This coating is formulated for use in sensitive applications such as manufacturing semiconductors. Thinner than potting compounds, the coating flows easily into small spaces between electrical components. Use it to secure and insulate hardware on printed circuit boards. Rigid and wear resistant, has excellent chemical and moisture resistance, withstands a wide range of temperatures, and provides excellent electrical insulation. It requires a gun and a mixer nozzle (each sold separately) to dispense.

Thinner than potting compounds, these coatings flow easily into small spaces between electrical components. They require an ultraviolet curing lamp to reach full strength. Use them to secure and insulate hardware on printed circuit boards.

Syringe coatings require a gun (sold separately) to dispense.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors. Thinner than potting compounds, it flows easily into small spaces between electrical components. The coating begins to harden when exposed to UV light. Use it to secure and insulate hardware on printed circuit boards. It requires a gun (sold separately) to dispense.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

This thermally conductive coating keeps electrical components cool by dissipating heat. Use it to bond transformers, transistors, and other heat-generating components to printed circuit boards and heat sinks. It requires a gun (sold separately) to dispense.

Ideal for use with sensitive electronics and optics, these coatings give off almost no volatile emissions and maintain a stable temperature. They’ve been tested to meet ASTM E595, a low-outgassing standard used by NASA. Originally developed as a coating for spacecrafts, they release internal heat and reflect external heat. Since these coatings are inorganic, you can store them at room temperature. They’ll also last longer on your equipment than organic coatings.

Protect LEDs, solar cells, and fiber optics with a coating that’s clear enough to see through. These coatings let optimal light pass through and repel dust and moisture, so they won’t distort your view of what’s underneath. Made of silicone, they won’t cloud in hot, humid environments. That means they’re great for use outdoors, such as on signs and instrumentation panels. Also known as conformal coatings, these coatings are thinner than potting compounds, flowing into the smallest contours on your device to cover it completely. Silicone conformal coatings are the most flexible kind of conformal coating, so they won’t crack or peel from vibration. To protect sensitive equipment, these coatings also prevent static discharge.

Simply spray these coatings on your device without needing a potting box or other container. Since they cure at room temperature, you won’t need UV lights or cure ovens either. You can remove them if necessary.

These coatings are IPC certified for use with circuit boards. They also meet UL 94 V-0 for flame retardance.

These coatings cannot be sold outside of North America due to regulatory limits on VOCs (volatile organic compounds).

Hide proprietary information on electrical components while also protecting them from moisture, dust, and static. All it takes is a single thin layer of these black coatings. They’re often used to protect custom parts while prototyping. Place them under a UV curing lamp to fully harden them in just 5 seconds. Made of urethane, they resist chemicals and scratches and won’t crack in low temperatures. That means they’re great for harsh environments. These coatings meet UL 94 V-0 for flame retardance.

Also known as conformal coatings, they’re thinner than potting compounds, so they flow into the smallest contours to cover your parts completely. They also don’t require a potting box or other container. Dispense these coatings with a gun (sold separately).

Shield circuit boards from flux, solder, conformal coatings, and high temperatures. Heat resistant up to 640° F, these temporary coatings are most often used to protect open through-holes and components during wave soldering. Coatings can also act as a short-term adhesive to keep parts in place when you’re soldering a two-sided SMT circuit board. An alternative to masking tapes that require cutting to shape, these gel coatings flow easily into small spaces and don’t leave a residue when removed. They’re also known as solder masks. Product regulations restrict sales to the listed jurisdictions/areas.

Choose wash-away coatings if you use a water-based cleaning process such as a batch or in-line cleaning system. Wash-away coatings with a one-hr. overall dry time are nonflammable. They’re not completely water soluble, so they can’t be used in closed-loop cleaning systems. Coatings with a two-hr. overall dry time are completely water soluble for use in closed-loop cleaning systems. They’re slightly flammable.

