Closure Caps | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

5,620 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

Expandable Tapered Plugs

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters.

Hollow Tapered Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Hollow Tapered Plug Assortments

Keep hollow tapered plugs of various sizes on hand to solve whatever problems arise. The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Pull-Ring Tapered Plugs

Pull the two built-in rings to quickly remove these plugs. All are tapered to fit a range of hole diameters.

Tapered Plugs

Often used as laboratory stoppers, these rubber plugs have good impact and abrasion resistance. They’re tapered to fit a range of hole diameters.

Corks

Lightweight and moisture resistant, these plugs are laboratory-grade 100% natural cork. They’re tapered to fit a range of hole diameters.

Miniature Tapered Plugs

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. Their tapered design fits a range of hole diameters.

Tamper-Evident Tapered Plugs

Often used on gas cylinders, these plugs cinch and lock tightly around valve heads to block the ports—they must be cut off making it clear if the cylinder has been tampered with. The plugs are tapered to fit a range of hole diameters.

High-Temperature Tapered Plugs

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 570° F. All are tapered to fit a range of hole diameters.

Expandable High-Temperature Tapered Plugs

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters. Good for paint baking and powder-coating applications, these plugs withstand temperatures up to 450° F.

Miniature High-Temperature Tapered Plugs

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. They withstand temperatures up to 470° F, which makes them good for electroplating, paint baking, and powder-coating applications. All are tapered to fit a range of hole diameters.

Hollow High-Temperature Tapered Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters. Good for electroplating, paint baking, and powder-coating applications, they withstand temperatures up to 450° F.

Chemical-Resistant Tapered Plugs

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Their tapered design fits a range of hole diameters.

Food Industry Tapered Plugs

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

Round Plugs

Threaded Round Plugs for Straight-Thread Pipe

Seal tube and hose fittings to keep their straight threads protected from contaminants during fabrication and storage.

Threaded Round Plugs for NPT Pipe

Protect internally threaded NPT connections from contaminants during fabrication and storage.

High-Temperature Round Plugs for NPT Pipe

These plugs withstand temperatures up to 600° F to protect internally threaded NPT connections from contaminants during electropainting, paint baking, and powder coating applications.

Threaded Round Plugs for BSPT Pipe

Safeguard internally threaded BSPT connections from contaminants during fabrication and storage.

Threaded Round Plugs for 37° Flared Tube

Designed to fit into 37° flared connections such as those found on JIC and SAE fittings, these plugs protect internally threaded connections from contaminants during fabrication and storage.

Sealing Plugs

With a compressible flanged top, these plugs are designed to seal the ends of copper tubing often used in water supply lines, refrigerant lines, and HVAC compressors. All are sized to fit standard copper tube dimensions.

Round Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes.

Antistatic Round Plugs

Keep equipment safe from electrical currents with these plugs that have a surface resistivity of less than 10¹² ohms.

Conductive Round Plugs

With a surface resistivity of less than 10⁵ ohms, these plugs not only dissipate electrical charges, but can be used as an electrical shield.

Snap-In Round Plugs

Flexible ridges or straps hold these plugs in place and allow them to fit a range of hole diameters.

Flanged Pull-Through Round Plugs

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

Pull-Tab Round Plugs

A time-saving alternative to threaded plugs, these plugs press in place and have an ergonomic pull tab for quick and easy removal. Use them to temporarily protect holes in objects from contaminants during storage, painting, and light fabrication.

Chemical-Resistant Pull-Through Round Plugs

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

High-Temperature Pull-Through Round Plugs

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 600° F. To form a tight seal, use the smaller end of the plug to pull the larger end into a through hole.

Miniature Pull-Through Round Plugs

Also known as mouse tails, these tiny plugs fit through-hole IDs as small as 0.022”, 0.025", or 0.03”.

Rectangular Plugs

Snap-In Rectangular Plugs

Flexible ridges securely hold these plugs in place and allow them to fit a range of hole sizes.

Push-In Rectangular Plugs

Push these plugs into an opening and friction holds them in place.

