Clamp Type Clamp Type | Show |
|---|
|
Clamp Type Clamp Type | Hide |
|---|
Material Material |
|---|
|
Clamp ID Clamp ID |
|---|
Buckle Material Buckle Material |
|---|
|
For Use With For Use With |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Maximum Clamp ID Maximum Clamp ID |
|---|
Buckle Type Buckle Type |
|---|
 |  |
| Clip On with Teeth | Set Screw |
 | |
| Clip On |
Finish Finish |
|---|
|
Specifications Met Specifications Met |
|---|
Breaking Strength Breaking Strength |
|---|
|
About Measuring Hose and Tube Clamps
What's the best way to determine the clamp size you'll need? Simply measure the outside diameter of your hose with the fitting installed. Some clamps accommodate a range of sizes, so be sure the size you need falls in the middle of that range.
More
Buckles for Build-Your-Own Low-Profile Band Clamps for Firm Hose
Designed for both permanent connections and emergency repairs, use these buckles with banding to create your own low-profile hose clamps.
Clip On—Buckles have ears for strong, reliable clamping.
Clip On with Teeth—Buckles have teeth, as well as ears, for extra gripping power.
Set Screw—Buckles are reusable.
Galvanized steel buckles have fair corrosion resistance.
201 stainless steel buckles have good corrosion resistance.
316 stainless steel buckles have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
For Band | |||||
|---|---|---|---|---|---|
| Wd. | Thick. | Reusable | Pkg. Qty. | Pkg. | |
Clip On | |||||
201 Stainless Steel | |||||
| 1/4" | 0.02" | No | 1 | 0000000 | 00000 |
| 1/4" | 0.02" | No | 100 | 0000000 | 00000 |
316 Stainless Steel | |||||
| 1/4" | 0.02" | No | 1 | 0000000 | 0000 |
| 1/4" | 0.02" | No | 100 | 0000000 | 000000 |
Clip On with Teeth | |||||
Galvanized Steel | |||||
| 1/2" | 0.03" | No | 1 | 0000000 | 000 |
| 1/2" | 0.03" | No | 100 | 0000000 | 00000 |
| 5/8" | 0.03" | No | 1 | 0000000 | 000 |
| 5/8" | 0.03" | No | 100 | 0000000 | 00000 |
| 3/4" | 0.03" | No | 5 | 0000000 | 00000 |
| 3/4" | 0.03" | No | 100 | 0000000 | 00000 |
201 Stainless Steel | |||||
| 3/8" | 0.025" | No | 1 | 0000000 | 000 |
| 3/8" | 0.025" | No | 100 | 0000000 | 00000 |
| 1/2" | 0.03" | No | 1 | 0000000 | 0000 |
| 1/2" | 0.03" | No | 100 | 0000000 | 00000 |
| 5/8" | 0.03" | No | 1 | 0000000 | 0000 |
| 5/8" | 0.03" | No | 100 | 0000000 | 000000 |
| 3/4" | 0.03" | No | 1 | 0000000 | 0000 |
| 3/4" | 0.03" | No | 100 | 0000000 | 000000 |
| 3/4" | 0.044" | No | 1 | 0000000 | 0000 |
| 3/4" | 0.044" | No | 25 | 0000000 | 00000 |
| 1" | 0.044" | No | 1 | 0000000 | 0000 |
| 1" | 0.044" | No | 25 | 0000000 | 000000 |
| 1 1/4" | 0.044" | No | 1 | 0000000 | 0000 |
| 1 1/4" | 0.044" | No | 25 | 0000000 | 000000 |
316 Stainless Steel | |||||
| 3/8" | 0.025" | No | 1 | 0000000 | 0000 |
| 3/8" | 0.025" | No | 100 | 0000000 | 000000 |
| 1/2" | 0.03" | No | 1 | 0000000 | 0000 |
| 1/2" | 0.03" | No | 100 | 0000000 | 000000 |
| 5/8" | 0.03" | No | 1 | 0000000 | 0000 |
| 5/8" | 0.03" | No | 100 | 0000000 | 000000 |
| 3/4" | 0.03" | No | 1 | 0000000 | 0000 |
| 3/4" | 0.03" | No | 100 | 0000000 | 000000 |
| Each | |||||
Set Screw | |||||
201 Stainless Steel | |||||
| 1/4" | 0.02" | Yes | __ | 0000000 | 0000 |
| 3/8" | 0.025" | Yes | __ | 0000000 | 0000 |
| 1/2" | 0.03" | Yes | __ | 0000000 | 0000 |
| 5/8" | 0.03" | Yes | __ | 0000000 | 0000 |
| 3/4" | 0.044" | Yes | __ | 0000000 | 0000 |
Banding for Build-Your-Own Low-Profile Band Clamps for Firm Hose
Keep this banding on hand for both permanent connections and emergency repairs. You'll need an installation tool and a buckle (both sold separately) to create a band clamp. Banding comes in a dispenser carton. It has smooth, rounded edges to protect your hose from cuts.
Galvanized steel banding has fair corrosion resistance.
201 stainless steel banding has good corrosion resistance.
304 stainless steel banding has very good corrosion resistance.
316 stainless steel banding has excellent corrosion resistance.
Black polyester-coated 201 stainless steel banding has excellent abrasion and UV resistance.
Note: The breaking strength listed is the maximum tension that can be applied to the banding. For an extra-strong clamp, wrap the banding around twice, threading it through the buckle each time.
For technical drawings and 3-D models, click on a part number.
Band | 100-ft. Lg. | 200-ft. Lg. | |||||
|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Breaking Strength, lbs. | Reusable | Each | Each | ||
Galvanized Steel | |||||||
| 1/2" | 0.03" | 1,125 | No | 0000000 | 000000 | 000000 | 00 |
| 5/8" | 0.03" | 1,400 | No | 0000000 | 00000 | 000000 | 00 |
| 3/4" | 0.03" | 1,600 | No | 0000000 | 000000 | 000000 | 00 |
201 Stainless Steel | |||||||
| 1/4" | 0.02" | 500 | No | 0000000 | 00000 | 000000 | 00 |
| 3/8" | 0.025" | 900 | No | 0000000 | 000000 | 000000 | 00 |
| 1/2" | 0.03" | 1,500 | No | 0000000 | 000000 | 000000 | 00 |
| 5/8" | 0.03" | 1,800 | No | 0000000 | 000000 | 000000 | 00 |
| 3/4" | 0.03" | 2,250 | No | 0000000 | 000000 | 000000 | 00 |
| 3/4" | 0.044" | 3,300 | No | 0000000 | 000000 | 000000 | 00 |
| 1" | 0.044" | 4,400 | No | 0000000 | 000000 | 000000 | 00 |
| 1 1/4" | 0.044" | 5,500 | No | 0000000 | 000000 | 000000 | 00 |
304 Stainless Steel | |||||||
| 3/8" | 0.02" | 600 | No | 000000 | 00 | 0000000 | 0000000 |
| 1/2" | 0.02" | 850 | No | 000000 | 00 | 0000000 | 000000 |
| 5/8" | 0.02" | 1,000 | No | 000000 | 00 | 0000000 | 000000 |
| 3/4" | 0.02" | 1,275 | No | 000000 | 00 | 0000000 | 000000 |
316 Stainless Steel | |||||||
| 1/4" | 0.02" | 400 | No | 0000000 | 000000 | 000000 | 00 |
| 3/8" | 0.025" | 750 | No | 0000000 | 000000 | 000000 | 00 |
| 1/2" | 0.03" | 1,200 | No | 0000000 | 000000 | 000000 | 00 |
| 5/8" | 0.03" | 1,500 | No | 0000000 | 000000 | 000000 | 00 |
| 3/4" | 0.03" | 1,800 | No | 0000000 | 000000 | 000000 | 00 |
Black Polyester-Coated 201 Stainless Steel | |||||||
| 3/4" | 0.03" | 2,250 | No | 0000000 | 000000 | 000000 | 00 |
Low-Profile Band Clamps for Firm Hose
Easier to install than our Extra-Strength Low-Profile Band Clamps, these clamps seal with a quick hammer blow to the buckle. They are also known as center-punch clamps.
Unlike worm-drive clamps and bolt clamps, these have a low profile with no protruding parts to get in your way during installation. The banding is double wrapped for extra strength. Use them to secure firm plastic and rubber hose, coaxial cable, and rope. Clamps require an installation tool (sold separately).
Galvanized steel clamps offer fair corrosion resistance.
201 and 300 series stainless steel clamps have very good corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Clamp ID Range | Band | Temperature Range, °F | ||||||
|---|---|---|---|---|---|---|---|---|
| Inch | mm | Wd. | Thick. | Min. | Max. | Reusable | Each | |
Galvanized Steel with 201 Stainless Steel Buckle | ||||||||
| 5/8" to 13/16" | 15.9 to 20 | 3/8" | 0.025" | -100° | 300° | No | 0000000 | 00000 |
| 5/8" to 1 3/8" | 15.9 to 35 | 3/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 1" | 19.1 to 25 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 1 1/4" | 19.1 to 32 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 1 1/2" | 19.1 to 38 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 1 3/4" | 19.1 to 44 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 2" | 19.1 to 51 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 2 1/4" | 19.1 to 57 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 2 1/2" | 19.1 to 63 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 2 3/4" | 19.1 to 70 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 3" | 19.1 to 76 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 3 1/2" | 19.1 to 89 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 4" | 19.1 to 101 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 4 1/2" | 19.1 to 114 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 5" | 19.1 to 127 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 6" | 19.1 to 152 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 6 1/2" | 19.1 to 165 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 7" | 19.1 to 178 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 8" | 19.1 to 203 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
201 Stainless Steel with 201 Stainless Steel Buckle | ||||||||
| 5/8" to 13/16" | 15.9 to 20 | 3/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 5/8" to 1 3/8" | 15.9 to 35 | 3/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 1" | 19.1 to 25 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 1 1/4" | 19.1 to 32 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 1 1/2" | 19.1 to 38 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 1 3/4" | 19.1 to 44 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 2" | 19.1 to 51 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 2 1/4" | 19.1 to 57 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 2 1/2" | 19.1 to 63 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 2 3/4" | 19.1 to 70 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 3" | 19.1 to 76 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 3 1/2" | 19.1 to 89 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 4" | 19.1 to 101 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 4 1/2" | 19.1 to 114 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 5" | 19.1 to 127 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 6" | 19.1 to 152 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 6 1/2" | 19.1 to 165 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 7" | 19.1 to 178 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 8" | 19.1 to 203 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
300 Series Stainless Steel with 302 Stainless Steel Buckle | ||||||||
| 5/8" to 13/16" | 15.9 to 20 | 3/8" | 0.02" | Not Rated | 800° | No | 0000000 | 0000 |
| 5/8" to 1 3/8" | 15.9 to 35 | 3/8" | 0.02" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 1" | 19.1 to 25 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 1 1/4" | 19.1 to 32 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 1 1/2" | 19.1 to 38 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 1 3/4" | 19.1 to 44 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 2" | 19.1 to 51 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 2 1/4" | 19.1 to 57 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 2 1/2" | 19.1 to 63 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 2 3/4" | 19.1 to 70 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 3" | 19.1 to 76 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 3 1/2" | 19.1 to 89 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 4" | 19.1 to 101 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 4 1/2" | 19.1 to 114 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 5" | 19.1 to 127 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 6" | 19.1 to 152 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 7" | 19.1 to 178 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 8" | 19.1 to 203 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
Extra-Strength Low-Profile Band Clamps for Firm Hose
The end of the band curls back into the buckle—this gives these clamps up to 25% more strength than other low-profile clamps. They are also known as JS-style clamps. Unlike worm-drive clamps and bolt clamps, these have a low profile with no protruding parts. A smooth interior prevents damage to the hose. Clamps are for firm plastic and rubber hose. They require an installation tool (sold separately).
Galvanized steel offers fair corrosion resistance.
201 stainless steel has good corrosion resistance.
316 stainless steel has excellent corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Clamp ID Range | Band | |||||||
|---|---|---|---|---|---|---|---|---|
| Inch | mm | Wd. | Thick. | Temperature Range, °F | Reusable | Specifications Met | Each | |
Galvanized Steel with 201 Stainless Steel Buckle | ||||||||
| 5/8" to 13/16" | 15.9 to 20 | 3/8" | 0.025" | -100° to 300° | No | SAE J1508 | 0000000 | 00000 |
| 5/8" to 1" | 15.9 to 25 | 3/8" | 0.025" | -100° to 300° | No | SAE J1508 | 0000000 | 000 |
| 5/8" to 1 3/8" | 15.9 to 35 | 3/8" | 0.025" | -100° to 300° | No | SAE J1508 | 0000000 | 000 |
| 5/8" to 2" | 15.9 to 50 | 3/8" | 0.025" | -100° to 300° | No | SAE J1508 | 0000000 | 000 |
| 3/4" to 1" | 19.1 to 25 | 1/2" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 000 |
| 3/4" to 1 1/4" | 19.1 to 32 | 1/2" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 000 |
| 1 1/4" to 1 1/2" | 32 to 38 | 5/8" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 0000 |
| 1 1/4" to 1 3/4" | 32 to 44 | 5/8" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 0000 |
| 1 1/4" to 2" | 32 to 51 | 5/8" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 0000 |
| 1 1/4" to 2 1/4" | 32 to 57 | 5/8" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 0000 |
| 1 1/4" to 2 1/2" | 32 to 63 | 5/8" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 2 3/4" | 44 to 70 | 3/4" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 3" | 44 to 76 | 3/4" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 3 1/2" | 44 to 89 | 3/4" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 4" | 44 to 101 | 3/4" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 4 1/2" | 44 to 114 | 3/4" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 5" | 44 to 127 | 3/4" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 7" | 44 to 178 | 3/4" | 0.03" | -100° to 300° | No | SAE J1508 | 0000000 | 0000 |
201 Stainless Steel with 201 Stainless Steel Buckle | ||||||||
| 1/2" to 1 3/8" | 12.7 to 35 | 1/4" | 0.02" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 5/8" to 13/16" | 15.9 to 20 | 3/8" | 0.025" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 5/8" to 1" | 15.9 to 25 | 3/8" | 0.025" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 5/8" to 1 3/8" | 15.9 to 35 | 3/8" | 0.025" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 5/8" to 2" | 15.9 to 50 | 3/8" | 0.025" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 3/4" to 1" | 19.1 to 25 | 1/2" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 3/4" to 1 1/4" | 19.1 to 32 | 1/2" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 13/16" to 1" | 20.6 to 25.4 | 1/4" | 0.02" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 13/16" to 2" | 20.6 to 50.8 | 1/4" | 0.02" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 1/4" to 1 1/2" | 32 to 38 | 5/8" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 1/4" to 1 3/4" | 32 to 44 | 5/8" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 1/4" to 2" | 32 to 51 | 5/8" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 1/4" to 2 1/4" | 32 to 57 | 5/8" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 1/4" to 2 1/2" | 32 to 63 | 5/8" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 2 3/4" | 44 to 70 | 3/4" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 3" | 44 to 76 | 3/4" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 3 1/2" | 44 to 89 | 3/4" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 4" | 44 to 101 | 3/4" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 4 1/2" | 44 to 114 | 3/4" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 5" | 44 to 127 | 3/4" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 6" | 44 to 152 | 3/4" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 0000 |
| 1 3/4" to 7" | 44 to 178 | 3/4" | 0.03" | -100° to 500° | No | SAE J1508 | 0000000 | 00000 |
316 Stainless Steel with 316 Stainless Steel Buckle | ||||||||
| 5/8" to 13/16" | 15.9 to 20 | 3/8" | 0.025" | -100° to 600° | No | SAE J1508 | 0000000 | 0000 |
| 5/8" to 1 3/8" | 15.9 to 35 | 3/8" | 0.025" | -100° to 600° | No | SAE J1508 | 0000000 | 0000 |
| 5/8" to 2" | 15.9 to 50 | 3/8" | 0.025" | -100° to 600° | No | SAE J1508 | 0000000 | 0000 |
| 3/4" to 1 1/4" | 19.1 to 32 | 1/2" | 0.03" | -100° to 600° | No | SAE J1508 | 0000000 | 0000 |
| 1 1/4" to 1 1/2" | 32 to 38 | 5/8" | 0.03" | -100° to 600° | No | SAE J1508 | 0000000 | 0000 |
| 1 1/4" to 1 3/4" | 32 to 44 | 5/8" | 0.03" | -100° to 600° | No | SAE J1508 | 0000000 | 00000 |
| 1 1/4" to 2 1/2" | 32 to 63 | 5/8" | 0.03" | -100° to 600° | No | SAE J1508 | 0000000 | 00000 |
| 1 3/4" to 3" | 44 to 76 | 3/4" | 0.03" | -100° to 600° | No | SAE J1508 | 0000000 | 00000 |
| 1 3/4" to 4" | 44 to 101 | 3/4" | 0.03" | -100° to 600° | No | SAE J1508 | 0000000 | 00000 |
| 1 3/4" to 4 1/2" | 44 to 114 | 3/4" | 0.03" | -100° to 600° | No | SAE J1508 | 0000000 | 00000 |
| 1 3/4" to 5" | 44 to 127 | 3/4" | 0.03" | -100° to 600° | No | SAE J1508 | 0000000 | 00000 |
| Each | ||
| Wing-Handle Installation Tool | 0000000 | 0000000 |