Clamp Pipe Fittings | McMaster-Carr

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

Claw-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

An alternative to bolt-together fittings, these handle larger tube OD sizes and have higher vacuum ratings than quick-clamp fittings. Also known as ISO-K high-vacuum fittings, the clamps have claws that grab hold of fittings with flanged ends.

Butt-Weld Fittings for Stainless Steel Tubing

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Clamps for Claw-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

Connect claw-clamp high-vacuum fittings for an airtight seal.

High-Polish Gasket Fittings for Stainless Steel Tubing

Fittings are polished to a32 Ra and under finish on the interior.

Ultra-High-Polish Gasket Adapters
for Stainless Steel Tubing

Ultra-High-Polish Gasket Fittings
for Stainless Steel Tubing

Polished to a 15 Ra and under finish, these fittings have a mirror smooth interior. They are also known as ultra-high-purity fittings.

Nuts for Ultra-High-Polish Gasket
Fittings for Stainless Steel Tubing

Bolt-Together High-Vacuum
Fittings for Stainless Steel Tubing

For high-vacuum systems with tube sizes too large for quick-clamp (KF) fittings, choose these bolt-together fittings.

Rings for Claw-Clamp and Bolt-Together
High-Vacuum Fittings for Stainless Steel Tubing

Create airtight seals in high-vacuum systems by placing these rings between two claw-clamp (ISO-K) or bolt-together (ISO-F) fittings.

Through-Wall Fittings for High-Vacuum Chambers

Also known as feedthroughs, these fittings transfer liquids, cryogenic liquids, or gasses into high-vacuum chambers for coating, cooling, and leak-testing applications without losing vacuum pressure.

Clamp-On Fittings for Steel Tubing

Clamps for Vacuum Fittings for Steel Tubing

Vacuum Fittings for Steel Tubing

Use these fittings in an air vacuum system to avoid the hassle of brazing and welding. Insert two fittings into a clamp and tighten to form a secure seal in steel tubing.

Repair Clamps for Steel Tubing

Repair pinholes, punctures, and cracks in low-pressure systems with these clamps. Insert tubing into the clamp and tighten the bolts to create a secure seal.

Sanitary Sampling Stainless Steel Tube Fittings

Take samples in sanitary environments—these tube fittings won’t contaminate your lines or force you to pause them.

Clamp-On Connectors

Low-Pressure Clamp-On Connectors
for Drain, Waste, and Vent

Cut-to-Length Low-Pressure Clamp-On
Connectors for Drain, Waste, and Vent

Connect two pipes that are up to 100 feet apart—cut the connector to the length you need and attach a clamp to each end.

Low-Pressure Clamp-On Connectors for Air

These connectors are for use in low-pressure air and vacuum conveying systems, as well as in gravity-flow systems.

Low-Pressure Quick-Lock Clamp-On Connectors for Air

A turn of the T-handle will tighten and loosen these connectors, so you can quickly disassemble and reassemble your lines without tools.

Low-Pressure Clamp-On Connectors for Water

Also known as no-hub couplings, these have a one-piece sleeve with a stop in the center, so you know your pipe is always aligned correctly.

Medium-Pressure Clamp-On Connectors

Use in medium-pressure applications up to 230 psi.

High-Pressure Clamp-On Connectors

Use in high-pressure applications up to 500 psi.

Iron and Steel Pipe and Pipe Fittings

Grooved-End Iron Pipe Fittings

The grooved ends on these iron fittings connect to pipe with a clamp to easily install piping systems.

Standard-Wall Grooved-End
Steel Pipe Nipples and Pipe

This steel pipe has grooved ends that connect to fittings with a clamp (sold separately) for an easy way to install piping systems.

High-Pressure Iron and Steel Threaded Pipe Fittings

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

Low-Pressure Iron and Steel Threaded Pipe Fittings

Use these fittings for low-pressure applications in noncorrosive environments.

High-Pressure Socket-Connect
Steel Unthreaded Pipe Fittings

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slide the pipe into the socket and weld.