Square Plugs

Snap-In Square Plugs

Flexible ridges or straps hold these plugs in place.

Push-In Square Plugs

Push these plugs into an opening and friction holds them in place.

Metal Square Plugs

More durable than plastic plugs, these provide the most protection from abrasion and impact. Use them to eliminate sharp edges and create a finished look on metal fence and machine-guard posts. Drive them in place with a hammer for a secure fit.

Domed Square Plugs

Often used on metal furniture, these plugs provide a finished look on posts and tubes. Snap them into place and their flexible ridges will provide a secure grip.

Panel Plugs

Plastic Snap-In Panel Plugs

Tapered prongs or a snap-in ring securely hold these plugs in place.

Metal Snap-In Panel Plugs

Made of steel, these are our most durable plugs for panels. Tapered prongs snap into the hole to securely hold them in place.

Metal Snap-In Panel Plug Assortments

Keep metal snap-in plugs of various sizes on hand to solve whatever problems arise. Made of steel, these plugs are our most durable plugs for panels. Their tapered prongs snap into holes to securely hold them in place.

Vented Snap-In Panel Plugs

Vents in the top allow air circulation and permit heat and fumes to escape. These plugs have tapered prongs that snap into the hole to securely hold them in place.

Locking Panel Plugs

The wings on these plugs expand against the sides of a hole to lock them in place.

Vented Locking Panel Plugs

Vents in the top allow air circulation and permit heat and fumes to escape. All of these plugs have wings that expand against the sides of the hole to lock them in place.

Clear Locking Panel Plugs

These plugs are see-through to provide visibility and light transmission. They have wings that expand against the sides of the hole to lock them in place.

Push-In Panel Plugs

Push these plugs into place for a finished appearance on both sides of a panel.

Sealing Panel Plugs

The wings on these plugs expand against the sides of a hole to form a liquid-tight seal. Pierce the plugs with round wire, cable, or tubing and they function as a grommet to create insulated holes.

Fixture Plate Chip Plugs

Keep chips and shavings from clogging or damaging unused holes on fixture plates in milling machines.

Expansion Plugs for Castings

Also known as freeze plugs, these are commonly used to permanently seal the shallow holes left in a component during the casting process.

Hydraulic Sealing Plugs

Permanently seal unthreaded holes in pneumatic and hydraulic components.

Ethernet Port Plugs

Shield unused RJ45 type ports on computers and other electronic equipment from debris and moisture.

Caps

High-Temperature Round Caps

Good for electroplating, paint baking, and powder-coating applications, these caps withstand temperatures up to 440° F or 570° F.

Heavy Duty Round Caps

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

Metal Round Caps

More durable than plastic caps, these provide the most protection from abrasion and impact.

Round Caps

Slide these flexible vinyl caps on and they conform for a snug fit.

Domed Round Caps

The large domed head extends beyond the diameter of your pipe, rod, or tubing for added protection.

Hanging Round Caps

Slide these caps over a tool handle or other round object and use the eye to hang it.

Tethered Round Caps

The tethered design allows frequent access to the ends of pipe, tubing, and other round objects without ever misplacing the cap.

Sure-Grip Round Caps

A long, textured pull tab provides a sure grip for quick removal even when wearing gloves.

Roll-Resistant Round Caps

Commonly used on shipping tubes, these caps have a square head to prevent round objects from rolling during shipping and storage.

Chemical-Resistant Round Caps

These caps have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing.

Food Industry Round Caps

Made of FDA listed materials, these caps are suitable for food contact.

Antistatic Round Caps

Keep equipment safe from electrical currents with these caps that have a surface resistivity of less than 10¹² ohms.

Conductive Round Caps

With a surface resistivity of less than 10⁵ ohms, these caps not only dissipate electrical charges, but can be used as an electrical shield.

Tapered Cap Assortments

Keep tapered caps of various sizes on hand to solve whatever problems arise. These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Square Caps

Slide these flexible vinyl caps on and they conform for a snug fit.

