About Sealant Flexibility
More
About Paint and Protective Coatings
More
About Structural Adhesives
More
Coatings for Foam Insulation
Prepare foam pipe insulation for use outdoors. These coatings provide a clean, moisture-resistant finish that protects insulation from UV and ozone damage. They maintain their flexibility in the cold to resist cracking. Apply with a brush or roller. Reapply every two to four years.
Dry Time | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, qt. | Composition | Touch, hrs. | Overall, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color (Appearance) | Each | |
| 1 | Water Based | 4 | 24 | 100 sq. ft. @ 4 mil | 325° | 50° to 90° | Foam | White (Flat) | 00000000 | 000000 |
Moisture-Resistant Reflective Silicone Coatings for Roofs
Made from silicone, these coatings are more durable than acrylic coatings for roofs and have better resistance to pooling water. They reflect up to 90% of the sun's rays to reduce cooling costs. Coatings are self-leveling and have excellent adhesion to most roof surfaces. They begin to protect against rain in as few as 60 minutes after application. Apply to a dry surface with a squeegee or brush.
Dry Time | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, gal. | Composition | Surface Reflectivity | Touch, min. | Overall, hrs. | Approx. Coverage, sq. ft. | Application Temp. Range, °F | For Use On | Color | Each | |
| 1 | Solvent Based | 90% | 60 | 72 | 50 | 45° to 95° | Aluminum, Steel, Iron, Masonry, Concrete, Asphalt, Composites, Foam | White | 0000000 | 0000000 |
| 5 | Solvent Based | 90% | 60 | 72 | 250 | 45° to 95° | Aluminum, Steel, Iron, Masonry, Concrete, Asphalt, Composites, Foam | White | 0000000 | 000000 |
Reflective Acrylic Coatings for Roofs
Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal. Apply to a dry surface with a brush, roller, or sprayer.
Primer (sold separately) extends the life of the coating. It’s required for use on bare rubberized and aged asphalt roofs.
Dry Time | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, gal. | Composition | Surface Reflectivity | Touch, hrs. | Overall | Approx. Coverage, sq. ft. | Application Temp. Range, °F | For Use On | Primer Required For Use On | Color | Each | |
| 0.9 | Water Based | 85% | 6 | 30 days | 70 | 50° to 70° | Steel, Iron, Rubber, Masonry, Concrete, Asphalt, Composites, Foam | Asphalt, Rubber | White | 0000000 | 000000 |
| 4.7 | Water Based | 85% | 6 | 30 days | 330 | 50° to 70° | Steel, Iron, Rubber, Masonry, Concrete, Asphalt, Composites, Foam | Asphalt, Rubber | White | 0000000 | 000000 |
| Primer for Ultra-Reflective Coatings for Roofs—0.9 Gal. Can | 000000 | Each | 000000 |
Quick-Set Wicking Instant-Bond Adhesives
For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives. Also known as super glue, they have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
| 4501 | 0.7 | Bottle | 0.004" | 5 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 180° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
Wicking Instant-Bond Adhesives
These thin liquids, also known as super glue, flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
| 406 | 0.7 | Bottle | 0.004" | 15 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
| 406 | 16 | Bottle | 0.004" | 15 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
Instant-Bond Adhesives
Also known as super glue, these adhesives bond quickly. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
| 401 | 0.1 | Tube | 0.005" | 15 sec. | 24 hrs. | Thin Liquid (110 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
| 401 | 0.7 | Bottle | 0.005" | 15 sec. | 24 hrs. | Thin Liquid (110 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
| 401 | 16 | Bottle | 0.005" | 15 sec. | 24 hrs. | Thin Liquid (110 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
| 4471 | 0.7 | Bottle | 0.008" | 15 sec. | 24 hrs. | Thin Liquid (630 cP) | -65° to 180° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
| 4471 | 16 | Bottle | 0.008" | 15 sec. | 24 hrs. | Thin Liquid (630 cP) | -65° to 180° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
Instant-Bond Adhesive Gel for Hard-to-Bond Materials
Quickly adhere hard-to bond surfaces with these adhesives, also known as super glue. These thick gels fill gaps between parts and won't drip on vertical surfaces. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Dispense adhesives in syringes with a dispensing gun (sold separately).
