Also known as clamping handles, use these standard adjustable handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

Heavy Duty Adjustable Handles

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Low-Profile Adjustable Handles

Choose these handles when vertical space is limited. Also known as clamping handles, use them for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

Heavy Duty Low-Profile
Adjustable Handles

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments in areas with limited vertical space. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Choose-a-Color Adjustable Handles

Identify equipment controls and components at a glance by their color. Also known as clamping handles, use these handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

Metal-Detectable Adjustable Handles

Use these handles for applications involving frequent positioning, tightening, and holding adjustments near food processing lines without the risk of contaminating the food. These handles are also known as clamping handles.

Safety Adjustable Handles

Prevent unintentional changes to equipment settings—when not in use, these handles are disengaged and turn freely. To change the position, push down on the handle and turn. When you release the handle, it disengages once again. These handles are also known as clamping handles.

Nonmarring Adjustable Handles

The brass tip on the end of the threaded stud prevents damage to surfaces in applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Food Industry Adjustable Handles

Made of stainless steel with a nitrile mounting seal, these handles are suitable for food-processing applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Comfort-Grip Adjustable Handles

A soft textured surface provides a comfortable grip for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Static-Control Adjustable Handles

With a surface resistivity of 10,000 ohms, these handles reduce static electricity that can damage electronic equipment. Also known as clamping handles, use them for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

Cam Handles

Use these standard cam handles for most clamping applications. Push down on the handle and the head applies pressure to quickly draw two parts together for fast adjustments.

Heavy Duty Cam Handles

Also known as double cams, these complete cam handles have a durable, extra-large handle for clamping on fixture bases, plates, and workpieces. For fast adjustments, push down on the handle and the head applies pressure to quickly draw two parts together.

Create-Your-Own Heavy
Duty Cam Handles

Add a pin, rod-end bolt, or other mounting hardware to build a custom assembly. Also known as double cams, these handles have a durable, extra-large handle for clamping on fixture bases, plates, and workpieces. For fast adjustments, push down on the handle and the head applies pressure to quickly draw two parts together.

Knobs

Threaded-Stud Knobs

Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Comfort-Grip Threaded-Stud Knobs

A rubber coating provides a comfortable grip to position, tighten, and hold fixtures, equipment, and machinery. Mount these knobs into a threaded hole.

Choose-a-Color
Threaded-Stud Knobs

Identify equipment controls and components at a glance by their color. Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Palm-Grip Threaded-Stud Knobs

The domed top allows you to firmly hold these knobs in the palm of your hand to position, tighten, and hold fixtures, equipment, and machinery. Mount them into a threaded hole.

Tethered Threaded-Stud Knobs

Never lose these knobs—tether them to equipment to keep them where you need them. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Mount them into a threaded hole.

Easy-Clean Threaded-Stud Knobs

Suitable for food-processing areas, these one-piece knobs have no joints to collect dirt or debris. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Mount them into a threaded hole.

Metal-Detectable
Threaded-Stud Knobs

Made for use in food processing facilities, these plastic knobs have a metal additive that sets off metal detectors if a piece breaks off into your line.

Vibration-Resistant
Threaded-Stud Knobs

Bonded to the stud is an acrylic adhesive that adds friction to resist loosening from vibration. Use these knobs to position, tighten, and hold fixtures, equipment, and machinery. They mount into a threaded hole.

Left-Hand Threaded-Stud Knobs

Knobs have left-hand threads; they're used in applications where counterclockwise motion can loosen common right-hand threads. Mount them into a threaded hole to position, tighten, and hold fixtures, equipment, and machinery.

Threaded-Stud Precise-Control Knobs

Mount these knobs into a threaded hole. Turn the knob to move the stud 0.005" per graduation and make precise adjustments.

Sanitary Threaded-Stud Pull Knobs

Thread these sanitary knobs into holes so you can open doors and drawers in hygienic environments.

Thumb Screws

Large-Diameter
Swivel-Tip Thumb Screws

A wide tip provides more gripping power than standard swivel-tip thumb screws. To use, remove the tip, thread the screw through the hole, and attach the tip on the other side.

Swivel-Tip Thumb Screws

For maximum contact with angled and uneven surfaces, the tip swivels in all directions. The tip is narrow so it will fit through threaded holes.

Ultra-Flexible Swivel-Tip
Thumb Screws

A large swivel angle allows these thumb screws to make better contact with angled and uneven surfaces than nonremovable swivel-tip thumb screws.

Four-Arm Extended-Tip
Thumb Screws

Arms provide a flat surface to push your fingers against.

Metric Four-Arm
Extended-Tip Thumb Screws

These metric thumb screws have arms that provide a flat surface to push your fingers against.

Stainless Steel Knurled-Head
Extended-Tip Thumb Screws

Made from 18-8 stainless steel, these thumb screws are chemical resistant. Also known as dog- and pilot-point thumb screws, insert the point into a drilled hole or slot to hold items in place.

Metric Stainless Steel Knurled-Head
Extended-Tip Thumb Screws

These metric thumb screws are made of chemical-resistant 18-8 stainless steel. Also known as dog- and pilot-point thumb screws, insert the point into a drilled hole or slot to hold items in place.

Steel Knurled-Head
Extended-Tip Thumb Screws

These steel thumb screws have a black-oxide finish to resist corrosion in dry environments.

Large-Grip Plastic-Head
Thumb Screws

A large head allows you to grip these screws with your entire hand for greater torque while tightening than standard knurled plastic-head thumb screws.

Metric Large-Grip
Plastic-Head Thumb Screws

These metric thumb screws have a large head that allows you to grip them with your entire hand for greater torque while tightening than standard knurled plastic-head thumb screws.

Knurled Plastic-Head Thumb Screws

A knurled head allows for slip-resistant controlled adjustment.

Metric Knurled Plastic-Head
Thumb Screws

These metric thumb screws have a knurled head for a slip-resistant controlled adjustment.

Plastic-Head Thumb
Screws with Hex Drive

Tighten these thumb screws by hand or with a hex key for more torque.

Two-Arm Plastic-Head Thumb Screws

Arms provide a flat surface to push your fingers against.

Latching Thumb Screws

The head fits through a slit in a latch or panel to hold it in place.

Stainless Steel Hex-Head
Thumb Screws

Stainless steel thumb screws have excellent corrosion resistance in most environments.

Swivel-Tip Set Screws for Angled Surfaces

Large-Diameter
Swivel-Tip Set Screws

A wide tip provides more gripping power than standard swivel-tip set screws. To use, remove the tip, thread the screw through the hole, and attach the tip on the other side.

Swivel-Tip Set Screws

The tip is narrow to pass through threaded holes.

Alloy Steel Low-Profile
Swivel-Tip Set Screws

These set screws have a low-profile flat-faced ball tip for use in low-clearance applications.

Metric Alloy Steel Low-Profile
Swivel-Tip Set Screws

A low-profile flat-faced ball tip allows these metric set screw to be used in low-clearance applications.

Stainless Steel Low-Profile
Swivel-Tip Set Screws

Stainless steel set screws have excellent corrosion resistance in most environments.

T-Bolts

T-Bolts with Collar

Also known as clamping pins, these bolts have a collar that slides along the shaft and can be welded in place to clamp work in place and prevent over torquing.

T-Bolts

Also known as tank-strap bolts, these T-bolts are commonly used with a band clamp or a strap to hold fuel tanks and other objects in place.

U-Bolts

Clamping U-Bolts

Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.

Vibration-Damping U-Bolts

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.