Clear All
Material Material | Show |
|---|
|
Material Material | Hide |
|---|
Mesh Size Mesh Size |
|---|
Wire Diameter Wire Diameter |
|---|
|
|
|
Construction Construction |
|---|
 | Woven |
Shape Shape |
|---|
 | Sheet and Bar |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
About Wire Cloth and Plastic Mesh
More
Brass Wire Cloth
Brass is often used in marine environments because it is more resistant to corrosion from salt water than stainless steel. It has good abrasion resistance.
For technical drawings and 3-D models, click on a part number.
Sheets
| Mesh Size | Opening Size | Open Area | Wire Dia. | 1 ft. × 1 ft. | 1 ft. × 2 ft. | 2 ft. × 2 ft. | 2 ft. × 3 ft. | 3 ft. × 3 ft. | |
| 3 × 3 | 0.27" | 65% | 0.063" | 0000000 | |||||
| 4 × 4 | 0.203" | 65% | 0.047" | 0000000 | |||||
| 6 × 6 | 0.132" | 62% | 0.035" | 0000000 | |||||
| 8 × 8 | 0.097" | 60% | 0.028" | 0000000 | |||||
| 10 × 10 | 0.075" | 56% | 0.025" | 0000000 | |||||
| 12 × 12 | 0.06" | 51% | 0.023" | 0000000 | |||||
| 14 × 14 | 0.051" | 51% | 0.02" | 0000000 | |||||
| 16 × 16 | 0.045" | 50% | 0.018" | 0000000 | |||||
| 18 × 18 | 0.039" | 48% | 0.017" | 0000000 | |||||
| 20 × 20 | 0.034" | 46% | 0.016" | 0000000 | |||||
| 24 × 24 | 0.028" | 44% | 0.014" | 0000000 | |||||
| 30 × 30 | 0.021" | 40% | 0.012" | 0000000 | |||||
| 40 × 40 | 0.015" | 36% | 0.01" | 0000000 | |||||
| 50 × 50 | 0.011" | 30% | 0.009" | 0000000 | |||||
| 60 × 60 | 0.009" | 30% | 0.0075" | 0000000 | |||||
| 80 × 80 | 0.007" | 31% | 0.0055" | 0000000 | |||||
| 100 × 100 | 0.006" | 30% | 0.0045" | 0000000 |
Other Sizes
3 ft. Wd. | ||||||
|---|---|---|---|---|---|---|
| Mesh Size | Opening Size | Open Area | Wire Dia. | Lg., ft. | Each | |
| 3 × 3 | 0.27" | 65% | 0.063" | 1 | 00000000 | 000000 |
| 3 × 3 | 0.27" | 65% | 0.063" | 10 | 00000000 | 000000 |
| 3 × 3 | 0.27" | 65% | 0.063" | 20 | 00000000 | 000000 |
| 3 × 3 | 0.27" | 65% | 0.063" | 50 | 00000000 | 00000000 |
| 4 × 4 | 0.203" | 65% | 0.047" | 1 | 00000000 | 00000 |
| 4 × 4 | 0.203" | 65% | 0.047" | 10 | 00000000 | 000000 |
| 4 × 4 | 0.203" | 65% | 0.047" | 20 | 00000000 | 000000 |
| 4 × 4 | 0.203" | 65% | 0.047" | 50 | 00000000 | 00000000 |
| 6 × 6 | 0.132" | 62% | 0.035" | 1 | 00000000 | 00000 |
| 6 × 6 | 0.132" | 62% | 0.035" | 10 | 00000000 | 000000 |
| 6 × 6 | 0.132" | 62% | 0.035" | 20 | 00000000 | 000000 |
| 6 × 6 | 0.132" | 62% | 0.035" | 50 | 00000000 | 00000000 |
| 8 × 8 | 0.097" | 60% | 0.028" | 1 | 00000000 | 00000 |
| 8 × 8 | 0.097" | 60% | 0.028" | 10 | 00000000 | 000000 |
| 8 × 8 | 0.097" | 60% | 0.028" | 20 | 00000000 | 000000 |
| 8 × 8 | 0.097" | 60% | 0.028" | 50 | 00000000 | 00000000 |
| 10 × 10 | 0.075" | 56% | 0.025" | 1 | 00000000 | 00000 |
| 10 × 10 | 0.075" | 56% | 0.025" | 10 | 00000000 | 000000 |
| 10 × 10 | 0.075" | 56% | 0.025" | 20 | 00000000 | 000000 |
| 10 × 10 | 0.075" | 56% | 0.025" | 50 | 00000000 | 00000000 |
| 12 × 12 | 0.06" | 51% | 0.023" | 1 | 00000000 | 00000 |
| 12 × 12 | 0.06" | 51% | 0.023" | 10 | 00000000 | 000000 |
| 12 × 12 | 0.06" | 51% | 0.023" | 20 | 00000000 | 000000 |