Rectangular Caps

Slide these flexible vinyl caps onto rectangular objects and they conform for a snug fit.

High-Temperature Tapered Caps

Made of silicone, these caps withstand temperatures of 450° F for electroplating, paint-baking, and powder-coating applications. All of these flexible caps are tapered to fit a variety of unthreaded and threaded objects.

Heavy Duty Angle Caps

Made of rigid plastic, these caps provide more wear resistance to the ends of angle iron than vinyl caps but are not as flexible.

Heavy Duty Square Caps

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

Tapered Caps

These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Angle Caps

Place these flexible vinyl caps over the ends of your angle iron and they conform for a snug fit.

Corner Caps

Guard the corners of fragile materials such as glass and mirrors.

Flexible Pull-Tab Caps

Slide these flexible vinyl caps on and they conform for a snug fit. Pull the tab for easy removal.

Squeeze Top Caps

Squeeze the dome top to remove these caps. They're commonly used as thread protectors.

Threaded Caps

Protect externally threaded components from contaminants during fabrication and storage.

Stretchable Elastic Caps

Similar to a shower cap, these caps have an elastic band that allows them to stretch and cover a variety of shapes in a range of sizes.

Tear-Tab Caps

Push these caps onto pipe and fittings, then tear their tab to break the seal for easy removal.

High-Visibility Pull-Tab Caps

A vibrant yellow color makes these caps stand out. They are made of flexible rubber that conforms for a snug fit. Pull the tab for easy removal.

Propane Tank Tear-Tab Caps

Designed for propane tanks such as those on forklifts and grills, these caps protect tank valves during storage and transit. Push the caps onto the valves, then tear their tab to break the seal for easy removal.

Stretchable Sealing Caps

Tug on the pull tabs to stretch these caps onto the tips of bottles, beakers, flasks, and cylinders, creating an airtight seal.

Heat-Shrink Round Caps

Permanently seal pipe, tubing, conduit, and even crimped electrical connections. Slide these flexible caps on and use a heat gun to tightly shrink them to the shape of whatever they are covering. Their outer surface shrinks while the inner wall flows into voids to create a sealed connection.

Fastener Caps

Hinged Fastener Caps

A one-piece hinged design allows frequent access to screw heads without misplacing the top. To conceal and protect the entire screw head, insert your screw through the hole in the base and flip the hinged top over.

Screw Caps

Conceal and protect the tops of socket head or button head screws.

Snap-On Fastener Caps

To conceal and protect the entire screw head, insert your screw through the hole in the base and snap on the top.

Threaded Standoff Caps

Give open-ended standoffs a finished look and protect them from dirt and debris.

Hex Nut Caps

Sized to fit hex nuts, these caps snap on for a tight hold and provide protection from corrosion.

USB Caps

Shield USB connectors from damage, contaminants, and moisture when they are not being used.

Bearing Caps

Cover standard or flange-mount bearings to protect personnel from injury and keep contaminants out.

Flange Caps

SAE Flange Caps

Protect SAE hydraulic flanges during shipping, storing, and finishing applications.

Flange Caps

Snap these caps into flange bolt holes to safeguard pipe flanges during shipping, storing, and finishing applications. They all have a thick center pad to protect the flange opening and pipe threads from damage.

Adhesive-Back Flange Caps

Stick these caps on the raised surfaces of flanges or other flat surfaces for extra protection during transport and storage.

Stretchable Flange Caps

Stretch these caps over flared edges such as flanged tubing and valve handles.

Rebar Caps

Keep personnel safe from protruding rebar and pipe. Made of rigid plastic, these durable safety caps are bright orange or yellow for excellent visibility.

Capacitor Caps

Also known as capacitor boots, these caps protect capacitors and wire connections from damage to extend their service life. They also insulate wire terminal connections to help reduce accidental shocks.

Stacking Caps and Targets

Weld these caps and targets to the ends of posts to create stackable shelving and racking systems.

DIN Rail Caps

Guard the edges of DIN rail from damage and create a finished look.

