Length Length |
|---|
ID ID |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Mount Type Mount Type | Show |
|---|
|
Mount Type Mount Type | Hide |
|---|
Overall Height Overall Height |
|---|
|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
UV Protection UV Protection |
|---|
|
Cable Tie Style Cable Tie Style |
|---|
 | Extra Wide |
Useful Life Useful Life |
|---|
|
Height Height |
|---|
|
|
|
Capacity Capacity |
|---|
|
|
Selecting Clamps Using Pipe, Conduit, or Tubing Trade Size
More
Multiline Plastic Routing Clamps
Organize multiple lines of pipe, tubing, or hose with a single clamp. Clamps have good chemical and UV resistance.
Clamps for ten lines have a mounting hole on the bottom of each slot and can be cut to the number of lines you need.
Use clamps with an adhesive back to mount on smooth surfaces without the need for fasteners. They can also be used with mounting fasteners for extra holding power.
For technical drawings and 3-D models, click on a part number.
ID | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Number of Lines | Inch | Metric, mm | Color | Lg. | Wd. | Ht. | Fasteners Included | Hole Dia. | Temp. Range, °F | For Use Outdoors | Each | |
Polyethylene Plastic | ||||||||||||
Adhesive Back, Screw On | ||||||||||||
| 10 | 5/32" | 4 | Black | 4" | 5/8" | 3/8" | No | 7/64" | -80° to 240° | Yes | 0000000 | 00000 |
| 10 | 3/16" | 5 | Black | 4" | 5/8" | 3/8" | No | 7/64" | -80° to 240° | Yes | 0000000 | 0000 |
| 10 | 1/4" | 6 | Black | 4" | 5/8" | 3/8" | No | 7/64" | -80° to 240° | Yes | 0000000 | 0000 |
Adhesive-Back Plastic Routing Clamps
Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.
For technical drawings and 3-D models, click on a part number.
ID | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Mounting Points | Inch | Metric, mm | For Pipe Size  | Color | Lg. | Wd. | Ht. | Thick. | Temp. Range, °F | For Use Outdoors | Pkg. Qty. | Pkg. | |
Nylon Plastic | |||||||||||||
| 1 | 1/8" | 3 | __ | White | 1/2" | 3/8" | 3/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
| 1 | 1/4" | 6 | __ | White | 7/8" | 1/2" | 5/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 0000 |
| 1 | 3/8" | 10 | __ | White | 1" | 5/8" | 7/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
| 1 | 1/2" | 13 | 1/8 | White | 1 1/8" | 3/4" | 9/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
| 2 | 1/8" | 3 | __ | White | 3/4" | 3/8" | 3/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
| 2 | 1/4" | 6 | __ | White | 1 7/16" | 1/2" | 5/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
| 2 | 3/8" | 10 | __ | White | 1 9/16" | 5/8" | 7/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
| 2 | 1/2" | 13 | 1/8 | White | 1 5/8" | 3/4" | 9/16" | 1/16" | -20° to 150° | No | 25 | 0000000 | 00000 |
Adhesive-Mount Vibration-Damping Routing Clamps
Avoid the hassle of welding with these adhesive-mount clamps—they use a high-strength adhesive to form a permanent bond with the mounting surface, no additional tools required. The adhesive hardens enough to complete assembly after 30 minutes and becomes fully cured after 24 hours. Once assembled, the clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Plates are 316 stainless steel for excellent corrosion and chemical resistance.
Adhesive bonds to most metal and composites. The container size listed is the combined total of the two-part cartridge. Use a dispensing gun and nozzle to simultaneously mix and dispense the adhesive. All components are sold separately.
For technical drawings and 3-D models, click on a part number.
ID | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size | Color | Lg. | Wd. | Ht. | Max. Pressure, psi | Temp. Range, °F | Clamping Fasteners Included | For Use Outdoors | Specifications Met | Each | |
Polypropylene Plastic | |||||||||||||
316 Stainless Steel Top and Bottom Plates | |||||||||||||
| 1/4" | 6 | __ | Green | 1 7/16" | 1 3/16" | 1 7/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 000000 |
| 3/8" | 10 | __ | Green | 1 7/16" | 1 3/16" | 1 7/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 1/2" | 13 | 1/8 | Green | 1 5/8" | 1 3/16" | 1 11/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 9/16" | 14 | 1/4 | Green | 1 5/8" | 1 3/16" | 1 11/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 5/8" | 16 | 1/4 | Green | 1 5/8" | 1 3/16" | 1 11/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 11/16" | 17 | 3/8 | Green | 1 5/8" | 1 3/16" | 1 11/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 3/4" | 19 | 3/8 | Green | 1 15/16" | 1 3/16" | 1 13/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 13/16" | 21 | 1/2 | Green | 1 15/16" | 1 3/16" | 1 13/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 7/8" | 22 | 1/2 | Green | 1 15/16" | 1 3/16" | 1 13/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 1" | 25 | __ | Green | 1 15/16" | 1 3/16" | 1 13/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 1 1/16" | 27 | 3/4 | Green | 2 3/8" | 1 3/16" | 2 1/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 1 1/4" | 32 | __ | Green | 2 13/16" | 1 3/16" | 2 11/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 1 5/16" | 33 | 1 | Green | 2 13/16" | 1 3/16" | 2 11/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 1 1/2" | 38 | __ | Green | 2 13/16" | 1 3/16" | 2 11/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 1 11/16" | 43 | 1 1/4 | Green | 2 13/16" | 1 3/16" | 2 11/16" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 1 3/4" | 44 | 1 1/4 | Green | 3 7/16" | 1 3/16" | 3" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 1 7/8" | 48 | 1 1/2 | Green | 3 7/16" | 1 3/16" | 3" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
| 2" | 51 | 1 1/2 | Green | 3 7/16" | 1 3/16" | 3" | 2,000 | -20° to 190° | Yes | Yes | DIN 3015-1 | 0000000 | 00000 |
Pipe Cradles for Loop Hangers
Also known as pipe shields, these cradles provide additional support and prevent insulation from tearing when routing insulated pipe through loop hangers.