Thick-Wall Butt-Weld Steel Unthreaded Pipe Fittings

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Pipe Repair Clamps

Low-Pressure Pipe Repair Clamps for Air

Also known as patch clamps.

Low-Pressure Pipe Repair Clamps for Water

Low-Pressure Pipe Repair Clamps for Steam

Also known as patch clamps.

Low-Pressure Pipe Repair Clamps for Drinking Water

Low-Pressure Pipe Repair Clamps for Natural Gas

Medium-Pressure Pipe Repair Clamps

Use in medium-pressure applications up to 600 psi.

High-Pressure Pipe Repair Clamps

Use in high-pressure applications up to 1,000 psi.

Plastic Pipe and Pipe Fittings

Clamps for Easy-Access CPVC
Pipe Fittings for Chemicals

Use these clamps to connect easy-access CPVC pipe fittings and pipe.

Easy-Access CPVC Pipe for Chemicals

Also known as Victaulic pipe, this pipe has grooved ends that connect to fittings and flanges with a clamp, so you can access your line for routine maintenance. It is CPVC, which has excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

Easy-Access CPVC Pipe Fittings for Chemicals

Also known as Victaulic fittings, these have grooved ends that connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. Fittings have excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

Clamps for Easy-Access UV-Resistant
Polypropylene Pipe Fittings for Chemicals

Use these clamps to connect easy-access UV-resistant polypropylene pipe fittings to pipe. The clamp-together design allows you to access your line for routine maintenance.

Easy-Access UV-Resistant Polypropylene
Pipe Fittings for Chemicals

Also known as manifold flange fittings, these have a clamp-together design that lets you access your line for routine maintenance. Fittings resist acids, solvents, and other harsh chemicals. They won’t deteriorate when exposed to the damaging effects of ultraviolet light, so they’re suitable for outdoor use.

Drain, Waste, and Vent ABS Pipe Fittings for Chemicals

These fittings are an economical option for chemical waste systems. Fittings are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

Thick-Wall Plastic Pipe Fittings for Water

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Standard-Wall Plastic Pipe Fittings for Water

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Aboveground Standard-Wall PVC Pipe
Fittings for Drain, Waste, and Vent

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

Clamp-On Expansion Joints

Slip these joints over your pipe ends and tighten the band clamps for a secure hold.

Clamp-On Expansion Joints for Drain, Waste, and Vent

These joints are designed for vertical use in drain, waste, and vent systems.

Plastic Routing Clamps

Snap-In Plastic Routing Clamps

Quickly mount parallel lines of pipe, hose, or tubing by clicking them into these clamps. Made of acetal, they are UV-resistant and can be used outdoors.

Chemical-Resistant Plastic Routing Clamps

For use on a single line, these polypropylene clamps withstand moisture and most chemicals. They're commonly used to route tubing in compressed air systems. A folding arm closes to secure material.

Two-Line Chemical-Resistant Plastic Routing Clamps

Route two lines of tubing with a single clamp. Commonly used in compressed air systems, these polypropylene clamps withstand moisture and most chemicals. They have a folding arm that closes to secure material.

Plastic Expansion Routing Clamps

Flexible grooves inside these polypropylene clamps allow material to expand and contract. Clamps are moisture and chemical resistant.

Connectable Plastic Routing Clamps

Join these clamps together to line up multiple pipes, cables, or tubes side-by-side, even when they are different sizes.

Multiline Plastic Routing Clamps

Organize multiple lines of pipe, tubing, or hose with a single clamp. They are polyethylene for good chemical and UV resistance.

Plastic Routing Clamps

For use with a single line, these plastic clamps reduce wear on softer materials, such as tubing and cable, and prevent corrosion caused by metal-to-metal contact.

Lock-Close Strut-Mount Plastic Routing Clamps

Slide these clamps into strut channel and snap closed for quick installation with no tools required. They are noncorrosive, nonconductive nylon.

Adhesive-Back Plastic Routing Clamps

Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.

Routing Clamps

Narrow-Space Strut-Mount Metal Routing Clamps

Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.