Connectors

Caps for Mini Connectors

Protect mini connectors when not in use.

Thread Adapters for Mini Connectors

Join two connectors that both have internal threads.

Caps for Harsh Environment Mini Connectors

Protect harsh environment mini connectors when not in use.

Thread Adapters for Harsh
Environment Mini Connectors

Join two connectors that both have internal threads.

Caps for Micro M12 Screw-Together Connectors

Protect screw-together M12 connectors when not in use.

Caps for Harsh Environment Micro
M12 Screw-Together Connectors

Protect harsh environment M12 connectors when not in use.

Caps for Mil. Spec. Screw-Together Connectors

Protect Mil. Spec. connectors when not in use.

Screw-Together Wet-Location
HDMI Connectors and Cords

Audio/video HDMI connectors and cords are rated IP67 when mated.

Ethernet Port Security Clips

Lock Ethernet cords in place to prevent unauthorized removal from ports.

Caps for Outlets and Plugs

Cover unused electrical outlets or plug prongs to protect them from dust, dirt, liquids, and other contaminants.

Stainless Steel Pipe and Pipe Fittings

Low-Pressure Stainless Steel Threaded Pipe Fittings

Use these corrosion-resistant fittings in a low-pressure pipe line.

Premium Low-Pressure Stainless Steel
Threaded Pipe Fittings with Certification

Unlike other stainless steel fittings, these are made in the U.S.A. for superior quality. As another marker of quality, they come with a certificate with a traceable lot number and test report that guarantees material composition.

Low-Pressure Stainless Steel
Threaded Pipe Fittings with Sealant

The male threads on these fittings have a sealant applied for extra leak protection.

Extreme-Pressure Stainless
Steel Threaded Pipe Fittings

Use these fittings in extreme-pressure conditions up to 15,000 psi.

Medium-Pressure Stainless
Steel Threaded Pipe Fittings

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

High-Pressure Stainless Steel Threaded Pipe Fittings

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

Precision Extreme-Pressure Stainless
Steel Threaded Pipe Fittings

These fittings are made to tighter tolerances than other stainless steel pipe fittings. They are also known as instrumentation fittings.

Standard-Wall Butt-Weld Stainless
Steel Unthreaded Pipe Fittings

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

High-Pressure Stainless Steel
Unthreaded SAE Pipe Flanges

Also known as Code 61 SAE hydraulic flanges.

Thick-Wall Butt-Weld Stainless
Steel Unthreaded Pipe Fittings

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Low-Pressure Press-Connect Stainless
Steel Unthreaded Pipe Fittings

Press these fittings onto stainless steel pipe using a crimping tool for a permanent, leak-tight connection that's faster than threading or welding and doesn't require heat.

Low-Pressure Stainless Steel Unthreaded Pipe Flanges

Bolt two same-size flanges together with a gasket to create an access point within a pipe line.

Extreme-Pressure Socket-Connect
Stainless Steel Unthreaded Pipe Fittings

The strongest socket-connect fittings we offer, these heavy duty forged fittings are also known as Pressure Class 6000.

High-Pressure Stainless Steel Unthreaded Pipe Flanges

Use these heavy duty forged flanges for high-pressure applications.

High-Pressure Socket-Connect
Stainless Steel Unthreaded Pipe Fittings

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Thin-Wall Butt-Weld Stainless
Steel Unthreaded Pipe Fittings

Also known as Schedule 10 fittings, these are thin, lightweight, and corrosion resistant.

Aluminum Pipe and Pipe Fittings

Low-Pressure Aluminum Threaded Pipe Fittings

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Medium-Pressure Aluminum Threaded Pipe Fittings

Designed for medium-pressure applications, these fittings have better strength than our low-pressure aluminum pipe fittings.

High-Pressure Aluminum Threaded Pipe Fittings

Also known as Pressure Class 3000 fittings, these have the highest pressure rating of all the aluminum pipe fittings we offer.

Standard-Wall Butt-Weld Aluminum
Unthreaded Pipe Fittings

Also known as Schedule 40 fittings, these have thicker walls than our thin-wall aluminum unthreaded pipe fittings.

Aluminum Unthreaded Pipe Flanges

Use these unthreaded flanges in low-pressure applications. Also known as Pressure Class 125 flanges.

Iron and Steel Threaded Pipe and Pipe Fittings

Compact Precision Extreme-Pressure
Steel Threaded Pipe Fittings

Made to tighter tolerances than other steel pipe fittings, these are also known as instrumentation fittings.

Compact Extreme-Pressure
Steel Threaded Pipe Fittings

These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces.

Extreme-Pressure Steel Threaded Pipe Fittings

The strongest steel fittings we offer, these can withstand extreme-pressure applications.

Low-Pressure Galvanized Steel
Threaded Pipe Fittings with Sealant

The male threads on these fittings have a sealant applied for extra leak protection.

High-Pressure Galvanized Steel Threaded Pipe Fittings

A galvanized finish gives these fittings better corrosion resistance than our plain steel high-pressure fittings. Also known as Pressure Class 3000 fittings.

Medium-Pressure Iron and Steel Threaded Pipe Fittings

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

Low-Pressure Galvanized Iron
and Steel Threaded Pipe Fittings

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

High-Pressure Iron and Steel Threaded Pipe Fittings

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

Low-Pressure Iron and Steel Threaded Pipe Fittings

Use these fittings for low-pressure applications in noncorrosive environments.

Medium-Pressure Galvanized Iron
and Steel Threaded Pipe Fittings

A galvanized finish gives these fittings fair corrosion resistance. They have the strength to handle medium-pressure applications.

Low-Pressure Cast Iron Threaded Pipe Fittings

Grooved-End Iron Pipe Fittings

The grooved ends on these iron fittings connect to pipe with a clamp to easily install piping systems.

Iron and Steel Unthreaded Pipe and Pipe Fittings

High-Pressure Steel Unthreaded SAE Pipe Flanges

Also known as Code 61 SAE hydraulic flanges.

High-Pressure Steel Unthreaded Pipe Flanges

Forged for extra strength, these heavy duty unthreaded flanges can withstand high-pressure applications.

Low-Pressure Steel Unthreaded Pipe Flanges

Bolt two flanges of the same size together with a gasket to create an access point in a pipe line.

Extreme-Pressure Socket-Connect
Steel Unthreaded Pipe Fittings

Also known as Pressure Class 6000 fittings, these heavy duty forged fittings are the strongest steel fittings we offer.

Thick-Wall Butt-Weld Steel Unthreaded Pipe Fittings

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

High-Pressure Socket-Connect
Steel Unthreaded Pipe Fittings

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slide the pipe into the socket and weld.

Low-Pressure Press-Connect
Steel Unthreaded Pipe Fittings

Crimp these fittings onto steel pipe to form a tightly sealed connection that’s faster than threading or welding and doesn’t require heat.

Standard-Wall Butt-Weld Steel Unthreaded Pipe Fittings

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Extreme-Pressure Steel Unthreaded Pipe Flanges

For excellent strength in extreme-pressure applications, choose these heavy duty Pressure Class 1500 flanges.

Brass and Bronze Pipe and Pipe Fittings

Bronze Unthreaded Pipe Fittings

Also known as Silbraze fittings.

Low-Pressure Brass and Bronze Threaded Pipe Fittings

Use these fittings in low-pressure flow applications. They have good corrosion resistance.

Precision Extreme-Pressure
Brass Threaded Pipe Fittings

Also known as instrumentation fittings, these have the most precise threads and the tightest tolerances of all the brass pipe fittings we offer.

Medium-Pressure Brass and
Bronze Threaded Pipe Fittings

Choose these fittings when you need better strength than our low-pressure brass and bronze pipe fittings.

High-Pressure Plated Brass Threaded Pipe Fittings

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

High-Pressure Brass Threaded
Pipe Fittings for Drinking Water

Use these heavy-duty brass fittings for high-pressure drinking water applications.

