We will reply to your message within an hour.
These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F.
Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.
Tough and long-lasting, these flexible coatings protect against rust and corrosion.
Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.
These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.
Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.
Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.
Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.
These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.
Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.
Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.
These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.
These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.
Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.
Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.
Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.
Use these coatings on structural lumber, decking, and wood shingles.
Protect clothing, furniture, and other fabric with these oil- and water-repellent coatings. Also known as oleophobic and hydrophobic coatings, they work into a fabric’s individual fibers to repel liquid and grease.
Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.
Refinish porcelain sinks, tubs, and tile and give laminates a high-gloss finish.
This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.
Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.
Cover scratches and wear on heavy equipment, such as tractors, excavators, and bulldozers.
Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.
This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.
Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading.
Make your surface magnetic with this paint.
Make items stand out under emergency lighting or in low-light environments.
Enhance, renew, and protect surfaces.
This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.
Create a washable writing surface.
Turn any surface into a dry-erase board.
Stain and seal in one application to protect and refresh the appearance of wood surfaces.
Spray this paint onto trees, logs, or cut wood—even in the rain—to create a bright mark that can be seen at a distance.
Touch-up nicks and scratches on wood.
This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices.
Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher.
Mark traffic lanes, parking lots, and factory floors.
Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.
Prepare metal surfaces for powder coating. These primers create a base layer that bonds with your top coat to extend the life of your powder coating.
Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings.
Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.
Prepare metal, wood, and concrete for paint. Primers adhere to underlying surfaces to create a base layer that bonds well with paint for a long-lasting finish.
These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings.
These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating.
Use this zero-VOC primer on drywall in enclosed occupied areas, such as hospitals, schools, and offices, to extend the life of paint.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.
Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.
These patching compounds are the most flexible and watertight we offer.
Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
Fill cracks with these coatings to stop leaks and deaden sound.
Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.
Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.
Press these putty-like fillers into cracks in wood up to 1/8" wide.
Spray these compounds onto ceilings to create a popcorn texture that covers stains, patches, and chips. The nozzle is upright for easy application.
Fix damaged wood or build up and replace missing wood.
Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.
Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
Even when used under water, these adhesives maintain their strength.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.
For invisible bond lines, these adhesives dry clear.
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.
Bond most materials without the strong odor of other epoxy adhesives.
No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.
Also known as super glue, these adhesives bond quickly.
Accommodate joint movement with these adhesives that remain pliable when cured.
Form bonds in 5 seconds or less.
Form bonds without the strong odor of other instant-bond adhesives.
Use these adhesives in applications that are highly sensitive to contaminants.
Make strong, instant bonds on a variety of materials—but not your skin.
Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.
These thin liquids, also known as super glue, flow into small gaps.
For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives.
These thick gels fill gaps up to 0.2" wide—the largest of any of our instant-bond adhesives.
Bond plastics, porous materials, or dirty surfaces.
For easy positioning, these adhesives begin to harden only when exposed to light.
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Bond porous materials with these low-odor, nonflammable adhesives.
Bonds reach full strength in 10 minutes.
Bond both soft and hard wood.
This glue withstands limited exposure to water.
In addition to being waterproof, this glue is made of FDA listed materials.
This general purpose glue tackles a variety of repairs.
These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.
This glue withstands temperatures up to 500° F.
Also known as Gorilla Glue, this glue expands to form stronger bonds than other glue.
Bond glass and stone to drywall, treated lumber, and subfloors.
Install building materials such as wood and drywall with these general purpose adhesives.
Install vinyl and rubber treads on stairs with this adhesive.
Bond carpeting, vinyl tile, and other floor coverings to subfloors.
Use these adhesives to bond lumber and plywood.
Adhere vinyl and rubber wall bases to wood, drywall, and concrete.
Install foam insulation, drywall, and paneling with these adhesives.
The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.
Remaining flexible after curing, these glue sticks accommodate joint movement.
When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds.