We will reply to your message within an hour.
More
Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
Even when used under water, these adhesives maintain their strength.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
Solvents, oils, acids, and other chemicals won't degrade the bond of these adhesives.
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.
Also known as super glue, these adhesives bond quickly.
These adhesives withstand temperatures of 390° F or more.
Accommodate joint movement with these adhesives that remain pliable when cured.
Form bonds in 5 seconds or less.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene.
Form bonds without the strong odor of other instant-bond adhesives.
In especially damp or humid environments, these adhesives keep their hold.
Use these adhesives in applications that are highly sensitive to contaminants.
Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.
These adhesives withstand temperatures up to 480° F.
To invisibly bond transparent plastics, these adhesives won’t turn cloudy.
These thin liquids, also known as super glue, flow into small gaps.
For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives.
Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.
Bond plastics, porous materials, or dirty surfaces.
These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Bond porous materials with these low-odor, nonflammable adhesives.