Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.

For use with aluminum, brass, and copper parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

Also known as brushable ceramic, these coatings create a hard, low-friction surface. They're often used on liquid processing equipment to protect worn areas and reduce turbulence.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

No mixing required—these potting compounds come ready to apply.

Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

This potting compound is formulated for use in sensitive applications such as manufacturing semiconductors.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.

Dry to the touch in only 3 minutes, use this coating to protect circuit boards from moisture without delaying your process for drying.

To effectively dissipate heat in the tightest spaces, this coating contains a filler that acts like a shim to produce a consistent 0.005" to 0.006" gap between components.

Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.

These coatings require an ultraviolet curing lamp to reach full strength.

Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.

Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

Extend the life of your paint and coatings on damage-prone metal surfaces. When scratched or worn, these primers release small capsules of uncured primer to provide continued corrosion resistance.

Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

For invisible bond lines, these adhesives dry clear.

Even when used under water, these adhesives maintain their strength.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

These self-extinguishing epoxies meet UL 94 V-0 for flame retardance.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.

Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

Accommodate joint movement with these adhesives that remain pliable when cured.

Also known as super glue, these adhesives bond quickly.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene.

Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

Make strong, instant bonds on a variety of materials—but not your skin.

Form bonds without the strong odor of other instant-bond adhesives.

Bond plastics, porous materials, or dirty surfaces.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

These thin liquids, also known as super glue, flow into small gaps.

Form bonds without the strong odor of other instant-bond adhesives.

Invisibly bond glass and transparent plastics.

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

Temporarily stabilize objects on flat surfaces with this clear, reusable adhesive.

These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.

The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.

An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.