Strut-Mount Metal Routing Clamps

Route pipe, tubing, and conduit across strut channel.

Low-Profile Strut-Mount Metal Routing Clamps

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Strut-Mount Metal Routing Clamps for Insulated Pipe

Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.

Standoff Strut-Mount Metal Routing Clamps

Hold pipe, tubing, and conduit away from strut channel.

Routing Clamps

For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.

Two-Line Routing Clamps

Mount parallel lines of pipe, tubing, or conduit directly against the mounting surface.

Vibration-Damping Routing Clamps

Rails for Rail-Mount Vibration-Damping Routing Clamps

Bolt or weld these rails to the mounting surface, then attach clamps with a rail nut.

Rail-Mount Vibration-Damping Routing Clamps

For use with a single line, these clamps mount directly onto rails, no adhesive or welding required. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Two-Line Rail-Mount
Vibration-Damping Routing Clamps

Secure two pressurized hydraulic lines with a single clamp. Mount these clamps directly onto rails, no adhesive or welding required. They fit tightly around the lines to reduce vibration.

Weld-Mount Vibration-Damping Routing Clamps

For a more secure connection than rail- and adhesive-mount clamps, weld the bottom plate of these clamps onto your rails. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Two-Line Weld-Mount
Vibration-Damping Routing Clamps

Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps.

Strut-Mount Vibration-Damping Routing Clamps

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Adhesive-Mount Vibration-Damping Routing Clamps

Avoid the hassle of welding with these adhesive-mount clamps—they use a high-strength adhesive to form a permanent bond with the mounting surface—no additional tools required. Once assembled, the clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Vibration-Damping Routing Clamps

A rubber cushion reduces vibration and wear from clamp edges. The cushion also protects lines of pipe, tubing, and conduit from corrosion caused by metal-to-metal contact.

Magnetic Vibration-Damping Routing Clamps

Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.

Loop Clamps

Vibration-Damping Loop Clamps

A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.

Multiline Vibration-Damping Loop Clamps

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

Snug-Fit Vibration-Damping Loop Clamps

A molded cushion reduces vibration and wear from clamp edges, plus it provides a tighter fit around material than standard vibration-damping loop clamps.

Loop Clamps

These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.

Multiline Loop Clamps

Plastic Loop Clamps

Compared to metal loop clamps, plastic loop clamps reduce wear on soft materials, such as tubing and cable. Clamps are nonconductive and noncorrosive.

Riser Clamps

Support vertical pipes passing through floors.

Riser Clamps for Insulated Pipe

Use these clamps to route insulated pipe through floors. They have a plastic insert that creates a seal around the pipe's insulation to prevent the pipe from sweating, which can cause mold and corrosion.

Standoff Clamps

Adjustable Standoff Clamps

Tighten the bolt for an exact fit around material. Clamps secure vertical pipes in sanitation drain applications and prevent them from coming in contact with the mounting surface.

Standoff Clamps

Keep material from coming in contact with the mounting surface without the need for a spacer.

Threaded-Rod-Mount Hangers

Plastic Clamping Hangers

These plastic hangers prevent corrosion caused by metal-to-metal contact. Push them closed for a more secure hold on material than loop hangers.

Adjustable Plastic Clamping Hangers

These hangers fit a range of material sizes. Push them closed to lock at the size you need. They provide a more secure hold on material than loop hangers.

Quick-Install Plastic Clamping Hangers

Clip these hangers onto the side of threaded rod. Unlike other threaded-rod-mount hangers, you can use more than one hanger on the same rod to organize multiple lines of pipe, tubing, and conduit.

Snug-Hold Threaded-Rod-Mount Clamping Hangers

Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers.

Threaded-Rod-Mount Clamping Hangers

Also known as conduit hangers, these hangers load from the bottom so you can add or remove material without removing the mounted hanger.

Stackable Threaded-Rod-Mount Clamping Hangers

Mount these hangers on top of one another to organize multiple lines of pipe, tubing, and conduit at any angle.

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean.

