Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

These coatings meet UL 723 and are rated Class A by ASTM E84—the highest rating available—for their ability to limit the spread of flames and generation of smoke. Use them in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.

Put a temporary dull finish on glossy surfaces. Wipe to remove.

Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

To effectively dissipate heat in the tightest spaces, this coating contains a filler that acts like a shim to produce a consistent 0.005" to 0.006" gap between components.

Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

Hot-melt potting compounds have excellent flexibility, good chemical and moisture resistance, and withstand a range of temperatures. They provide good electrical insulation.

This potting compound is formulated for use in sensitive applications such as manufacturing semiconductors.

Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application.

Made of rubber and iron oxide, these sheets can be cut with scissors to create custom-shaped nonmetallic, nonmagnetic surface that magnets will stick to.

Hide blemishes and protrusions on shingles and flashing. This paint matches common roofing material.