For Use With For Use With |
|---|
|
Tube Material Tube Material |
|---|
|
Plate Material Plate Material |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Heating/Cooling Capacity Heating/Cooling Capacity |
|---|
Flow Capacity Flow Capacity |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Overall Length Overall Length |
|---|
|
Overall Height Overall Height |
|---|
Surface Area Surface Area |
|---|
|
Material Material |
|---|
|
Heat Exchanger Type Heat Exchanger Type |
|---|
|
Plate Finish Plate Finish |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Air Conditioner Cooling Capacity
More
Cold Plates
Connect these plates to cold liquid lines in process chillers and liquid-to-air cooling systems to cool equipment through direct contact. All have U-shaped tubes that pass through a thermally conductive aluminum plate. Drill or tap the plate for mounting.
Cold plates with 316 stainless steel tubes can stand up to corrosive liquid and deionized water.
For technical drawings and 3-D models, click on a part number.
Heat Pipes
Protect computers, sensitive electronic components, lighting, injection molders, and HVAC systems from damage by routing heat away from them and toward a heat sink, where the heat can be dissipated. For best results, heat pipes should be soldered to heat sinks and other components. For small jobs and prototypes, however, they can be joined with thermal epoxy. Cooling capacity is the amount of heat that a heat pipe can carry.
Flat heat pipes, often called vapor chambers, can be embedded into your heat sink to spread heat uniformly across the base, helping the heat to dissipate faster.
Heat pipes with a grooved wick transfer heat better than those with a sintered wick, meaning they can carry more heat. They are not good, however, for applications that will require many bends in the pipe. Position them horizontally, since they do not work well against gravity.
Heat pipes with a sintered wick handle high fluctuations in temperature better than those with a grooved wick. They’re also best for applications that will require many bends in the pipe. Position them horizontally or vertically—they work well in both orientations.
Use optional heat pipe benders to create smooth, accurate bends in round heat pipe. These specially designed tools allow a smooth bending motion to reduce marks on your pipe, which ordinary pliers can often leave behind. All have graduation markings to prevent over bending, which can reduce the ability of your heat pipe to transfer heat. Every 45° bend in a heat pipe will reduce the cooling capacity of the heat pipe by about 2.5%. Place these tools on benches, vises, and workstations without scratching them—all have rubber mounting feet.
Heat Pipes | Heat Pipe Benders | |||||||
|---|---|---|---|---|---|---|---|---|
| Length, mm | Cooling Capacity (Installed Length) | Temperature Range, °F | Material | Working Fluid | Each | Each | ||
Grooved Wick | ||||||||
4 mm OD | ||||||||
| 200 | 100 Btu/hr. (125 mm), 130 Btu/hr. (100 mm), 90 Btu/hr. (150 mm) | 90° to 245° | Copper | Water | 0000000 | 000000 | 0000000 | 0000000 |
| 300 | 60 Btu/hr. (200 mm), 90 Btu/hr. (150 mm), 50 Btu/hr. (250 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 | 0000000 | 000000 |
6 mm OD | ||||||||
| 200 | 170 Btu/hr. (125 mm), 210 Btu/hr. (100 mm), 140 Btu/hr. (150 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 | 0000000 | 000000 |
| 300 | 130 Btu/hr. (200 mm), 180 Btu/hr. (150 mm), 100 Btu/hr. (250 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 | 0000000 | 000000 |
Sintered Wick | ||||||||
4 mm OD | ||||||||
| 100 | 210 Btu/hr. (40 mm), 170 Btu/hr. (50 mm), 140 Btu/hr. (60 mm) | 90° to 245° | Copper | Water | 0000000 | 0000 | 0000000 | 000000 |
| 150 | 140 Btu/hr. (60 mm), 110 Btu/hr. (75 mm), 90 Btu/hr. (90 mm) | 90° to 245° | Copper | Water | 0000000 | 0000 | 0000000 | 000000 |