Brass and Bronze Unthreaded Pipe Flanges

Bolt these flanges to another same-size flange with a gasket to create an access point within a pipe line. They are also known as Silbraze flanges.

High-Pressure Brass Threaded Pipe Fittings

These brass fittings have the strength to handle high-pressure applications.

Low-Pressure Brass Threaded
Pipe Fittings with Sealant

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Pressure Class 125 fittings, they are built for use in low-pressure applications.

High-Pressure Brass Threaded
Pipe Fittings with Sealant

Not only do these brass fittings have the strength to handle high-pressure applications, the male threads have a sealant applied for extra protection against leaks.

Miniature Low-Pressure Brass Threaded Pipe Fittings

Less than an inch in length, these miniature fittings work well in low-pressure pipe lines that are tight on space.

Low-Pressure Plated Brass Threaded Pipe Fittings

Used in low-pressure pipe lines, these brass fittings have a plating that makes them shiny and improves corrosion resistance.

Medium-Pressure Plated Brass Threaded Pipe Fittings

Plated with nickel, these brass fittings resist rust better than steel and unfinished brass fittings. Select them when you need more strength in corrosive environments to handle higher pressures than our low-pressure fittings.

Extreme-Pressure Brass Threaded Pipe Fittings

Extreme pressures are no problem for these heavy-duty brass fittings.

Titanium Threaded Pipe Fittings

Titanium has similar strength to steel, but is approximately 40% lighter. It has better corrosion resistance than most stainless steel alloys and can handle corrosive substances, such as salt water and acids.

Plastic Pipe and Pipe Fittings

Aboveground Standard-Wall PVC Pipe
Fittings for Drain, Waste, and Vent

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

Underground Snap-Lock Polyethylene
Pipe Fittings for Drain, Waste, and Vent

The snap-together design allows you to quickly connect these fittings to pipe with no cement required. Fittings are typically used in gravity-flow drainage applications.

Underground PVC Pipe Fittings
for Drain, Waste, and Vent

With thinner walls than Schedule 40 fittings, these are lighter in weight and have more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. They are also known as SDR 35 fittings.

Crack-Resistant PFA Pipe Fittings for Chemicals

Not only do these PFA fittings have the chemical resistance to handle acid and salt water, they also have better crack resistance than other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Drain, Waste, and Vent ABS Pipe Fittings for Chemicals

These fittings are an economical option for chemical waste systems. Fittings are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

Plastic Pipe Fittings for Oil

Made of corrosion-resistant plastic, these fittings won’t deteriorate when used in oil applications. They have high strength and impact resistance.

High-Pressure Barbed Plastic Pipe Fittings for Water

Use for pressures up to 200 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Thick-Wall Plastic Pipe Flanges for Water

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

Plastic Pipe Fittings for Gasoline

Use these plastic fittings to connect gasoline fuel lines to machines and equipment. They have excellent corrosion resistance as well as high strength and impact resistance.

Easy-Access UV-Resistant Polypropylene
Pipe Fittings for Chemicals

Also known as manifold flange fittings, these have a clamp-together design that lets you access your line for routine maintenance. Fittings resist acids, solvents, and other harsh chemicals. They won’t deteriorate when exposed to the damaging effects of ultraviolet light, so they’re suitable for outdoor use.

High-Temperature PTFE Pipe Fittings for Chemicals

Extreme temperatures are no problem for these fittings—they’re made of PTFE, so they can withstand a wider temperature range than any of our other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Plastic Pipe Fitting Plugs for Food and Beverage

Plugs are are suitable for food and beverage applications and won't impart tastes or odors to your product.

CPVC Pipe Fittings for Hot Water

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications up to 200° F.

UV-Resistant Polypropylene Pipe Fittings for Chemicals

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

CPVC Pipe Flanges for Hot Water

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. Use in high-temperature plumbing and water supply applications up to 200° F.

Fiberglass Pipe Flanges for Corrosive Chemicals

Flanges have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. They are reinforced with fiberglass layers for better strength and durability than any of our other pipe flanges for chemicals. Bolt two same-size flanges together with a gasket to create an access point within a line.