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Stackable Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Connect these hangers to organize multiple lines of pipe, tubing, and conduit. The tight-fitting, santoprene body reduces vibration and prevents corrosion caused by metal-to-metal contact.

Swivel Threaded-Rod-Mount Loop Hangers

These hangers have a swivel nut for adjusting direction after mounting. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Side-Load Threaded-Rod-Mount Loop Hangers

Access material quickly without uninstalling the mounted hanger. These hangers have a removable bolt for loading pipe, tube, and conduit from the side. Combine them with a threaded rod or other fastener to hang from the ceiling.

Threaded-Rod-Mount Roller Loop Hangers

A roller on the bottom of these hangers compensates for movement due to expansion and contraction, such as in hydraulic applications. Combine with a threaded rod or other fastener to hang from the ceiling.

Stainless Steel Threaded-Rod-Mount Loop Hangers

Use these hangers in corrosive environments and where chemicals are present. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Pivoting Threaded-Rod-Mount Loop Hangers

Also known as clevis hangers, these have a pivoting loop that adjusts for line movement and vibration. Combine with a threaded rod or other fastener to hang from the ceiling.

Threaded-Rod-Mount Multiline Hangers

Route multiple lines of pipe, tubing, and conduit with a single hanger. A wide opening and locking tab allow access for installation, adjustment, and removal.

Weld-Mount Clamping Hangers

For a strong, secure connection, mount these hangers by welding them to a rod.

Suspension Beams for Threaded Rod

Mount these beams across parallel roof joists to hang threaded rod and route pipe, duct, and other overhead systems in areas where there’s no anchoring point.

Strap-Mount Clamping Hangers

Use these close-fitting hangers for a more rigid hold around material than when using straps alone.

Floor Routing Supports

Adjustable-Height Floor-Mount Strut-Style Supports

Adjust supports to the exact height you need to route pipe, conduit, and tubing through strut-mount routing clamps and hangers.

Floor-Mount Clamp-Style Supports

For a secure hold on pipe and conduit suspended above the ground, these supports have a cushioned clamp provides a 360° grip while reducing vibration.

Floor-Mount Flange-Style Supports

Bolt directly to a pipe flange to suspend a run of pipe above the ground.

Floor-Mount Strut-Style Supports

Reduce noise caused by HVAC systems. These sturdy rubber supports isolate vibration caused by heat pumps and air conditioning units, resulting in a quieter facility. When used on roofs, they also keep components above puddled water, which can cause damage.

Floor-Mount Saddle-Style Supports

These U-shaped supports allows access to pipe and conduit after installation.

U-Bolts

Clamping U-Bolts

Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.

Vibration-Damping U-Bolts

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

U-Bolts with Mounting Plates

A mounting plate provides a more secure hold at the mounting surface.

U-Bolts

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.

U-Bolt Mounting Plates

Add a mounting plate to your U-bolt for a more secure hold at the mounting surface.

Nonconductive U-Bolts

These fiberglass-reinforced polyurethane U-bolts have no metal parts, so they won't conduct electricity or cause metal-to-metal corrosion.

Rubber-Cushioned Square U-Bolts

Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.

Square U-Bolts

Suspend and route flat-bottomed objects such as strut channel and small duct.

Rubber-Cushioned U-Bolts

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to dissemble it.

Stud-Mount Routing Supports

Attach these supports onto metal stud knockouts to route cable, conduit, and tubing through metal studs.

Railing Clamps

Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.

Seismic Bracing Anchors and Brackets

These OSHPD approved anchors and brackets support threaded-rod-mount hangers during seismic activity.

Beam Clamps for Pipe, Tube, and Conduit

These clamps have a fixed hanger for rigid connections.

Easy-Position Beam Clamps
for Pipe, Tube, and Conduit

Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.

Strut-Mount Routing Saddles for Insulated Pipe

Clip these saddles around the outside of strut channel for a quick way to route insulated tubing and pipe. Lips on either end of the saddle protect insulation from abrasion if the pipe should move.