| 200 | 100 Btu/hr. (80 mm), 80 Btu/hr. (100 mm), 70 Btu/hr. (120 mm) | 90° to 245° | Copper | Water | 0000000 | 0000 | 0000000 | 000000 |
| 250 | 80 Btu/hr. (100 mm), 60 Btu/hr. (125 mm), 50 Btu/hr. (150 mm) | 90° to 245° | Copper | Water | 0000000 | 0000 | 0000000 | 000000 |
6 mm OD | ||||||||
| 70 | 650 Btu/hr. (28 mm), 520 Btu/hr. (35 mm), 430 Btu/hr. (42 mm) | 90° to 245° | Copper | Water | 0000000 | 0000 | 0000000 | 000000 |
| 100 | 450 Btu/hr. (40 mm), 360 Btu/hr. (50 mm), 300 Btu/hr. (60 mm) | 90° to 245° | Copper | Water | 0000000 | 0000 | 0000000 | 000000 |
| 150 | 300 Btu/hr. (60 mm), 240 Btu/hr. (75 mm), 200 Btu/hr. (90 mm) | 90° to 245° | Copper | Water | 0000000 | 0000 | 0000000 | 000000 |
| 250 | 180 Btu/hr. (100 mm), 140 Btu/hr. (125 mm), 120 Btu/hr. (150 mm) | 90° to 245° | Copper | Water | 0000000 | 0000 | 0000000 | 000000 |
| 350 | 120 Btu/hr. (140 mm), 100 Btu/hr. (175 mm), 80 Btu/hr. (210 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 | 0000000 | 000000 |
8 mm OD | ||||||||
| 70 | 940 Btu/hr. (28 mm), 760 Btu/hr. (35 mm), 630 Btu/hr. (42 mm) | 90° to 245° | Copper | Water | 0000000 | 0000 | 0000000 | 000000 |
| 100 | 660 Btu/hr. (40 mm), 530 Btu/hr. (50 mm), 440 Btu/hr. (60 mm) | 90° to 245° | Copper | Water | 0000000 | 0000 | 0000000 | 000000 |
| 150 | 440 Btu/hr. (60 mm), 350 Btu/hr. (75 mm), 290 Btu/hr. (90 mm) | 90° to 245° | Copper | Water | 0000000 | 0000 | 0000000 | 000000 |
| 200 | 330 Btu/hr. (80 mm), 260 Btu/hr. (100 mm), 220 Btu/hr. (120 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 | 0000000 | 000000 |
| 350 | 190 Btu/hr. (140 mm), 150 Btu/hr. (175 mm), 120 Btu/hr. (210 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 | 0000000 | 000000 |
| Length, mm | Thickness, mm | Cooling Capacity (Installed Length) | Temperature Range, °F | Material | Working Fluid | Each | |
Sintered Wick | |||||||
|---|---|---|---|---|---|---|---|
5.1 mm Width | |||||||
| 70 | 2.5 | 160 Btu/hr. (42 mm), 130 Btu/hr. (53 mm), 110 Btu/hr. (63 mm) | 90° to 245° | Copper | Water | 0000000 | 000000 |
| 100 | 2.5 | 110 Btu/hr. (60 mm), 90 Btu/hr. (75 mm), 70 Btu/hr. (90 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 |
| 150 | 2.5 | 70 Btu/hr. (90 mm), 60 Btu/hr. (113 mm), 50 Btu/hr. (135 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 |
| 200 | 2.5 | 50 Btu/hr. (120 mm), 40 Btu/hr. (150 mm), 30 Btu/hr. (180 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 |
6.44 mm Width | |||||||
| 70 | 3 | 220 Btu/hr. (42 mm), 170 Btu/hr. (53 mm), 150 Btu/hr. (63 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 |
| 100 | 3 | 150 Btu/hr. (60 mm), 120 Btu/hr. (75 mm), 100 Btu/hr. (90 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 |
| 150 | 3 | 100 Btu/hr. (90 mm), 80 Btu/hr. (113 mm), 60 Btu/hr. (135 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 |
| 200 | 3 | 70 Btu/hr. (120 mm), 60 Btu/hr. (150 mm), 50 Btu/hr. (180 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 |
9.45 mm Width | |||||||
| 75 | 5 | 380 Btu/hr. (45 mm), 310 Btu/hr. (56 mm), 250 Btu/hr. (68 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 |
| 150 | 5 | 190 Btu/hr. (90 mm), 150 Btu/hr. (113 mm), 120 Btu/hr. (135 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 |
| 200 | 5 | 140 Btu/hr. (120 mm), 110 Btu/hr. (150 mm), 90 Btu/hr. (180 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 |
| 350 | 5 | 80 Btu/hr. (210 mm), 60 Btu/hr. (263 mm), 50 Btu/hr. (315 mm) | 90° to 245° | Copper | Water | 0000000 | 00000 |
High-Efficiency Heat Exchangers
Stacked, corrugated plates maximize contact with liquid or steam flowing through these brazed plate heat exchangers for faster heat transfer than shell and tube heat exchangers. Plates are brazed in a vacuum furnace to ensure 100% sealed construction.