UV-Resistant Polypropylene Pipe Flanges for Chemicals

Use these polypropylene flanges in outdoor environments—they resist the damaging effects of ultraviolet light. They have the chemical resistance to stand up to acids, solvents, and other harsh substances. Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are also known as Pressure Class 150 flanges.

Standard-Wall Plastic Pipe Fittings for Water

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Thick-Wall Plastic Pipe Fittings for Water

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Low-Pressure Clamp-On Connectors for Drain, Waste, and Vent

Low-Pressure Clamp-On Connectors
for Drain, Waste, and Vent

Tube Fittings for Plastic and Rubber Tubing

Plastic Push-to-Connect Tube Fittings for Chemicals

Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push, and an internal gripping ring and fluoroelastomer O-ring hold the tubing tight.

Push-to-Connect Tube Fittings for Air

Stainless Steel Quick-Turn Tube Couplings for Air

Made of stainless steel, these couplings stand up to wet environments.

Plastic Quick-Turn Tube Couplings for Air and Water

Made of plastic, these couplings are lighter in weight than metal quick-turn couplings.

Compression Fittings for Plastic Tubing—Chemicals

Fittings have a sleeve that bites into tubing as you tighten the nut to form a seal in applications up to 120 psi. Also known as flareless fittings.

Brass Quick-Turn Tube Couplings for Air

These brass couplings have good corrosion resistance.

Socket-Connect Fittings for
Plastic Tubing—Drinking Water

Use these nuts with brass compression fittings to create a seal on plastic tubing. They meet NSF/ANSI 61 for use with drinking water.

Push-to-Connect Tube Fittings for Drinking Water

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Quick-Clamp Fittings for Dairy

Tube Fittings for Stainless Steel Tubing

Quick-Connect High-Vacuum
Fittings for Stainless Steel Tubing

Twist these fittings onto high-vacuum tubing to quickly make sealed, high-vacuum connections without the need for clamping, welding, or tools.

Ultra-High-Vacuum Flanges and
Fittings for Stainless Steel Tubing

Create access points in ultra-high-vacuum lines or chambers by bolting two same-size flanges together with a copper gasket between them. The flanges’ sharp edges dig into the copper gasket and form an extremely tight seal, which means they handle higher vacuum pressures than other high-vacuum fittings with rubber gaskets.

Extra-Support High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Also known as I-line fittings, these quick-clamp fittings permit easy access to your line.

Bolt-Together High-Vacuum
Fittings for Stainless Steel Tubing

For high-vacuum systems with tube sizes too large for quick-clamp (KF) fittings, choose these bolt-together fittings.

Precision AN 37° Flared Fittings
for Stainless Steel Tubing

The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings.

Precision Compression Fittings
for Stainless Steel Tubing

Ultra-High-Polish Gasket Fittings
for Stainless Steel Tubing

Polished to a 15 Ra and under finish, these fittings have a mirror smooth interior. They are also known as ultra-high-purity fittings.

37° Flared Fittings for Stainless Steel Tubing

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°.

Yor-Lok Fittings for Stainless Steel Tubing

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

High-Polish Metal Quick-Clamp Sanitary Tube Fittings

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Extra-High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Polished to a 20 Ra finish, these fittings have an extra-smooth interior that prevents product buildup and inhibits bacteria growth.

High-Polish Gasket Fittings for Stainless Steel Tubing

Fittings are polished to a32 Ra and under finish on the interior.

Claw-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

An alternative to bolt-together fittings, these handle larger tube OD sizes and have higher vacuum ratings than quick-clamp fittings. Also known as ISO-K high-vacuum fittings, the clamps have claws that grab hold of fittings with flanged ends.

Quick-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

Compression Fittings for Stainless Steel Tubing

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.

Plastic Quick-Clamp Sanitary
Fittings for Stainless Steel Tubing

Butt-Weld Fittings for Stainless Steel Tubing

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Tube Fittings for Copper and Brass Tubing

Solder-Connect Fittings for Copper Tubing

Solder these fittings to tubing for a permanent, leak-tight connection. They are also known as sweat fittings.

