Collet Type Collet Type |
|---|
 | 100-TG |
System of Measurement System of Measurement |
|---|
|
Face Type Face Type |
|---|
 | Round |
For Holding For Holding |
|---|
|
Maximum Body Diameter Maximum Body Diameter |
|---|
|
Overall Length Overall Length |
|---|
|
For Use With For Use With |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Approximate Diameter Compression Approximate DiameterCompression |
|---|
|
Material Material |
|---|
|
100-TG Collets
Install into a 100-TG collet chuck or holder to tightly grip round-shank tool bits in milling machines.
For technical drawings and 3-D models, click on a part number.
| Size | Workpiece Dia. Tolerance | Max. Body Dia. | Approximate Dia. Compression | Overall Lg. | Material | Each | |
Round | |||||||
|---|---|---|---|---|---|---|---|
| 1/8" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 000000 |
| 3/16" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 1/4" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 5/16" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 3/8" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 7/16" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 1/2" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 9/16" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 5/8" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 3/4" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 7/8" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 1" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |