Stainless Steel Clips

Also known as poodle rings, these thick rings have "ears" that form a large retaining surface to withstand stronger forces than other side-mount retaining rings.

External Retaining Rings

Open these rings, pass them over the end of a shaft, and release to spring into the groove.

Heavy Duty External Retaining Rings

Thicker than standard external retaining rings, these rings withstand greater force.

Mil. Spec. External Retaining Rings

These rings meet military specification MS 16624.

Push-On External Retaining Rings

No groove required—press these rings onto the end of a shaft for a firm grip.

Push-On Retaining Caps

Use these caps to hold components in place and protect shaft ends.

Heavy Duty Spiral External Retaining Rings

Thicker than standard spiral rings, these rings withstand greater forces.

Single-Turn Spiral External Retaining Rings

Slide these rings into place with one twist—no tools required—for applications with high thrust loads.

Spiral External Retaining Rings

These coiled rings can be wound into place on a shaft without tools.

Crimp-On External Retaining Rings

Also known as X-washers, place these rings into the groove and squeeze tight with pliers to form a 360° closure.

Internal Retaining Rings

Squeeze these rings to place them in the groove inside a bore or housing.

Single-Turn Spiral Internal Retaining Rings

Slide these rings into place by hand with a single twist for applications with high thrust loads.

Heavy Duty Spiral Internal Retaining Rings

Thicker than standard spiral rings, these rings withstand greater forces.

Spiral Internal Retaining Rings

These coiled rings can be wound into place inside a bore or housing without tools.

Push-On Internal Retaining Rings

No groove required—these rings have teeth that firmly grip the bore.

Pins

Hairpin Cotter Pins

Also known as hitch pin clips and R-clips, these pins are easy to install and remove.

Strong-Hold Hairpin Cotter Pins

A coil makes a stronger grip than standard hairpin cotter pins to prevent accidental release.

Hairpin Clips

Clip these pins onto grooved shafts and clevis pins with retaining ring grooves.

Strong-Hold Wire-Snap Cotter Pins

These pins are coiled for more tension than standard wire-snap cotter pins.

Wire Snap Cotter Pins

Also known as safety pins, these are easy to install and remove. Tension keeps them closed.

Cotter Pins

Also known as split pins, these have one prong slightly longer than the other so they’re easy to open. Bend prongs outward to secure.

Linch Pins

Slide the pin through a hole then snap the ring down to lock these pins in place. Also known as click pins.

Locking Cotter Pins

An extra loop locks these cotter pins more securely than other pins, so they can't vibrate out or be knocked off.

Bow Tie Cotter Pins

The double-head design lets you push or pull these pins from either side of the hole. Once in place there's little chance they will be vibrated out or knocked off.

Split Rings

Also known as key rings, twist these rings into place to secure clevis pins, connect components, or add a pull handle. They don't have the sharp ends of other cotter pins.

Wire-Lock Clevis Pins

The wire retainer snaps closed to secure the pin for a one-piece alternative to a clevis and cotter pin combination. Also known as PTO pins.

Button Pins for Telescoping Tubing

Spring force holds pieces of telescoping tubing together. Also known as snap buttons and tubing buttons.

Loop-Grip Clevis Pins

A large loop handle makes these pins easy to grip.

Nuts

Rectangular Push Nuts

Also known as flat-style speed nuts, these have large sides, so they're easy to push over threads by hand.

Stainless Steel Snap-In Nuts

Stainless steel snap-in nuts have excellent corrosion resistance in most environments.

Stainless Steel Slip-On Twist-Close Nuts

Stainless steel nuts have excellent corrosion resistance in most environments.

Fastener Assortments

Side-Mount External Retaining Ring Assortments

Also known as E-Style and C-style rings, slide these into the groove from the side of the shaft. They provide a wider shoulder than other external retaining rings for a larger retaining surface.

External Retaining Ring Assortments

Pull these rings open with retaining ring pliers, pass over the end of a shaft, and release to spring into a groove.

External and Internal Retaining Ring Assortments

Assortments include pliers to install external and internal rings.