| 12 × 12 | 0.06" | 51% | 0.023" | 50 | 00000000 | 00000000 |
| 14 × 14 | 0.051" | 51% | 0.02" | 1 | 00000000 | 00000 |
| 14 × 14 | 0.051" | 51% | 0.02" | 10 | 00000000 | 000000 |
| 14 × 14 | 0.051" | 51% | 0.02" | 20 | 00000000 | 000000 |
| 14 × 14 | 0.051" | 51% | 0.02" | 50 | 00000000 | 00000000 |
| 16 × 16 | 0.045" | 50% | 0.018" | 1 | 00000000 | 00000 |
| 16 × 16 | 0.045" | 50% | 0.018" | 10 | 00000000 | 000000 |
| 16 × 16 | 0.045" | 50% | 0.018" | 20 | 00000000 | 000000 |
| 16 × 16 | 0.045" | 50% | 0.018" | 50 | 00000000 | 00000000 |
| 18 × 18 | 0.039" | 48% | 0.017" | 1 | 00000000 | 00000 |
| 18 × 18 | 0.039" | 48% | 0.017" | 10 | 00000000 | 000000 |
| 18 × 18 | 0.039" | 48% | 0.017" | 20 | 00000000 | 000000 |
| 18 × 18 | 0.039" | 48% | 0.017" | 50 | 00000000 | 00000000 |
| 20 × 20 | 0.034" | 46% | 0.016" | 1 | 00000000 | 00000 |
| 20 × 20 | 0.034" | 46% | 0.016" | 10 | 00000000 | 000000 |
| 20 × 20 | 0.034" | 46% | 0.016" | 20 | 00000000 | 000000 |
| 20 × 20 | 0.034" | 46% | 0.016" | 50 | 00000000 | 00000000 |
| 24 × 24 | 0.028" | 44% | 0.014" | 1 | 00000000 | 00000 |
| 24 × 24 | 0.028" | 44% | 0.014" | 10 | 00000000 | 000000 |
| 24 × 24 | 0.028" | 44% | 0.014" | 20 | 00000000 | 000000 |
| 24 × 24 | 0.028" | 44% | 0.014" | 50 | 00000000 | 00000000 |
| 30 × 30 | 0.021" | 40% | 0.012" | 1 | 00000000 | 00000 |
| 30 × 30 | 0.021" | 40% | 0.012" | 10 | 00000000 | 000000 |
| 30 × 30 | 0.021" | 40% | 0.012" | 20 | 00000000 | 000000 |
| 30 × 30 | 0.021" | 40% | 0.012" | 50 | 00000000 | 00000000 |
| 40 × 40 | 0.015" | 36% | 0.01" | 1 | 00000000 | 00000 |
| 40 × 40 | 0.015" | 36% | 0.01" | 10 | 00000000 | 000000 |
| 40 × 40 | 0.015" | 36% | 0.01" | 20 | 00000000 | 000000 |
| 40 × 40 | 0.015" | 36% | 0.01" | 50 | 00000000 | 00000000 |
| 50 × 50 | 0.011" | 30% | 0.009" | 1 | 00000000 | 00000 |
| 50 × 50 | 0.011" | 30% | 0.009" | 10 | 00000000 | 000000 |
| 50 × 50 | 0.011" | 30% | 0.009" | 20 | 00000000 | 000000 |
| 50 × 50 | 0.011" | 30% | 0.009" | 50 | 00000000 | 00000000 |
| 60 × 60 | 0.009" | 30% | 0.0075" | 1 | 00000000 | 00000 |
| 60 × 60 | 0.009" | 30% | 0.0075" | 10 | 00000000 | 000000 |
| 60 × 60 | 0.009" | 30% | 0.0075" | 20 | 00000000 | 000000 |
| 60 × 60 | 0.009" | 30% | 0.0075" | 50 | 00000000 | 00000000 |
| 80 × 80 | 0.007" | 31% | 0.0055" | 1 | 00000000 | 00000 |
| 80 × 80 | 0.007" | 31% | 0.0055" | 10 | 00000000 | 000000 |
| 80 × 80 | 0.007" | 31% | 0.0055" | 20 | 00000000 | 000000 |
| 80 × 80 | 0.007" | 31% | 0.0055" | 50 | 00000000 | 000000 |
| 100 × 100 | 0.006" | 30% | 0.0045" | 1 | 00000000 | 00000 |
| 100 × 100 | 0.006" | 30% | 0.0045" | 10 | 00000000 | 000000 |
| 100 × 100 | 0.006" | 30% | 0.0045" | 20 | 00000000 | 000000 |
| 100 × 100 | 0.006" | 30% | 0.0045" | 50 | 00000000 | 000000 |
Brass Wire Cloth with Rectangular Openings
Maximize flow when straining your liquid process lines—material passes more quickly through this wire cloth's rectangular openings than through other wire cloth.
Made of brass, it has good corrosion and abrasion resistance. It’s often used with salt solutions.
For technical drawings and 3-D models, click on a part number.