Choose peel-away coatings if you use a solvent-based cleaning process or don’t clean your circuit boards. Coatings with a 15-min. overall dry time cure more evenly than peel-away coatings with a one-hr. overall dry time, so they can be applied in thick layers. They’re also nonflammable. Peel-away coatings with a one-hr. overall dry time produce low odors because they don’t contain ammonia.

No mixing required—these potting compounds come ready to apply. Use them to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They're also known as RTV (room-temperature vulcanizing) compounds because they don’t need heat or UV light to cure.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics. Use them to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, these silicone compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have excellent electrical insulation and good moisture resistance but poor chemical and abrasion resistance. Also known as RTV (room-temperature vulcanizing).

Compounds in a cartridge come with a mixer nozzle for precise application. You need a gun (sold separately) to dispense.

Compounds in a bottle are easy to apply in high volumes. Just mix and pour them over components inside containers, such as potting boxes.

Liquid compounds harden around your component to form a strong, durable, and permanent layer of protection.

Gel compounds form a soft and flexible layer of protection. You can also remove them if you need to re-access your components. They are rated IP68 once potted, so they seal out water even if submersed.

Tested to meet ASTM E595, a standard used by NASA, these compounds produce almost no volatile emissions that could damage sensitive electronics, even in a vacuum. Light passes through them easily, so they’re ideal for protecting solar cells and fiber optics. Made of silicone, these compounds are softer and more flexible than epoxy and urethane compounds. That means they’re better at protecting against shocks and vibration. They also withstand a wider range of temperatures, so you can use them with electronics that heat and cool rapidly. These compounds are excellent electrical insulators, and they’ll shield your components from moisture and dust. However, they don’t hold up well to chemicals or scrapes. They’re also known as RTV (room-temperature vulcanizing).

These compounds are easy to apply in high volumes. Just mix the two parts together and pour them over components inside a container, such as a potting box.

These compounds dry quickly when exposed to UV light allowing you to handle the potted items sooner. Made of silicone, they’re softer and more flexible than epoxy or urethane compounds, so they’re better at protecting against shocks and vibration. They also withstand a wider range of temperatures, so they’re often used with electronics that heat and cool rapidly. These compounds are excellent electrical insulators, and they’ll shield your components from moisture and dust. However, they don’t hold up well to abrasion or chemicals. The tapered nozzle lets you apply them precisely.

Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.

Compounds that cannot be sold to Canada are restricted by product labeling requirements.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

Cartridge potting compound requires a gun and mixer nozzle (each sold separately) to dispense.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.

Handle potted items within minutes—these potting compounds dry quickly when exposed to UV light. For added strength and durability, cure them with heat. Since they’re epoxy, they won’t break down from chemicals or moisture. They’re also excellent electrical insulators and withstand a wide range of temperatures. Use them to shield components from dust, moisture, chemicals, mechanical shock, and vibration. You need a mixer nozzle (not included) and a gun and plunger (both sold separately) to dispense. The nozzle lets you apply these compounds precisely.

For maximum effectiveness, these compounds need to be heat cured after they’re cured with UV light. Overall dry time includes heat curing at 149° F.

Protect circuit boards and other electronics from fire and heat. These self-extinguishing compounds meet UL 94V-0 for flame retardance and withstand temperatures up to nearly 400° F. Use them to shield components from dust, moisture, chemicals, mechanical shock, and vibration. Since they’re epoxies, they won’t break down from chemicals or moisture. They’re also excellent electrical insulators. These compounds have the consistency of honey once they’re mixed, so they seep into crevices to encase intricate components. They’re not for sale in Canada.

Cartridge compounds dispense through a mixer nozzle for precise application. Use them with a dispensing gun.

Can compounds are easier to apply in high volumes than cartridge compounds. Mix them together and pour them over components inside containers, such as a potting box. If you see air bubbles after mixing, put the mixture in a vacuum chamber to remove them.

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.