Height Height |
|---|
|
|
|
Depth Depth |
|---|
|
|
|
Width Width |
|---|
|
|
|
Cover Material Cover Material |
|---|
|
Inside Height Inside Height |
|---|
|
|
|
Inside Width Inside Width |
|---|
|
|
|
Inside Depth Inside Depth |
|---|
|
|
|
Cover Clarity Cover Clarity |
|---|
|
Closure Screw Material Closure Screw Material |
|---|
|
Circuit Board Enclosures
These enclosures have internal slots to hold circuit boards in place. Use them in areas where liquids are not a concern. The included end caps are secured with screws. Remove the end caps and the front panel can slide off on enclosures 4 3/4" high and taller to provide access to components.
For technical drawings and 3-D models, click on a part number.
| Ht. | Wd. | Dp. | Environment | No. of Slots | Each | |
Aluminum | ||||||
|---|---|---|---|---|---|---|
| 2 3/8" | 1 3/4" | 1" | Indoor | 4 | 0000000 | 000000 |
| 3 1/8" | 1 3/4" | 1" | Indoor | 4 | 0000000 | 00000 |
| 3 1/8" | 2 1/8" | 7/8" | Indoor | 4 | 0000000 | 00000 |
| 4 3/4" | 3 1/8" | 1" | Indoor | 4 | 0000000 | 00000 |
| 4 3/4" | 4" | 1 1/4" | Indoor | 5 | 0000000 | 00000 |
| 4 3/4" | 4" | 2 1/8" | Indoor | 11 | 0000000 | 00000 |
| 6 1/4" | 3 1/8" | 1" | Indoor | 4 | 0000000 | 00000 |
| 6 1/4" | 4" | 1 1/4" | Indoor | 5 | 0000000 | 00000 |
| 6 1/4" | 4" | 2 1/8" | Indoor | 11 | 0000000 | 00000 |
| 6 1/4" | 5" | 2" | Indoor | 11 | 0000000 | 00000 |
| 6 1/4" | 6 1/2" | 1 1/4" | Indoor | 5 | 0000000 | 00000 |
| 6 1/4" | 6 1/2" | 2" | Indoor | 11 | 0000000 | 00000 |
| 8 3/4" | 4" | 2 1/8" | Indoor | 11 | 0000000 | 00000 |
| 8 3/4" | 5" | 1 1/4" | Indoor | 5 | 0000000 | 00000 |
| 8 3/4" | 6 1/2" | 1 1/4" | Indoor | 5 | 0000000 | 00000 |
| 8 3/4" | 6 1/2" | 2" | Indoor | 11 | 0000000 | 00000 |
Build-Your-Own Circuit Board Enclosure Bodies
Choose a body and two matching end caps to make your own dust-tight or watertight enclosure. The bodies have internal slots to hold circuit boards in place and can be cut to height. Bodies without a flange require drilling and tapping new holes on one end when cut.
Dust-tight end caps provide IP40 protection from dust.
Watertight end caps provide IP65 protection from water projected from a nozzle.
For technical drawings and 3-D models, click on a part number.
Bodies | Dust-Tight End Caps | Watertight End Caps | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Flange Wd. | Environment | No. of Slots | Each | Each | Each | |||
Aluminum with Side Flange | |||||||||||
| 6" | 4" | 2 3/4" | 1/2" | Indoor | 7 | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
| 12" | 4" | 2 3/4" | 1/2" | Indoor | 7 | 0000000 | 00000 | 0000000 | 0000 | 000000 | 00 |
| 39 1/2" | 4" | 2 3/4" | 1/2" | Indoor | 7 | 0000000 | 00000 | 0000000 | 0000 | 000000 | 00 |
Aluminum | |||||||||||
| 6" | 6 1/2" | 4" | __ | Indoor | 7 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 12" | 6 1/2" | 4" | __ | Indoor | 7 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 12" | 7 3/4" | 6 1/2" | __ | Indoor | 7 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| 18" | 6 1/2" | 4" | __ | Indoor | 7 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| 18" | 7 3/4" | 6 1/2" | __ | Indoor | 7 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
Electronics Enclosures
Small and lightweight, these enclosures are used with sensors, switches, and testing devices. Use them indoors where liquids are not a concern. They are ABS plastic for impact resistance.
For technical drawings and 3-D models, click on a part number.
Mounting | ||||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Environment | No. of Holes | Hole Dia. | Color | Each | |
With Lift-Off Cover and Screw Closure | ||||||||
| 2 1/8" | 1 3/8" | 9/16" | Indoor | __ | __ | Black | 0000000 | 00000 |
| 2 1/4" | 1 5/8" | 3/4" | Indoor | __ | __ | Black | 0000000 | 0000 |
| 2 3/8" | 1 7/8" | 15/16" | Indoor | __ | __ | Black | 0000000 | 0000 |
| 3 1/4" | 2 5/16" | 13/16" | Indoor | __ | __ | Black | 0000000 | 0000 |
| 3 5/8" | 2 1/4" | 1" | Indoor | 4 | 1/4" | Black | 0000000 | 0000 |
| 3 5/8" | 2 1/4" | 1 1/2" | Indoor | 4 | 1/4" | Black | 0000000 | 0000 |
| 4 1/2" | 3 1/4" | 1 1/2" | Indoor | 4 | 1/4" | Black | 0000000 | 0000 |
| 4 1/2" | 3 1/4" | 2 1/2" | Indoor | 4 | 1/4" | Black | 0000000 | 0000 |
| 5 3/4" | 3 1/4" | 1 1/2" | Indoor | 4 | 1/4" | Black | 0000000 | 0000 |
| 5 3/4" | 3 1/4" | 2 1/2" | Indoor | 4 | 1/4" | Black | 0000000 | 00000 |
| 7" | 5" | 1 1/2" | Indoor | 6 | 1/4" | Black | 0000000 | 00000 |
| 7" | 5" | 2 1/2" | Indoor | 6 | 1/4" | Black | 0000000 | 00000 |
| 9 1/2" | 6 1/4" | 1 1/2" | Indoor | 6 | 1/4" | Black | 0000000 | 00000 |
| 9 1/2" | 6 1/4" | 2 1/2" | Indoor | 6 | 1/4" | Black | 0000000 | 00000 |
See-Through Electronics Enclosures
These enclosures allow you to inspect your electronics without opening the cover. They are small and lightweight for use with sensors, switches, and testing devices. Use them indoors where liquids are not a concern. These enclosures are ABS plastic for impact resistance.
