-flow spraying, draining, and washdown applications.

An aluminum enclosure around the motor provides protection in dusty and dirty environments. Designed to fit into small equipment, these pumps have miniature gears and a subfractional horsepower motor for low-flow applications.

With a higher pressure than other air-powered drum pumps, these pumps move thick chemicals with a viscosity of up to 5,000 centipoise. A stainless steel housing stands up to acids, solvents, and other caustics.

Also known as peristaltic pumps and tubing pumps, these maintain a fixed flow rate.

With a footprint that's only a few inches in any direction, these pumps fit into compact systems to dispense small amounts of acids, cleaning fluids, and other chemicals. They're often used in sterilization, photochemical, and water treatment systems.

These sprayers have a more durable construction than our other plastic hand-pump sprayers.

These sprayers are small enough to use with one hand.

A rechargeable battery keeps these sprayers pressurized, so you don’t have to stop to pump while spraying herbicides, insecticides, disinfectants, cleaners, and other solutions.

Fill air-atomizing sprayers with these pitchers. The nozzle is designed to fit into the sprayer opening and has a removable brass filter to strain out foreign particles.

These bottles are fluorinated to prevent contents from being absorbed.

Often used in laboratories, these dispensers fit on most lab bottles. Push down on the top to dispense precise amounts of acids, solvents, and other liquids.

Squeeze the ball to create pressure, then push down on the dispenser to dispense flammable liquids into vials, test tubes, and other small containers. Only a PTFE tube and stainless steel pump come into contact with the liquid.

An additive prevents electrostatic discharge from building up on the surface of these dispensers.

The jug inside these cardboard containers collapses as it dispenses for uninterrupted flow.

Also known as closed-head pails, these rectangular jugs have a small top opening. Use them to safely ship hazardous liquids.