Brass Push-to-Connect Fittings for Copper Tubing

Choose these metal fittings when you need better durability than our plastic push-to-connect fittings.

45° Flared Fittings for Copper and Brass Tubing

No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They are also known as refrigeration and SAE fittings.

Yor-Lok Fittings for Copper Tubing

Precision Compression Fittings for Copper Tubing

Also known as instrumentation fittings, these are made to tighter tolerances than standard compression fittings. They are compatible with Parker CPI fittings.

Tube Fittings for Steel Tubing

Compression Fittings for Steel Tubing

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.

Yor-Lok Fittings for Steel Tubing

These fittings have two sleeves for extra gripping power. They bite into steel tubing as you tighten the nut to form a strong seal.

37° Flared Fittings for Steel Tubing

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

Hose Fittings

Metal Garden Hose Fittings

Attach these fittings to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Plastic Garden Hose Fittings

Made of nylon, these fittings are lighter in weight than metal garden hose fittings. Attach them to garden hose for a variety of water supply applications.

Threaded Hose Fittings for Compressed Gas

Use these CGA fittings to connect welding hose to pressure regulators and torches.

Pin-Lug Fire Hydrant Caps

These caps are the fastest way to close off or access your water line. They have a bracket that snaps into any type of 2 1/2 size female fire hose threads. Tap on one of the pin lugs to remove quickly in an emergency.

Metal Cam-and-Groove Hose Couplings for Water

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

Metal Cam-and-Groove Hose
Couplings for Chemicals and Petroleum

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Threaded Hose Fittings for Hydraulic Fluid

Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system. Use in high-pressure applications up to 6,000 psi

Dust Caps and Plugs for Snap-Tite H-Shape
Quick-Disconnect Hose Couplings for Hydraulic Fluid

Use these dust caps and plugs to keep contaminants out of your hose line.

Cam-and-Groove Hose Couplings
for Food and Beverage

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Twist-Claw Hose Couplings for Air and Water

Couplings have an identical claw-style head that connects to another twist-claw hose coupling with a quarter twist.

Dust Caps and Plugs for Pioneer Quick-Disconnect
Hose Couplings for Hydraulic Fluid

Use these dust caps and plugs to keep contaminants out of your hose line.

Pioneer Quick-Disconnect Hose
Couplings for Hydraulic Fluid

Use these couplings at pressures up to 3,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Pioneer-shape plugs and sockets.

Protective Plastic Plugs for
Cam-and-Groove Hose Sockets for Water

Insert these caps into a cam-and-groove socket to protect the end of the coupling from damage. The attached handle allows you to easily maneuver hose.

Dust Caps and Plugs for International Standard
ISO Minimal-Spill Quick-Disconnect
Hose Couplings for Hydraulic Fluid

Use these dust caps and plugs to keep contaminants out of your hose line.

Rocker-Lug Fire Hydrant Caps and Plugs

Thread these caps and plugs onto fire hydrants and washdown equipment to close off the line. They have rocker lugs for easy gripping.

Plastic Cam-and-Groove Hose
Couplings for Chemicals and Petroleum

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Plastic Cam-and-Groove Hose Couplings for Water

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Dust Caps and Plugs for International Standard ISO B
Quick-Disconnect Hose Couplings for Hydraulic Fluid

Use these dust caps and plugs to keep contaminants out of your hose line.

Dust Caps and Plugs for International Standard ISO A
Quick-Disconnect Hose Couplings for Hydraulic Fluid

Use these dust caps and plugs to keep contaminants out of your hose line.

18-8 Stainless Steel Socket Head Screws

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

Heat-Shrink End Caps

Seal the end of crimped connections, such as motor coils, to protect them from moisture.

Drain Pipe Plugs

Seal unthreaded pipe ends with these plugs. They come with a band that clamps over the outside wall of your pipe and tightens with a screwdriver.