More secure than screw-pin shackles, these shackles close with a bolt that’s fastened with a nut and a cotter pin.

A lip on the shackle keeps the screw from falling out when loosened.

Secure each end with the cotter pins for temporary installations.

Indentations in the shackle body hold the head of the pin in place once fastened.

The pin doesn’t stick out from their body, so these shackles won’t snag or accidentally come undone. They have a narrow opening that restricts the movement of wire rope and chain.

Since they close with a screw pin, these shackles are quick to install and remove by hand, but should only be used in low-vibration environments where they’ll remain stationary. Their narrow opening restricts the movement of wire rope and chain.

Indentations in the shackle body hold the head of the pin in place once fastened.

The twisted shape of these shackles keeps rope and chain from twisting and knotting. And if their screw becomes loose, the lip on the shackles prevents it from falling out.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch. These shackles have a pin that screws in, so they’re quick to open and close by hand.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the clevis end.

The latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Add a clevis end to wire rope without having to fray the rope or use a compression tool.