External and Internal Spiral Retaining Ring Assortments

Wind these retaining rings into a groove—no tools required for installation.

Internal Retaining Ring Assortments

Pull ring ends together with retaining ring pliers and place into the bore of a shaft or housing.

Hairpin Cotter Pin Assortments

Also known as hitch pin clips and R-clips, use these cotter pins in applications requiring quick installation and removal.

Cotter Pin Assortments

Also known as split pins, these have one prong slightly longer than the other so they’re easy to open.

Captive Panel Screws

Flush-Mount Press-Fit Captive Panel Screws

These screws mount flush against the outer panel's surface for low-clearance applications.

Socket Head Captive Panel Screws

Install these socket head screws through a hole and thread on a retainer to keep secure—no special tools are required.

Thumb-Screw-Head Captive Panel Screws

Install these thumb-screw-head screws through a hole and thread on a retainer to keep secure—no special tools are required.

Rounded Head Captive Panel Screws

Install these rounded head screws through a hole and thread on a retainer to keep secure—no special tools are required.

Hog Rings

Squeeze these rings closed for use as sack closures, in tagging applications, and for repairing fences.

Routing Clamps

For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.

Strut-Mount Metal Routing Clamps

Route pipe, tubing, and conduit across strut channel.

Vibration-Damping Routing Clamps

A rubber cushion reduces vibration and wear from clamp edges. The cushion also protects lines of pipe, tubing, and conduit from corrosion caused by metal-to-metal contact.

Strut-Mount Vibration-Damping Routing Clamps

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Rails for Rail-Mount Vibration-Damping Routing Clamps

Bolt or weld these rails to the mounting surface, then attach clamps with a rail nut.

Cut-to-Length Routing Clamps

Customize these clamps to any object—they have a bend-and-stay design so you can mold them to the size and shape you need. Made of plastic-coated 316 stainless steel, they withstand abrasion, corrosion, and UV rays.

Vibration-Damping Loop Clamps

A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.

Multiline Vibration-Damping Loop Clamps

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

Snug-Fit Vibration-Damping Loop Clamps

A molded cushion reduces vibration and wear from clamp edges, plus it provides a tighter fit around material than standard vibration-damping loop clamps.

Loop Clamps

These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.

Adjustable Standoff Clamps

Tighten the bolt for an exact fit around material. Clamps secure vertical pipes in sanitation drain applications and prevent them from coming in contact with the mounting surface.

Riser Clamps

Support vertical pipes passing through floors.

U-Bolts

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.

U-Bolts with Mounting Plates

A mounting plate provides a more secure hold at the mounting surface.

U-Bolt Mounting Plates

Add a mounting plate to your U-bolt for a more secure hold at the mounting surface.

Square U-Bolts

Suspend and route flat-bottomed objects such as strut channel and small duct.

Rubber-Cushioned U-Bolts

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to dissemble it.

Clamping U-Bolts

Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.

Vibration-Damping U-Bolts

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

Rubber-Cushioned Square U-Bolts

Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.

Beam Clamps

Beam Clamps for Threaded Rod

Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.

Center-Mount Beam Clamps for Threaded Rod

For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.

Beam Clamps for Pipe, Tube, and Conduit

These clamps have a fixed hanger for rigid connections.

Beam Clamps for Strut Channel

Support strut channel at a right angle to the beam.

Hangers for Pipe, Tube, and Conduit

Threaded-Rod-Mount Clamping Hangers

Also known as conduit hangers, these hangers load from the bottom so you can add or remove material without removing the mounted hanger.

Stackable Threaded-Rod-Mount Clamping Hangers

Mount these hangers on top of one another to organize multiple lines of pipe, tubing, and conduit at any angle.

Snug-Hold Threaded-Rod-Mount Clamping Hangers

Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers.

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean.

Pivoting Threaded-Rod-Mount Loop Hangers

Also known as clevis hangers, these have a pivoting loop that adjusts for line movement and vibration. Combine with a threaded rod or other fastener to hang from the ceiling.

Stainless Steel Threaded-Rod-Mount Loop Hangers

Use these hangers in corrosive environments and where chemicals are present. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Side-Load Threaded-Rod-Mount Loop Hangers

Access material quickly without uninstalling the mounted hanger. These hangers have a removable bolt for loading pipe, tube, and conduit from the side. Combine them with a threaded rod or other fastener to hang from the ceiling.

Strap Hangers

Cut as much strap as you need to hang duct, pipe, and other materials.

Weld-Mount Clamping Hangers

For a strong, secure connection, mount these hangers by welding them to a rod.

Routing Ringbolts

Mount these ringbolts into a threaded hole, or use the nut for through-hole mounting. The pivoting ring allows material to move freely.

Threaded Rod Mounts

Fasten these brackets to ceilings, walls, beams, and joists to hang threaded rod.

Floor Routing Supports

Floor-Mount Saddle-Style Supports

These U-shaped supports allows access to pipe and conduit after installation.

Floor-Mount Clamp-Style Supports

For a secure hold on pipe and conduit suspended above the ground, these supports have a cushioned clamp provides a 360° grip while reducing vibration.

Floor-Mount Flange-Style Supports

Bolt directly to a pipe flange to suspend a run of pipe above the ground.

Rope and Chain Connectors

Snaps with Swivel Eye

These snaps have an eye that rotates for easy positioning.

Snaps with Eye

Create fast connections with items, such as rope, chain, and straps.

Light Duty Snaps with Swivel Eye for Webbing

Load-Rated Snaps with Eye

Load-Rated Snaps with Swivel Eye

Slide-Bolt Snaps with Swivel Eye

Dual Slide-Bolt Snaps

Slide-Bolt Snaps with Hook

Overlapping-Arm Snaps with Swivel Eye

The force of the load helps keep the arms closed. Press the trigger for quick connection and disconnection.

Carabiners—Not for Lifting

Screw-Locking Carabiners—Not for Lifting

Lock by screwing the latch into the body.

Twist-Locking Carabiners—Not for Lifting

To open, lift and twist the latch 90°.

Slide-Release Carabiners—Not for Lifting

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

Oval-Shaped Threaded
Connecting Links—Not for Lifting

Also known as quick links, screw the nut onto the threaded end to attach end fittings.

Pear-Shaped Threaded
Connecting Links—Not for Lifting

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Square-Shaped Threaded
Connecting Links—Not for Lifting

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Triangle-Shaped Threaded
Connecting Links—Not for Lifting

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

S-Hooks with Latches on Both Ends—Not for Lifting

The spring-loaded latches on these hooks snap back into place, securing your load.

S-Hooks with Latch on One End—Not for Lifting

For extra security, these have a latch that snaps back into place to secure your load.These have excellent resistance to salt water and chemicals.

Pin-Release Eye Shackles—Not for Lifting

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.

Pin-Release Clevis Shackles—Not for Lifting

Attach a rope to the ring on the pin for remote release where access in limited. These shackes have a clevis end for making pivoting connections.

Wire Rope Clamps

Forged Stainless Steel Single-Saddle
Wire Rope Clamps—Not for Lifting

These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.

Cast Wire Rope Clamps—Not for Lifting

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Easy-Install Wire Rope Clamps—Not for Lifting

Make a removable loop without specialty tools for use in noncritical applications, such as fencing. Also known as tiller clamps.

Office Supplies

Bulldog Clips

Secure small objects with these clips.

Binder Clips

Hold lightweight objects, secure covers, and seal bags in sanitary and corrosive environments.

Clipboards

Containers, Storage, and Furniture

Holders

Store tools such as brooms, cordless drills, screwdrivers, and flashlights.

Holder Racks

Racks have multiple holders to organize items.

Magnet-Mount Holders

Store tools such as brooms, screwdrivers, and flashlights with these holders that attach to magnetic surfaces.

Snap-Close Hooks

The spring-loaded latch on these hooks snaps closed to hold items securely.

Pegboard Holders

Store tools such as pliers, screwdrivers, and hammers.

Pegboard Assortments

Assortments include enough pieces to set up an entire pegboard.

Standards and Shelf Supports
for Cabinets and Bookcases

These standards can be surface mounted or flush mounted inside a routed groove.

Building and Machinery Hardware

Snap-Down Draw Latches

These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.

Panel-Hanging Brackets

Often used in washrooms, these brackets mount panels and partitions.

Any-Thickness Panel-Hanging Brackets

The two-piece design accommodates a wide range of panel thicknesses.

Bend-and-Stay Positioning Arms

Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.

Tag Holders

Tag Rings

Loop these rings onto tags.

Safety Pins

Fasten tags, labels and other objects to fabric.

Clamps for Firm Hose and Tube

General Purpose Worm-Drive
Clamps for Firm Hose and Tube

Clamps have a slotted screw. Tighten with a slotted screwdriver, hex nut driver, or a wrench.

General Purpose Worm-Drive Clamp
Assortments for Firm Hose and Tube

General Purpose Worm-Drive Clamps with
Nonslip Screw for Firm Hose and Tube

A raised safety collar around the head of the screw prevents your screwdriver from slipping and damaging the hose or tube.

General Purpose Worm-Drive Clamps with
Thumb Screw for Firm Hose and Tube

A thumb screw instead of a slotted screw allows you to install these clamps without any tools.

General Purpose Bolt Clamps for Firm Hose

One clamp fits a wide range of diameters, so you can always have the right size on hand.

Build-Your-Own Worm-Drive
Clamps for Firm Hose and Tube

Here's everything you need to make your own 3" diameter and larger custom-length worm-drive clamps.

Vibration-Resistant Pinch
Clamps for Firm Hose and Tube

These clamps are easier to install than worm-drive clamps—crimp the pinch points with pinch-clamp pincers for a secure hold. They are also known as ear clamps.

Vibration-Resistant Pinch Clamp
Assortments for Firm Hose and Tube

These pinch clamps come packed in a box with individual compartments for each clamp size. Easier to install than worm-drive clamps, crimp the pinch points with pinch-clamp pincers for a secure hold. They’re commonly known as ear clamps.

Tight-Seal Vibration-Resistant Pinch
Clamps for Firm Hose and Tube

Unlike other pinch clamps, these have a unique tongue-and-groove design that creates a gap-free seal to reduce leaks.

Vibration-Resistant Worm-Drive
Clamps for Firm Hose and Tube

Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.

Constant-Tension Spring
Clamps for Firm Hose and Tube

Not as bulky as our other constant-tension clamps, these round-wire clamps easily fit in cramped spaces. Use in low-pressure applications.

Constant-Tension Bolt Clamps for Firm Hose and Tube

The T-bolt design provides excellent strength and creates a 360° seal. Clamps have a spring that automatically adjusts the clamp diameter when temperatures fluctuate.

Extra-Strength Low-Profile Band Clamps for Firm Hose

The end of the band curls back into the buckle—this gives these clamps up to 25% more strength than other low-profile clamps. They are also known as JS-style clamps.

Buckles for Build-Your-Own Low-Profile
Band Clamps for Firm Hose

Designed for both permanent connections and emergency repairs, use these buckles with banding to create your own low-profile hose clamps.

Banding for Build-Your-Own
Low-Profile Band Clamps for Firm Hose

Keep this banding on hand for both permanent connections and emergency repairs. You'll need an installation tool and a buckle (both sold separately) to create a band clamp.

Low-Profile Band Clamps for Firm Hose

These clamps are easier to install than our Extra-Strength Low-Profile Band Clamps. Also known as center-punch clamps, they seal with a quick hammer blow to the buckle.

Tight-Seal Bolt Clamps for Firm Hose and Tube

These clamps form a 360° seal around your hose or tube to prevent leaks.

Quick-Release Clamps for Firm Hose and Tube

Clamps have a slotted hex-head screw that flips up to release the band for quick opening.

Clamps for Soft Hose and Tube

Worm-Drive Clamps with Smooth
Bands for Soft Hose and Tube

Clamps have a smooth band with rolled edges to prevent them from cutting into your hose or tube.

Worm-Drive Smooth-Band Clamp
Assortments for Soft Hose and Tube

Clamps come packed in a box with individual compartments for each clamp size. To make sure they won’t cut into hose and tube, they have a smooth band with rolled edges.

Worm-Drive Clamps for Soft Hose and Tube

An extended tail acts as a liner to protect soft hose and tube from being cut by the slots in the band.

High-Temperature Build-Your-Own
Worm-Drive Clamps for Soft Hose and Tube

Create 4" diameter and larger worm-drive clamps that withstand high-temperature applications.

Build-Your-Own Worm-Drive
Clamps for Soft Hose and Tube

Create 2" diameter and larger smooth-band worm-drive clamps.

Tight-Seal Bolt Clamps for Soft Hose and Tube

The bolt design provides high strength and creates a 360° seal to prevent leaks.

Tight-Seal Bolt Clamp Assortments
for Soft Hose and Tube

The hose clamps in these assemblies have a bolt closure that creates a 360° leak-preventing seal. The clamps have rolled edges, so they won’t cut into soft hose and tube materials such as silicone.

Tight-Seal Easy-Install Bolt
Clamps for Soft Hose and Tube

Remove the bolt and flip open the hinged bridge to install.

Vibration-Resistant Pinch
Clamps for Soft Hose and Tube

A dimple in the ear creates spring-like action that allows these clamps to withstand vibration and temperature changes without loosening.

Quick-Release Clamps for Soft Hose and Tube

These clamps have rounded edges and a smooth interior, so they won’t cut into soft hose and tube materials such as silicone. Flip up the slotted hex head screw to quickly release the band.

Constant-Tension Clamps for Soft Hose and Tube

Don't worry about your hose and tube expanding and contracting when temperatures fluctuate—these clamps have a Bellville spring that automatically increases and decreases the clamp's diameter.

Duct Hose Clamps

Work-Load-Rated Quick-Release Duct Hose Clamps

Unlike other duct hose clamps, these are rated for a maximum work load. Clamps have a quick-release latch that lets you access your line frequently while maintaining your original clamp size.

Duct Hose Clamps for Spiral Duct

Also known as bridge clamps, these worm-drive clamps align with the spiral support on wire duct hose to provide a tight seal.

Duct Hose Clamps with Grounding Cable

Prevent static charge buildup while securely connecting duct hose with a wire spiral.

Sew-On Hooks for Webbing

Permanently sew webbing onto these hooks.

Grating and Flooring

Fasteners for Metal Bar Grating

Secure grating to your support structure.

Fasteners for Fiberglass Bar Grating

Secure grating to your support structure.

Fasteners for Plank Grating

Secure grating to your support structure.

Fasteners for Solid Grating

Secure grating to your support structure.

DIN Rails

Mount terminal blocks, power supplies, relays, and other control and distribution devices on walls and other flat surfaces and in enclosures.

Light Duty Metal Strapping

Use this metal strapping for securing pipe coverings as well as for packaging.

Shower Curtain Hooks

Lacing for Conveyor Belts

Quick-Install Hook-Style Lacing

Hammer-On Hook-Style Lacing

This low-profile lacing requires only a hammer to install so it's good for repairs and tight spaces. Also known as alligator lacing, the lacing teeth bite into the belt to hold. Use on belts up to 0.31" thick.

Connecting Pins for Hammer-On Hook-Style Lacing

Insert a pin into the lacing and lock it in place by bending the ends at a 90° angle.

Staple-Style Lacing

Also known as alligator lacing, this strong, impact-resistant lacing uses a staple driver and installation guide to secure staples. Use on 0.0625" to 0.25" thick belts.

Bolt-On Lacing

Our heaviest duty lacing uses bolts and nuts to repair and extend 0.25" to 0.625" thick belts.

Quick-Stop Fall-Arrest Lanyards

A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance as it will stop your fall within a few inches.

Alligator Lacing Sets for Flat Belts

Often used to join conveyor belt seams, use this lacing for a tight hold with uniform tension across the width of your belt.