Copper-brazed heat exchangers have a Btu/hr. cooling capacity based on cooling water from 120° to 100° F using 70° F water.
ASME BPVC VIII.1 copper-brazed heat exchangers have a Btu/hr. cooling capacity based on cooling 100 SSU oil to 125° F using 85° F water.
Nickel-brazed heat exchangers have a Btu/hr. cooling capacity based on cooling oil from 140° to 120° F using 70° F water.
ASME BPVC VIII.1 heat exchangers meet the ASME Boiler and Pressure Vessel Code (BPVC) for construction of pressure vessels.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Hole | Mounting Stud | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Heating/Cooling Cap., Btu/hr. | Surface Area, sq. ft. | Temp. Range, °F | Pipe Size | Thread Type | Gender | Flow Cap., gpm | Max. Pressure, psi | Ht. | Wd. | Dp. | No. of | Dia. | No. of | Thread Size | Lg. | Each | |
Heat Exchangers | |||||||||||||||||
Copper-Brazed 316 Stainless Steel Plate | |||||||||||||||||
| 69,000 | 2.2 | -320° to 350° | 3/4 | NPT | Male | 7 | 450 | 9 1/8" | 3 1/2" | 2 5/8" | __ | __ | 2 | M8 | 20mm | 00000000 | 0000000 |
| 80,000 | 3 | -320° to 350° | 1 | NPT | Male | 8 | 450 | 13 3/16" | 5" | 1 1/4" | __ | __ | 4 | M10 | 20mm | 00000000 | 000000 |
| 185,000 | 6.8 | -320° to 350° | 1 | NPT | Male | 19 | 450 | 13 3/16" | 5" | 2" | __ | __ | 4 | M10 | 20mm | 00000000 | 000000 |
| 390,000 | 14.3 | -320° to 350° | 1 | NPT | Male | 40 | 450 | 13 3/16" | 5" | 4" | __ | __ | 4 | M10 | 20mm | 00000000 | 000000 |
| 570,000 | 21.9 | -320° to 350° | 1 1/4 | NPT | Male | 58 | 450 | 13 3/16" | 5" | 5 3/4" | __ | __ | 4 | M10 | 20mm | 00000000 | 00000000 |
| 998,000 | 36.8 | -320° to 350° | 2 | NPT | Male | 105 | 300 | 20 5/16" | 9 13/16" | 3.06" | __ | __ | 4 | 1/2"-13 | 1 1/2" | 00000000 | 00000000 |
| 1,710,000 | 63 | -320° to 350° | 2 | NPT | Male | 170 | 300 | 20 5/16" | 9 13/16" | 4.86" | __ | __ | 4 | 1/2"-13 | 1 1/2" | 00000000 | 00000000 |
Nickel-Brazed 316 Stainless Steel Plate | |||||||||||||||||
| 16,000 | 3.1 | -320° to 390° | 1 | NPT | Male | 4 | 360 | 13 3/16" | 4 7/8" | 2 3/16" | __ | __ | 4 | M8 × 1.25 mm | 13/16" | 0000000 | 00000000 |