For technical drawings and 3-D models, click on a part number.
Machine-Mount Corrosion-Resistant Washdown
Enclosures with See-Through Cover
Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards. They have a clear cover, so you can inspect components without opening the enclosure. Rated NEMA 4X and 13 as well as IP65, these enclosures protect electronics from dirt, washdowns, corrosion, oil/coolant spraying, and water projected from a nozzle. They are polycarbonate, which resists denting, chipping, and cracking.
Panels are for mounting components inside enclosures.
For technical drawings and 3-D models, click on a part number.
Enclosures | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Panels | ||||||||||
| Ht. | Wd. | Dp. | Environment | Component Mount Type | No. of Holes | Hole Dia. | Color | Each | Each | ||
With Lift-Off Cover and Screw Closure | |||||||||||
| 2" | 2" | 1 3/8" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 00000000 | 00000 | 000000000 | 00000 |
| 2 1/2" | 2 1/4" | 1 3/8" | Corrosive, Oily, Washdown | __ | 2 | 0.181" | Gray | 0000000 | 0000 | 000000000 | 0000 |
| 3 1/4" | 3 1/8" | 2 1/8" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 00000000 | 00000 | 000000000 | 0000 |
| 4 1/2" | 2 1/2" | 1 5/8" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 0000 |
| 4 1/2" | 2 1/2" | 2 1/8" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 0000 |
| 4 1/2" | 3 1/2" | 2 1/8" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 0000 |
| 4 1/2" | 3 1/2" | 3 1/8" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 0000 |
| 4 3/4" | 4 3/4" | 2 3/8" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 00000000 | 00000 | 000000000 | 0000 |
| 4 3/4" | 4 3/4" | 3 1/2" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 00000000 | 00000 | 000000000 | 0000 |
| 6 1/4" | 3 1/8" | 2 1/8" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 00000000 | 00000 | 000000000 | 0000 |
| 6 1/4" | 3 1/8" | 3 3/8" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 00000000 | 00000 | 000000000 | 0000 |
| 6 3/4" | 4 3/4" | 2 1/8" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 0000 |
| 6 3/4" | 4 3/4" | 3 1/8" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 0000 |
| 8 3/4" | 5 3/4" | 2 1/8" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 00000 |
| 8 3/4" | 5 3/4" | 3" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 00000 |
Machine-Mount Electronics
Corrosion-Resistant Washdown Enclosures
Mounting feet make attachment to machines and walls hassle-free. Small and lightweight, these enclosures are used with sensors, switches, testing devices, and circuit boards. They are rated NEMA 4X and 13 as well as IP65 for protection from dirt, washdowns, corrosion, oil/coolant spraying, and water projected from a nozzle. Made of polycarbonate, these enclosures resist denting, chipping, and cracking.
Panels are for mounting components inside enclosures.
For technical drawings and 3-D models, click on a part number.
Enclosures | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Panels | ||||||||||
| Ht. | Wd. | Dp. | Environment | Component Mount Type | No. of Holes | Hole Dia. | Color | Each | Each | ||
With Lift-Off Cover and Screw Closure | |||||||||||
| 2" | 2" | 1 3/8" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 00000000 | 00000 | 000000000 | 00000 |
| 2 1/2" | 2 1/4" | 1 3/8" | Corrosive, Oily, Washdown | __ | 2 | 0.181" | Gray | 0000000 | 0000 | 000000000 | 0000 |
| 3 1/4" | 3 1/8" | 2 1/8" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 00000000 | 00000 | 000000000 | 0000 |
| 4 1/2" | 2 1/2" | 1 5/8" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 0000 |
| 4 1/2" | 2 1/2" | 2 1/8" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 0000 |
| 4 1/2" | 3 1/2" | 2 1/8" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 0000 |
| 4 1/2" | 3 1/2" | 3 1/8" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 0000 |
| 4 3/4" | 4 3/4" | 2 3/8" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 00000000 | 00000 | 000000000 | 0000 |
| 4 3/4" | 4 3/4" | 3 1/2" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 00000000 | 00000 | 000000000 | 0000 |
| 6 1/4" | 3 1/8" | 2 1/8" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 00000000 | 00000 | 000000000 | 0000 |
| 6 1/4" | 3 1/8" | 3 3/8" | Corrosive, Oily, Washdown | __ | 4 | 0.181" | Gray | 00000000 | 00000 | 000000000 | 0000 |
| 6 3/4" | 4 3/4" | 2 1/8" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 0000 |
| 6 3/4" | 4 3/4" | 3 1/8" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 0000 |
| 8 3/4" | 5 3/4" | 2 1/8" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 00000 |
| 8 3/4" | 5 3/4" | 3" | Corrosive, Oily, Washdown | Circuit Board Slots | 4 | 0.181" | Gray | 0000000 | 00000 | 000000000 | 00000 |