These pinch clamps come packed in a box with individual compartments for each clamp size. Easier to install than worm-drive clamps, crimp the pinch points with pinch-clamp pincers for a secure hold. They’re commonly known as ear clamps.

Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.

A thumb screw instead of a slotted screw allows you to install these clamps without any tools.

Installing these clamps is a snap—push their interlocking teeth together with your fingers, then squeeze tight with pliers. To remove, use pliers to push sideways and separate the teeth.

Clamps offer extra holding power in high-torque applications.

Not as bulky as our other constant-tension clamps, these round-wire clamps easily fit in cramped spaces. Use in low-pressure applications.

The T-bolt design provides excellent strength and creates a 360° seal. Clamps have a spring that automatically adjusts the clamp diameter when temperatures fluctuate.

These clamps are easier to install than our Extra-Strength Low-Profile Band Clamps. Also known as center-punch clamps, they seal with a quick hammer blow to the buckle.

Clamps come packed in a box with individual compartments for each clamp size. To make sure they won’t cut into hose and tube, they have a smooth band with rolled edges.

Create 2" diameter and larger smooth-band worm-drive clamps.

The hose clamps in these assemblies have a bolt closure that creates a 360° leak-preventing seal. The clamps have rolled edges, so they won’t cut into soft hose and tube materials such as silicone.

A dimple in the ear creates spring-like action that allows these clamps to withstand vibration and temperature changes without loosening.

Don't worry about your hose and tube expanding and contracting when temperatures fluctuate—these clamps have a Bellville spring that automatically increases and decreases the clamp's diameter.