For Use On For Use On | Show |
|---|
|
For Use On For Use On | Hide |
|---|
Type Type |
|---|
|
Formulation Formulation |
|---|
|
|
Consistency Consistency |
|---|
|
Clarity Clarity |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
|---|
|
Maximum Application Temperature Maximum ApplicationTemperature |
|---|
|
Minimum Application Temperature Minimum ApplicationTemperature |
|---|
|
Contains Aggregate Contains Aggregate |
|---|
|
Appearance Appearance |
|---|
|
About Paint and Protective Coatings
More
Coatings for Grout
Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.
Dry Time | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, oz. | Composition | Touch, hrs. | Overall, hrs. | Approx. Coverage, sq. ft. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Includes | Color (Appearance) | Each | |
| 22 | Water Based | 2 | 24 | 200 | 80° | 50° to 80° | Grout | Trigger Sprayer | Clear (Flat) | 0000000 | 00000 |
Water-Resistant Surface Fillers
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
Paste fillers resist alkalies, solvents, gasoline, and oil.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Surface Fillers | ||||||||||||||
| 2 | Tube | 5 | 24 hrs. | Paste | 1:1 | 12 sq. in. @ 1/4" | 1/2" | Yes | Not Rated to 200° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 000000 |
| 2 | Jar, Bottle | 20 | 60 min. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Yes | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
| 2 | Jar, Bottle | 20 | 60 min. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Yes | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
| 14 | Can, Jar | 20 | 60 min. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Yes | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
| 14 | Can, Jar | 20 | 60 min. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Yes | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | 0000000 | 00000 |
High-Flow Leak-Stopping Concrete Crack Fillers
Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink. When fully cured they create a seal that can withstand pressure of up to 2,000 psi. Apply with a dispensing gun (sold separately). The size listed is the combined total of the two parts. A mixer nozzle is included.
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Begins to Harden, sec. | Reaches Full Strength, min. | Consistency | For Max. Crack Wd. | Approx. Coverage @ Thick. | Max. Thick. | Application Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
| 20.2 | Cartridge | 3 | 60 | Thin Liquid | 3/4" | 5 ft. @ 1/2" | 1/2" | 35° to 90° | Amber | Drill, Sand, Saw | Concrete, Ceramic, Porcelain, Grout, Masonry, Asphalt, Stone | 000000 | 000000 |
| Dispensing Gun | 000000 | Each | 000000 |
Leak-Stopping Concrete Crack Fillers
Stop slow-flowing and weeping leaks in concrete. These crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.
Polyurethane fillers are thin to penetrate deep into cracks. When fully cured they create a seal that can withstand pressure of up to 2,000 psi. Apply with a standard caulk gun (sold separately). For especially large cracks, use a packer (sold separately) with a grease gun or a grout pump.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Formulation | Consistency | For Max. Crack Wd. | Approx. Coverage @ Thick. | Max. Thick. | Application Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
| 10.1 oz. | Cartridge | 3 | 24 | Polyurethane | Thin Liquid | 3/4" | 15 ft. @ 1/2" | 1/2" | 35° to 90° | Amber | Sand | Concrete, Ceramic, Porcelain, Grout, Masonry, Asphalt, Stone | 000000 | 000000 |
| Material | For Hole Dia. | Each | |
| Steel | 5/8" | 000000 | 00000 |
Epoxy Grout
Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals, such as acids, alkalies, salt water, and common solvents and cleaners. Its lightweight formula makes this grout easy to spread. Use in horizontal or vertical joints—grout won’t sag or shrink. Apply with a grout float. It can be cleaned up with water when wet; it doesn’t require a sealer once it cures. The size listed is the combined total of the two parts.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Color | Size, lbs. | Type | Begins to Harden, hrs. | Reaches Full Strength, days | Consistency | Mix Ratio | For Max. Crack Wd. | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Application Temp. Range, °F | For Use On | Each | |
| Black | 1.3 | Pail | 7 | 3 | Thick Liquid | 1:1 | 1/2" | 95 sq. ft. @ 1/4" | 1/2" | Yes | 70° to 85° | Concrete, Plaster, Ceramic, Porcelain, Grout, Masonry, Stone | 00000000 | 0000000 |
| Brown | 1.3 | Pail | 7 | 3 | Thick Liquid | 1:1 | 1/2" | 95 sq. ft. @ 1/4" | 1/2" | Yes | 70° to 85° | Concrete, Plaster, Ceramic, Porcelain, Grout, Masonry, Stone | 00000000 | 000000 |
| White | 1.3 | Pail | 7 | 3 | Thick Liquid | 1:1 | 1/2" | 95 sq. ft. @ 1/4" | 1/2" | Yes | 70° to 85° | Concrete, Plaster, Ceramic, Porcelain, Grout, Masonry, Stone | 00000000 | 000000 |
Grout
Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring. Apply with a grout float.
Acrylic grout does not require mixing. It resists shrinking, cracking, and staining.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Reaches Full Strength | Consistency | For Max. Crack Wd. | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Application Temp. Range, °F | Color | For Use On | Each | |
Acrylic | ||||||||||||
| 1 gal. | Pail | 24 hrs. | Paste | 1/2" | 101 sq. ft. @ 1/4" | 1/2" | No | 50° to 100° | Beige | Concrete, Plaster, Ceramic, Porcelain, Grout, Masonry, Asphalt, Stone | 00000000 | 000000 |
| 1 gal. | Pail | 24 hrs. | Paste | 1/2" | 101 sq. ft. @ 1/4" | 1/2" | No | 50° to 100° | Gray | Concrete, Plaster, Ceramic, Porcelain, Grout, Masonry, Asphalt, Stone | 00000000 | 00000 |
| 1 gal. | Pail | 24 hrs. | Paste | 1/2" | 101 sq. ft. @ 1/4" | 1/2" | No | 50° to 100° | White | Concrete, Plaster, Ceramic, Porcelain, Grout, Masonry, Asphalt, Stone | 00000000 | 00000 |
Drill-Bit Counterbore Sets