Adhesive-mount cradles have an adhesive strip that attaches the cradle to the pipe’s insulation.
ID | ||||||||
|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | Lg. | Wd. | Ht. | Thick. | Temp. Range, °F | Each | |
Galvanized Steel | ||||||||
Adhesive Mount | ||||||||
| 1 7/8" | 48 | 12" | 2" | 1" | 1/32" | -150° to 500° | 0000000 | 00000 |
| 2 3/8" | 60 | 12" | 2 1/2" | 1 1/4" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 2 7/8" | 73 | 12" | 3" | 1 1/2" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 3 1/2" | 89 | 12" | 3 1/2" | 1 3/4" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 4" | 102 | 12" | 4" | 2" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 4 1/2" | 114 | 12" | 4 1/2" | 2 1/4" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 5" | 127 | 12" | 5" | 2 1/2" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 5 9/16" | 141 | 12" | 5 1/2" | 2 3/4" | 1/32" | -150° to 500° | 0000000 | 0000 |
| 6 1/8" | 156 | 12" | 6" | 3" | 1/16" | -150° to 500° | 0000000 | 0000 |
Cable Holders
Mount to a surface to secure and route cable.
Adhesive-back cable holders mount to any clean, dry surface. Screw-in mount cable holders require a fastener.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Max. Bundle Dia. | Lg. | Wd. | Ht. | For Use Outdoors | Specifications Met | Temp. Range, °F | Color | Pkg. Qty. | Pkg. | |
Nylon Plastic | |||||||||||
| A | 3/8" | 1" | 3/4" | 7/8" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 00000 |
| A | 9/16" | 1 7/16" | 3/4" | 1 1/4" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 00000 |
| A | 3/4" | 1 11/16" | 1" | 1 5/16" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 00000 |
| A | 15/16" | 1 3/4" | 1" | 1 5/8" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 00000 |
| B | 1/4" | 1/2" | 1/2" | 9/16" | No | UL 94 V-2 | -40° to 180° | Off-White | 25 | 0000000 | 0000 |
| B | 1/4" | 5/8" | 3/8" | 3/4" | No | UL 94 V-2 | -40° to 180° | Off-White | 25 | 00000000 | 0000 |
| B | 1/4" | 1" | 1/2" | 1/2" | No | UL 94 V-2 | 32° to 185° | Off-White | 25 | 0000000 | 0000 |
| B | 3/8" | 3/4" | 1/2" | 3/4" | No | UL 94 V-2 | -40° to 180° | Off-White | 25 | 00000000 | 00000 |
| C | 3/8" | 1" | 1/2" | 1 1/8" | No | UL 94 V-2 | 32° to 185° | Off-White | 25 | 00000000 | 0000 |
| C | 1/2" | 1" | 1/2" | 1 1/4" | No | UL 94 V-2 | 32° to 185° | Off-White | 25 | 00000000 | 0000 |
| C | 3/4" | 1" | 1/2" | 1 5/8" | No | UL 94 V-2 | 32° to 185° | Off-White | 25 | 00000000 | 0000 |
| D | 7/16" | 1" | 1/2" | 1 1/4" | No | UL 94 V-2 | 32° to 185° | Off-White | 50 | 00000000 | 00000 |
| D | 9/16" | 7/8" | 1/2" | 1 7/16" | No | UL 94 V-2 | 32° to 185° | Off-White | 50 | 00000000 | 00000 |
| E | 1/4" | 1" | 5/8" | 9/16" | No | UL 94 V-2 | -40° to 185° | Off-White | 25 | 0000000 | 0000 |
| K | 1/8" | 1 1/2" | 3/4" | 11/16" | No | UL 94 V-2 | -40° to 185° | Gray | 5 | 00000000 | 00000 |
| K | 1/8" | 2 1/2" | 3/4" | 11/16" | No | UL 94 V-2 | -40° to 185° | Gray | 5 | 00000000 | 00000 |
| L | 1/4" | 2 1/4" | 1" | 1/2" | No | UL 94 V-2 | -20° to 120° | Gray | 1 | 00000000 | 0000 |
| L | 1/4" | 3 3/8" | 1" | 5/8" | No | UL 94 V-2 | -20° to 120° | Gray | 1 | 00000000 | 0000 |
PVC Plastic | |||||||||||
