Polystyrene Plastic Coatings

Clear All

	For Use On For Use On	Show

Polystyrene Plastic

	For Use On For Use On	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	Container Type Container Type


Aerosol Can	Can

Cartridge	Jar

Jug	Mixer Cup

Patch	Pen

Stick	Syringe

	Color Color

	Black		Clear
	White		Gray
	Red		Blue
	Green		Brown
	Amber		Off-White

	Maximum Temperature Maximum Temperature

Less than 250° F

250° to 499° F

500° to 999° F

	Consistency Consistency

	Formulation Formulation

	Type Type

Surface Filler

	Reaches Full Strength Reaches Full Strength

	Begins to Harden Begins to Harden

	Manufacturer Manufacturer

Loctite®

	Container Size Container Size

	Finishing Method Finishing Method

	Mixing Required Mixing Required

Yes

	Clarity Clarity

Clear

Semi-Clear

Opaque

	Appearance Appearance

Satin

Matte

Eggshell

	Maximum Thickness Maximum Thickness

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Minimum Temperature Minimum Temperature

	For Use Outdoors For Use Outdoors

Yes

	Manufacturer Model Number Manufacturer Model Number

	Manufacturer Model Name Manufacturer Model Name

Fixmaster Epoxy

Fixmaster Poxy Pak™

Fixmaster Underwater Repair
Epoxy

	Mix Ratio Mix Ratio

1:1

1.5:1

	Approximate Coverage @ Thickness Approximate Coverage @ Thickness

View catalog pages (5)

Forward

How can we improve?

30 Products

Surface Fillers

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On	Pkg. Qty.		Pkg.
Loctite® Fixmaster Epoxy
EA 445	0.1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 445	1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 9131	0.1 oz.	Mixer Cup	90	24 hrs.	Thick Liquid	1.5:1	1 sq. in. @ 1/4"	-65° to 180°	White	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	00000
														Each
Loctite® Fixmaster Poxy Pak™
EA 9017	0.8 oz.	Syringe	5	60 min.	Thick Liquid	1:1	Not Rated	-65° to 300°	Clear	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Concrete, Glass, Wood	__	0000000	0000

Surface Filler Patches

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Surface Fillers
Lg.	Wd.	Begins to Harden, min.	Reaches Full Strength, hrs.	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
2"	12"	1	24	1:1	Yes	-85° to 220°	Red	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	000000
2"	20"	1	24	1:1	Yes	-85° to 220°	Amber	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
4"	6"	1	24	1:1	Yes	-85° to 220°	Blue	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
4"	12"	1	24	1:1	Yes	-85° to 220°	Green	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000

Coolant-Resistant Surface Fillers

Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.

Container
Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Temp. Range, °F	Color	For Use On		Each
16	Jug	7	10	Thick Liquid	Not Rated to 500°	Brown	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Galvanized Steel, Galvanized Iron, Titanium, Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, PTFE Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	000000

Water-Resistant Surface Fillers

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.

Paste fillers resist alkalies, solvents, gasoline, and oil.

	Container
Mfr. Model No.	Size, oz.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Underwater Repair Epoxy
EA 9490	4	Stick	15	60 min.	Putty	__	16 sq. in. @ 1/4"	1/4"	Yes	Not Rated to 300°	White	Machine, Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Concrete, Wood	0000000	000000
Surface Fillers
__	12	Jar	30	24 hrs.	Paste	1:1	85 sq. in. @ 1/4"	1"	Yes	50° to 210°	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	0000000	00000
__	24	Can	30	24 hrs.	Paste	1:1	170 sq. in. @ 1/4"	1"	Yes	50° to 210°	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	0000000	00000
__	48	Can	30	24 hrs.	Paste	1:1	340 sq. in. @ 1/4"	1"	Yes	50° to 210°	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	0000000	00000

Aerosol Surface Fillers for Plastic

Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon. Surface fillers are clear when dry. They cannot be sold to Canada due to local chemical regulations.

Match the appearance of the surface filler to your part. Satin reflects the most light and seems to shine. Matte reflects almost no light and appears dull. Eggshell reflects some light but is duller than satin.

Appearance	Container Size, oz.	Spray Position	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Approximate Coverage @ Thick.	Max. Thick., mil	For Use Outdoors	Temp. Range, °F	Color	For Use On	Cannot Be Sold To		Each
Satin	16	Upright	5	60	Thin Liquid	15 sq. ft. @ 1 mil	1	No	45° to 100°	Clear	Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon	Canada	0000000	000000
Matte	16	Upright	5	60	Thin Liquid	15 sq. ft. @ 1 mil	1	No	45° to 100°	Clear	Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon	Canada	0000000	00000
Eggshell	16	Upright	5	60	Thin Liquid	15 sq. ft. @ 1 mil	1	No	45° to 100°	Clear	Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon	Canada	0000000	00000

Light-Activated Surface Filler Pens for Plastic

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure. Surface fillers work with most kinds of plastic, as well as wood, particleboard, and medium density fiberboard (MDF).

Pens

Formulation	Container Size, oz.	Begins to Harden, sec.	Reaches Full Strength, sec.	Consistency	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On	Batteries Included		Each
Acrylic	0.2	3	15	Gel	Yes	0° to 245°	Clear	Drill, Sand	Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PVDF Plastic, Vinyl Plastic, Fiberglass, Wood	Yes	0000000	000000

Refill Cartridges

Formulation	Color	Clarity	Consistency	Container Size, oz.		Each
Acrylic	Black	Opaque	Gel	0.2	0000000	000000
Acrylic	Clear	Clear	Gel	0.2	0000000	00000
Acrylic	Dark Brown	Opaque	Gel	0.2	0000000	00000
Acrylic	Light Brown	Opaque	Gel	0.2	0000000	00000
Acrylic	White	Opaque	Gel	0.2	0000000	00000

Surface Fillers for Plastic

Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.

Surface fillers in a cartridge come with a mixer nozzle, but require a gun (sold separately) for dispensing. For best results, use a primer (sold separately).

Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. Use with most rigid and semi-rigid types of plastic. They meet NSF/ANSI 61 for use with drinking water.

Container
Size	Type	Begins to Harden	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Surface Fillers
1.7 oz.	Cartridge	5 min.	30 min.	Thick Liquid	1:1	11 sq. in. @ 1/4"	-20° to 180°	Gray	Sand	Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	000000
1.7 oz.	Cartridge	20 sec.	60 min.	Thick Liquid	1:1	11 sq. in. @ 1/4"	-20° to 180°	Amber	Sand	Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	00000
1.7 oz.	Cartridge	50 sec.	60 min.	Thick Liquid	1:1	11 sq. in. @ 1/4"	-20° to 180°	Black	Sand	Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	00000
4 oz.	Stick	20 min.	24 hrs.	Putty	__	16 sq. in. @ 1/4"	-40° to 250°	Off-White	Drill, Sand, Saw	Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic	0000000	0000

Replacement Plunger for Surface Fillers in a Cartridge	Each	00000
Primer for Surface Fillers in a Cartridge	Each	00000
Replacement Mixer Nozzle for Surface Fillers in a Cartridge	Each	0000
Dispensing Gun for Surface Fillers in a Cartridge	Each	00000