Replace the cartridge and/or filter when breathing through these half-face respirators becomes difficult.

Designed to fit easily under welding helmets. Replace the filter when breathing through these respirators becomes difficult.

These mobile respirators filter contaminants to deliver breathable air without the need for an air line connection. The pump sits on your back to allow unrestricted movement, so these respirators are often used in welding, painting, and pharmaceutical applications.

Wear these knee-length coats to stop particles, microbes, and other pollutants from contaminating a space.

Also known as bouffants, these hats and hairnets keep hair contained to reduce contamination.

Minimizing facial hair contamination, these beard covers are often used in food-processing and pharmaceutical plants.

These gloves meet ANSI/ISEA 105 standards for cut resistance. They are cleaned and bagged in environments with low levels of particulates, so they won't contaminate your work area.

Protect objects in your clean room from skin oil and other contaminants when dexterity is essential and full hand coverage is not needed.

Keep dust and other particles on your shoes from contaminating clean rooms.

Not only are these our most durable clean room wipes, they are safe to use even on delicate surfaces. They are continuous-knit polyester with ultrasonically-sealed edges to reduce possible fiber contamination.

These polypropylene wipes won't break down in the presence of most solvents and acids.

More absorbent than any other clean room wipe, these 100% rayon wipes absorb eight times their own weight. Wipes are heat resistant and have low static discharge.

Not only are these swabs adhesive and lint free, they also have excellent particle entrapment and the best solvent-holding ability of any swab.

Use these mop heads in clean rooms.

These vacuum cleaners are suitable for use in clean rooms rated to both Federal Standard and ISO classes. A micro filter protects the HEPA filter, which is 99.97% efficient at 0.3 microns.

Remove dirt, dust, and disinfectant residue from surfaces in clean rooms, including walls, floors, and stainless steel countertops. These cleaners are packaged in a clean room, sterilized, double bagged, and marked with a lot number.

Absorb spills, catch drips, and control leaks in clean room environments. These sorbents are cleaned and bagged and don’t release as much lint or dust as other sorbents.

When these sticky mats get dirty, use the cleaner to restore the dirt-grabbing surface.

Reduce the strain and fatigue of standing while working in food-processing and pharmaceutical plants, as well as in clean rooms.

Decontaminate your shoes before entering clean environments. These mats have raised edges so they can be filled with disinfecting solution.

Stainless steel chain and hooks reduce corrosion and prevent contamination.

Made of aluminum with a stainless steel bed, these conveyors are lightweight and corrosion resistant.

With spring-loaded casters, these step stools are easy to move between work areas in your clean room. They meet Class 100 clean room requirements.

Repair ceiling tiles and pass-through windows in clean rooms with this foam tape with adhesive on both sides.

This tape has adhesive on both sides and can be removed and repositioned without leaving residue behind. It meets clean room requirements.

This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.

Fasten these screws inside a high-vacuum system without bringing in contaminants.

These adjustable-height stools release minimal contaminants to meet clean room requirements.

For use in clean rooms, these adjustable-height stools relieve foot and leg strain when working in a standing position by allowing you to rest most of your weight on the seat as you work.

This paper is double-bagged to keep out contaminates and meet Class 100 clean room standards.

Without a shelf, these tables provide room to pull up a stool or chair. They withstand chemicals, grease, and repeated washdowns for use in laboratories and food-processing areas.

Often used in laboratories and food-processing areas, these tables withstand repeated washdowns and resist damage from grease and chemicals. They can be configured for either seated or standing tasks.

Often used in laboratories and food-processing plants, these workbenches resist corrosion.

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

Keep environments free of contaminants—with plastic hinge leaves and a metal pin, there's no metal-to-metal contact that can release particles as hinges open and close.

Often hung in freezers, these doors can be used in food-service environments.

These rectangular panels have gaskets that form a tight seal to keep out dust and moisture.

Protect your clean room from contaminants by moving parts, materials, and equipment in and out through these cabinets. They limit the number of people entering the clean room, which helps you comply with pharmaceutical, semiconductor, food-processing, vehicle, and air and spacecraft industry standards.

These quick-disconnect couplings mate with a sanitary stainless steel quick-clamp fitting for use in dairy lines.

Individually bagged to prevent contamination, these fittings are suitable for applications that require a high level of cleanliness.

To maintain contaminant-free standards in clean room environments, these valves come cleaned and bagged and have a 316 stainless steel body with a smooth finish to resist dust collection.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

These labels peel off easily when they're no longer needed.

Designate aisles and work zones in your clean room. Individually bagged, this tape is made to the highest standards for cleanliness, releasing minimal contaminants and leaving no residue behind.

Highly pure, this grease won't contaminate sensitive environments, so it can be used in clean rooms.

Made of 304 stainless steel to stand up to washdown environments, such as food and beverage production, these are the most corrosion-resistant vises we offer.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Lock the jaws around a workpiece and they stay clamped in a vise-like grip.

Extend the life of these tweezers by replacing the tips when they become worn. Tips are carbon fiber, which insulates against heat and won’t nick or scratch components.

The smallest bent-nose pliers we offer allow you to work in the smallest spaces, including under a microscope. They are shaped to reach around closely spaced components and other obstructions.

Made and bagged in an ISO Class 7 (10,000) clean room.

These Buna-N O-rings are made and bagged in an ISO Class 7 (10,000) clean room.