| F | 3/8" | 1 1/16" | 1" | 7/16" | No | UL 94 V-0 | 32° to 120° | Gray | 100 | 00000000 | 00000 |
| G | 3/4" | 1 1/8" | 1" | 9/16" | No | UL 94 V-0 | 32° to 120° | Gray | 10 | 0000000 | 0000 |
| G | 1" | 1 1/2" | 1 1/4" | 13/16" | No | UL 94 V-0 | 32° to 120° | Gray | 10 | 0000000 | 00000 |
Vinyl Plastic | |||||||||||
| G | 1/4" | 1/2" | 1/2" | 7/16" | No | UL 94 V-0 | 32° to 120° | Gray | 25 | 0000000 | 0000 |
| G | 1/2" | 3/4" | 3/4" | 1/2" | No | UL 94 V-0 | 32° to 120° | Gray | 25 | 0000000 | 0000 |
| H | 1/8" | 3/4" | 3/4" | 5/16" | No | UL 94 V-0 | 32° to 120° | Gray | 25 | 0000000 | 00000 |
| H | 1/4" | 3/4" | 3/4" | 1/2" | No | UL 94 V-0 | 32° to 120° | Gray | 25 | 0000000 | 00000 |
| H | 3/8" | 3/4" | 3/4" | 5/8" | No | UL 94 V-0 | 32° to 120° | Gray | 25 | 0000000 | 00000 |
| H | 1/2" | 1" | 1" | 5/8" | No | UL 94 V-0 | 32° to 120° | Gray | 10 | 0000000 | 0000 |
Zinc-Plated Steel | |||||||||||
| J | 1/4" | 9/16" | 3/4" | 3/8" | No | __ | -20° to 120° | __ | 5 | 0000000 | 0000 |
| J | 5/8" | 3/4" | 1 3/16" | 13/16" | No | __ | -20° to 120° | __ | 5 | 0000000 | 0000 |
Mountable Cable Ties
Adhesive-back mount ties stick to any clean, smooth surface and have mounting holes for screws.
Wide and extra wide ties are stronger but less flexible than our narrow and standard cable ties. Use them for heavy duty applications that require extra strength.
Adhesive-Back Hook and Loop Cable Ties
Stick these ties to any smooth, clean surface.
Style A wraps around material and attaches to itself. Style B presses closed over a bundle.
| Style | Lg. | For Max. Bundle Dia. | Wd. | Thick. | For Use Outdoors | Temp. Range, °F | Choose a Color | Each | |
Nylon Fabric | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | 6" | 1 1/4" | 7/8" | 0.06" | No | 40° to 110° | Black | 0000000 | 00000 |
| B | 2" | 3/4" | 5/8" | 0.12" | No | -20° to 200° | 0000000 | 0000 | |
| B | 2" | 3/4" | 1" | 0.12" | No | -20° to 200° | 0000000 | 0000 | |
| B | 4" | 1 1/2" | 5/8" | 0.12" | No | -20° to 200° | 0000000 | 0000 | |
| B | 4" | 1 1/2" | 1" | 0.12" | No | -20° to 200° | 0000000 | 0000 | |
| B | 8" | 3 1/4" | 1" | 0.12" | No | -20° to 200° | 0000000 | 0000 | |
| B | 12" | 4 1/2" | 1" | 0.12" | No | -20° to 200° | 0000000 | 0000 | |
Hook and Loop Cable Tie Mounts
Add a hook and loop cable tie to these mounts to secure a bundle.
Reusable Adhesive-Back Holders
Adhesive strips let you remove and reuse these holders without damaging the wall.
Style A have a spring clip to hold items.
Style B grip round items, such as handles.
Reusable Adhesive-Back Hooks
Adhesive strips hold tight yet remove cleanly without damaging the wall.
Style A mount to the ceiling to suspend lightweight items. The hook rotates for easy positioning.
Adhesive-Back DIN Rails
Stick this DIN rail in any enclosure to mount components without making screw holes that might leak. The adhesive backing and short length let you install these in tight spaces where a screwdriver wouldn’t fit. Adhesive reaches full capacity after 24 hours.
DIN rails meet UL 94 V-0, so if they catch fire, they’ll self-extinguish within 10 seconds and won’t spread the fire by dripping.
For technical drawings and 3-D models, click on a part number.