| 37,000 | 6.8 | -320° to 390° | 1 | NPT | Male | 9 | 360 | 13 3/16" | 4 7/8" | 3 1/16" | __ | __ | 4 | M8 × 1.25 mm | 13/16" | 0000000 | 00000000 |
| 56,000 | 10.6 | -320° to 390° | 1 | NPT | Male | 13 | 360 | 13 3/16" | 4 7/8" | 4" | __ | __ | 4 | M8 × 1.25 mm | 13/16" | 0000000 | 00000000 |
| 74,000 | 14.3 | -320° to 390° | 1 | NPT | Male | 18 | 360 | 13 3/16" | 4 7/8" | 4 7/8" | __ | __ | 4 | M8 × 1.25 mm | 13/16" | 0000000 | 00000000 |
| 120,000 | 40.7 | -320° to 390° | 2 | NPT | Male | 30 | 390 | 20 15/16" | 10 11/16" | 4 1/16" | __ | __ | 4 | M12 × 1.75 mm | 1 13/16" | 0000000 | 00000000 |
ASME BPVC.VIII.1 Heat Exchangers | |||||||||||||||||
Copper-Brazed 316 Stainless Steel Plate | |||||||||||||||||
| 5,000 | 4.8 | -310° to 450° | 3/4 | NPT | Male | 27 | 435 | 8 7/16" | 3 3/16" | 4 7/16" | 2 | 9/32" | __ | __ | __ | 0000000 | 000000 |
| 12,000 | 7.9 | -310° to 450° | 1 | NPT | Male | 29 | 435 | 12 3/16" | 4 3/8" | 4 1/4" | 2 | 13/32" | __ | __ | __ | 0000000 | 000000 |
| 17,000 | 10.7 | -310° to 450° | 1 | NPT | Male | 37 | 435 | 12 3/16" | 4 3/8" | 5 1/4" | 2 | 13/32" | __ | __ | __ | 0000000 | 000000 |
| 50,000 | 15.6 | -310° to 450° | 1 | NPT | Male | 22 | 435 | 20 11/16" | 4 3/8" | 4 1/4" | 2 | 13/32" | __ | __ | __ | 0000000 | 000000 |
| 75,000 | 26.8 | -310° to 450° | 1 | NPT | Male | 34 | 435 | 20 11/16" | 4 3/8" | 6 3/16" | 2 | 13/32" | __ | __ | __ | 0000000 | 00000000 |
| 125,000 | 29.7 | -310° to 450° | 2 | NPT | Male | 57 | 435 | 24 5/16" | 7 1/2" | 5 3/4" | 2 | 1/2" | __ | __ | __ | 0000000 | 00000000 |
| 380,000 | 82.8 | -310° to 450° | 2 | NPT | Male | 141 | 435 | 24 5/16" | 7 1/2" | 11 1/2" | 2 | 1/2" | __ | __ | __ | 0000000 | 00000000 |
Open-Tank Heat Exchangers
Place these heat exchangers in open tanks to heat or cool their contents by transferring heat from water or steam that flows through passageways in the panel. Pipe connections are located above the fluid level, so the heat exchangers can be removed without emptying the tank.
316 stainless steel heat exchangers are more corrosion resistant than steel heat exchangers.
For technical drawings and 3-D models, click on a part number.