Standoff Brackets

Combine with a U-bolt or routing clamp to convey a variety of material, such as pipe, tubing, and cable raceway, at distance from floors, walls, and ceilings. The extra clearance allows access for maintenance and adding and removing lines.

Structural Framing

Aluminum Slip-On Framing and Fittings

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Galvanized Iron and Steel Slip-On Framing and Fittings

To provide corrosion resistance in wet environments, this framing is galvanized.

Carbon Fiber Slip-On Framing and Fittings

Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.

Clamp-On Framing and Fittings

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

Heavy Duty Clamp-On Framing and Fittings

Thick construction makes this framing strong and sturdy.

Strut Channel Brackets for Quick-Connect Clamps

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Strut Channel for Quick-Connect Clamps

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

Flow Sights for High Vacuum

Peer through the glass on these flow sights to see what’s happening in your high-vacuum line.

Strainers

Sanitary Magnetic Strainers

Draw metal shavings and other contaminants out of your sanitary liquid line with these strainers.

Stainless Steel Quick-Clamp T-Strainers

Add these inline T-strainers to your sanitary process line to trap solid particles during clean-in-place (CIP) cycles. They have quick-clamp sanitary tube connections, also known as tri-clamp connections, for use in dairy, food, and other process lines that require frequent cleaning and disassembly. As the high-pressure cleaning fluid flows through your line, the strainer's screen catches particles larger than 1/8" to prevent damage to pumps, valves, and other downstream components.

Screens for Stainless Steel Quick-Clamp T-Strainers

Use these replacement screens with our Stainless Steel Quick-Clamp T-Strainers. Designed for use in dairy, food, and other process lines that use clean-in-place (CIP) systems, they prevent damage to pumps, valves, and other downstream components.

Tube Fittings for Stainless Steel Tubing

High-Polish Metal Quick-Clamp Sanitary Tube Fittings

Clamps for High-Polish MetalQuick-Clamp Sanitary Tube Fittings

Extra-Support High-Polish MetalQuick-Clamp Sanitary Tube Fittings

Extra-High-Polish MetalQuick-Clamp Sanitary Tube Fittings

Plastic Quick-Clamp SanitaryFittings for Stainless Steel Tubing

Quick-Clamp High-VacuumFittings for Stainless Steel Tubing

Claw-Clamp High-VacuumFittings for Stainless Steel Tubing

Butt-Weld Fittings for Stainless Steel Tubing

Clamps for Claw-Clamp High-VacuumFittings for Stainless Steel Tubing

High-Polish Gasket Fittings for Stainless Steel Tubing

Ultra-High-Polish Gasket Adaptersfor Stainless Steel Tubing

Ultra-High-Polish Gasket Fittingsfor Stainless Steel Tubing

Nuts for Ultra-High-Polish GasketFittings for Stainless Steel Tubing

Bolt-Together High-VacuumFittings for Stainless Steel Tubing

Rings for Claw-Clamp and Bolt-TogetherHigh-Vacuum Fittings for Stainless Steel Tubing