Dispense adhesives in cartridges with a standard caulk gun.
PR Gel works especially well on plastic and rubber.
454 and 4541 are suitable for porous and dissimilar materials.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
| 454 | 0.1 | Tube | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
| 454 | 0.3 | Syringe | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
| 454 | 0.7 | Tube | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
| 454 | 1 | Syringe | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
| 454 | 7 | Tube | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
| 454 | 10.5 | Cartridge | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
Construction Adhesives
Install building materials such as wood and drywall with these general purpose adhesives.
Silicone adhesives resist a wider range of temperatures than latex adhesives.
Container | Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
Liquid Nails Silicone Rubber Adhesives | ||||||||||||||
| LN-207 | 2.5 fl. oz. | Tube | 7 ft. @ 1/4" bead | 20 min. | 72 hrs. | 105 | 10 | Paste | -80° to 300° | Clear | Yes | Foam, Masonry, Plastic, Rubber | 0000000 | 00000 |
Construction Adhesives for Dissimilar Materials
Bond stone and glass to drywall, treated lumber, and subfloors with these adhesives.
Container | Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in | Peel, lbs./in. wd. | Consistency | Temp. Range, °F | For Use Outdoors | For Joining | Color | Each | |
Liquid Nails Adhesives | ||||||||||||||
| LN-950 | 10 | Cartridge | 30 ft. @ 1/4" bead | 30 min. | 48 hrs. | 250 | Not Rated | Paste | -40° to 300° | Yes | Ceramics, Composites, Foam, Glass, Masonry, Plastic, Rubber | Beige | 0000000 | 00000 |
Construction Adhesives for Interior Walls
Install foam insulation, drywall, and paneling with these water-resistant adhesives.
Container | Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
Liquid Nails Adhesives | ||||||||||||||
| LN-604 | 10 | Cartridge | 30 ft. @ 1/4" bead | 30 min. | 7 days | 400 | Not Rated | Paste | 20° to 120° | Off-White | Yes | Foam, Masonry, Wood | 0000000 | 00000 |
Contact Adhesives
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Black adhesive works especially well on foam insulation.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | Color | For Joining | Each | |
3M Adhesives | ||||||||||||
| 1099 | 32 fl. oz. | Can | 40 min. | 72 hrs. | 3,405 | Thick Liquid | 3,000 | -10° to 230° | Beige | Fabric, Foam, Plastic, Rubber | 00000000 | 000000 |
| 1099 | 1 gal. | Can | 40 min. | 72 hrs. | 3,405 | Thick Liquid | 3,000 | -10° to 230° | Beige | Fabric, Foam, Plastic, Rubber | 00000000 | 000000 |
Pliobond Adhesives | ||||||||||||
| 35 | 8 fl. oz. | Brush-Top Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | 0000000 | 00000 |
| 35 | 16 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | 0000000 | 00000 |
| 35 | 32 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | 0000000 | 00000 |
| 35 | 1 gal. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | 0000000 | 000000 |
Adhesives | ||||||||||||
| __ | 16 fl. oz. | Brush-Top Can | 3 min. | 36 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 250° | Black | Foam, Masonry, Metal, Plastic, Rubber | 00000000 | 00000 |
Quick-Set Contact Adhesives
Bonds reach full strength in 10 minutes. Apply this adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, gal. | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | For Joining | Color | Each | |
3M Adhesives | ||||||||||||
| 1000NF | 1 | Jug | 60 sec. | 10 min. | 400 | Thin Liquid | 750 | 60° to 80° | Fabric, Foam, Wood | Purple | 00000000 | 0000000 |