Rated to MIL-DTL-26482 specifications, these connectors are compatible with other products that meet the same standard. They lock in place with a quarter turn to remain secure in high-vibration environments. All come assembled with pins and sleeves in place; poles are numbered. When mating, the gender and housing lock location must be opposite.

For technical drawings and 3-D models, click on a part number.

Connectors secure with a quarter turn when mated, yet unlock and pull apart with minimal force. All have the same pin and socket configurations as MIL-DTL-26482, so they are compatible with other products that meet the same standard. They’re rated IP67 to protect against dust and temporary submersion. When mating connectors, the gender and housing lock location must be opposite. Poles are labeled with letters on the face of the connectors to ensure proper connection.

Crimpers (sold separately) are required for wire installation.

For technical drawings and 3-D models, click on a part number.

With a PVC housing, connectors withstand exposure to chemicals, oil, fuel, and salt water. Each set includes one plug and one socket. They’re often used in construction vehicles and machine tool applications. All come assembled with wire leads already installed so they can be quickly added to existing wiring systems. When mated, connectors meet IP67 for protection against dust and temporary submersion.

For technical drawings and 3-D models, click on a part number.

With thick threads similar to a light bulb, these connectors take only a few turns to lock into place for a secure connection in washdown and high-vibration areas. Detach them just as quickly for frequent maintenance. They’re IP rated when mated, which means they seal out dust as well as water from hoses and even brief submersion. Though they’re small to save space, they carry higher currents than other mini connectors to power cameras, machine tools, HVAC equipment, and I/O modules. Their housing stands up to UV rays, so you can install them outdoors.

Attach these connectors to mating quick-connect cords.

Connectors with screw terminals can be quickly installed on cable with a screwdriver. They’re also known as field installable connectors.

Connectors with wire leads are known as TC-ER, which means they meet crush and impact requirements for exposed cable in cable carriers.

Add caps to connectors that aren’t in use to keep out dust and debris.

For technical drawings and 3-D models, click on a part number.