Through-Wall Fittings for High-Vacuum Chambers

Clamp-On Fittings for Steel Tubing

Clamps for Vacuum Fittings for Steel Tubing

Vacuum Fittings for Steel Tubing

Repair Clamps for Steel Tubing

Sanitary Sampling Stainless Steel Tube Fittings

Sanitary Sampling Stainless Steel Tube Fittings

Clamp-On Connectors

Low-Pressure Clamp-On Connectorsfor Drain, Waste, and Vent

Cut-to-Length Low-Pressure Clamp-OnConnectors for Drain, Waste, and Vent

Low-Pressure Clamp-On Connectors for Air

Low-Pressure Quick-Lock Clamp-On Connectors for Air

Low-Pressure Clamp-On Connectors for Water

Medium-Pressure Clamp-On Connectors

High-Pressure Clamp-On Connectors

Iron and Steel Pipe and Pipe Fittings

Grooved-End Iron Pipe Fittings

Standard-Wall Grooved-EndSteel Pipe Nipples and Pipe

High-Pressure Iron and Steel Threaded Pipe Fittings

Low-Pressure Iron and Steel Threaded Pipe Fittings

High-Pressure Socket-ConnectSteel Unthreaded Pipe Fittings

Thick-Wall Butt-Weld Steel Unthreaded Pipe Fittings

Pipe Repair Clamps

Low-Pressure Pipe Repair Clamps for Air

Low-Pressure Pipe Repair Clamps for Water

Low-Pressure Pipe Repair Clamps for Steam

Low-Pressure Pipe Repair Clamps for Drinking Water

Low-Pressure Pipe Repair Clamps for Natural Gas

Medium-Pressure Pipe Repair Clamps

High-Pressure Pipe Repair Clamps

Plastic Pipe and Pipe Fittings

Clamps for Easy-Access CPVCPipe Fittings for Chemicals

Easy-Access CPVC Pipe for Chemicals

Easy-Access CPVC Pipe Fittings for Chemicals

Clamps for Easy-Access UV-ResistantPolypropylene Pipe Fittings for Chemicals

Easy-Access UV-Resistant PolypropylenePipe Fittings for Chemicals

Drain, Waste, and Vent ABS Pipe Fittings for Chemicals

Thick-Wall Plastic Pipe Fittings for Water

Standard-Wall Plastic Pipe Fittings for Water

Aboveground Standard-Wall PVC PipeFittings for Drain, Waste, and Vent

Clamp-On Expansion Joints

Clamp-On Expansion Joints

Clamp-On Expansion Joints for Drain, Waste, and Vent

Plastic Routing Clamps

Snap-In Plastic Routing Clamps

Chemical-Resistant Plastic Routing Clamps

Two-Line Chemical-Resistant Plastic Routing Clamps

Plastic Expansion Routing Clamps

Connectable Plastic Routing Clamps

Multiline Plastic Routing Clamps

Plastic Routing Clamps

Lock-Close Strut-Mount Plastic Routing Clamps

Adhesive-Back Plastic Routing Clamps

Routing Clamps

Narrow-Space Strut-Mount Metal Routing Clamps

Strut-Mount Metal Routing Clamps

Low-Profile Strut-Mount Metal Routing Clamps

Strut-Mount Metal Routing Clamps for Insulated Pipe

Standoff Strut-Mount Metal Routing Clamps

Routing Clamps

Two-Line Routing Clamps

Vibration-Damping Routing Clamps

Rails for Rail-Mount Vibration-Damping Routing Clamps

Rail-Mount Vibration-Damping Routing Clamps

Clamps for High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Extra-Support High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Extra-High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Plastic Quick-Clamp Sanitary
Fittings for Stainless Steel Tubing

Quick-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

Claw-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

Clamps for Claw-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

Ultra-High-Polish Gasket Adapters
for Stainless Steel Tubing

Ultra-High-Polish Gasket Fittings
for Stainless Steel Tubing

Nuts for Ultra-High-Polish Gasket
Fittings for Stainless Steel Tubing

Bolt-Together High-Vacuum
Fittings for Stainless Steel Tubing

Rings for Claw-Clamp and Bolt-Together
High-Vacuum Fittings for Stainless Steel Tubing

Low-Pressure Clamp-On Connectors
for Drain, Waste, and Vent

Cut-to-Length Low-Pressure Clamp-On
Connectors for Drain, Waste, and Vent

Standard-Wall Grooved-End
Steel Pipe Nipples and Pipe

High-Pressure Socket-Connect
Steel Unthreaded Pipe Fittings

Clamps for Easy-Access CPVC
Pipe Fittings for Chemicals

Clamps for Easy-Access UV-Resistant
Polypropylene Pipe Fittings for Chemicals

Easy-Access UV-Resistant Polypropylene
Pipe Fittings for Chemicals

Aboveground Standard-Wall PVC Pipe
Fittings for Drain, Waste, and Vent

Two-Line Rail-Mount
Vibration-Damping Routing Clamps

Two-Line Weld-Mount
Vibration-Damping Routing Clamps

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Stackable Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Easy-Position Beam Clamps
for Pipe, Tube, and Conduit