Open-Tank Heat Exchangers | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet | Outlet | Optional Hooks | ||||||||||||||||
| Surface Area, sq. ft. | Flow Cap., gpm | Max. Pressure, psi | Min. Temp., °F | Max. Temp., °F | Heat Exchanger Type | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Overall Ht. | Wd. | Panel Ht. | Each | Each | ||
Steel | ||||||||||||||||||
| 3.8 | 9 | 100 | Not Rated | Not Rated | Coil Panel | 3/4 | NPT | Male | 3/4 | NPT | Male | 24" | 24" | 12" | 00000000 | 0000000 | 00000000 | 0000000 |
| 3.8 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 24" | 24" | 12" | 00000000 | 000000 | 00000000 | 000000 |
| 4.8 | 9 | 100 | Not Rated | Not Rated | Coil Panel | 3/4 | NPT | Male | 3/4 | NPT | Male | 24" | 30" | 12" | 00000000 | 000000 | 00000000 | 000000 |
| 5.6 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 30" | 24" | 18" | 00000000 | 00000000 | 00000000 | 000000 |
| 5.8 | 9 | 100 | Not Rated | Not Rated | Coil Panel | 3/4 | NPT | Male | 3/4 | NPT | Male | 24" | 36" | 12" | 00000000 | 000000 | 00000000 | 000000 |
| 5.8 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 24" | 36" | 12" | 00000000 | 000000 | 00000000 | 000000 |
| 7.5 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 36" | 24" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 9.6 | 9 | 100 | Not Rated | Not Rated | Coil Panel | 3/4 | NPT | Male | 3/4 | NPT | Male | 36" | 30" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 9.6 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 36" | 30" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 11.7 | 9 | 100 | Not Rated | Not Rated | Coil Panel | 3/4 | NPT | Male | 3/4 | NPT | Male | 36" | 36" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 11.7 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 36" | 36" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 15.9 | 9 | 100 | Not Rated | Not Rated | Coil Panel | 3/4 | NPT | Male | 3/4 | NPT | Male | 36" | 48" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 15.9 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 36" | 48" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 20.1 | 41 | 100 | Not Rated | Not Rated | Coil Panel | 1 1/2 | NPT | Male | 3/4 | NPT | Male | 36" | 60" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 24.3 | 41 | 100 | Not Rated | Not Rated | Coil Panel | 1 1/2 | NPT | Male | 3/4 | NPT | Male | 36" | 72" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
316 Stainless Steel | ||||||||||||||||||
| 3.8 | 9 | 100 | Not Rated | Not Rated | Coil Panel | 3/4 | NPT | Male | 3/4 | NPT | Male | 24" | 24" | 12" | 00000000 | 000000 | 00000000 | 000000 |
| 3.8 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 24" | 24" | 12" | 00000000 | 000000 | 00000000 | 000000 |
| 4.8 | 9 | 100 | Not Rated | Not Rated | Coil Panel | 3/4 | NPT | Male | 3/4 | NPT | Male | 24" | 30" | 12" | 00000000 | 000000 | 00000000 | 000000 |
| 5.6 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 30" | 24" | 18" | 00000000 | 00000000 | 00000000 | 000000 |
| 5.8 | 9 | 100 | Not Rated | Not Rated | Coil Panel | 3/4 | NPT | Male | 3/4 | NPT | Male | 24" | 36" | 12" | 00000000 | 000000 | 00000000 | 000000 |
| 5.8 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 24" | 36" | 12" | 00000000 | 000000 | 00000000 | 000000 |
| 7.5 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 36" | 24" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 9.6 | 9 | 100 | Not Rated | Not Rated | Coil Panel | 3/4 | NPT | Male | 3/4 | NPT | Male | 36" | 30" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 9.6 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 36" | 30" | 24" | 0000000 | 00000000 | 00000000 | 000000 |
| 11.7 | 9 | 100 | Not Rated | Not Rated | Coil Panel | 3/4 | NPT | Male | 3/4 | NPT | Male | 36" | 36" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 11.7 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 36" | 36" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 15.9 | 9 | 100 | Not Rated | Not Rated | Coil Panel | 3/4 | NPT | Male | 3/4 | NPT | Male | 36" | 48" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 15.9 | 24 | 100 | Not Rated | Not Rated | Coil Panel | 1 | NPT | Male | 3/4 | NPT | Male | 36" | 48" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 20.1 | 41 | 100 | Not Rated | Not Rated | Coil Panel | 1 1/2 | NPT | Male | 3/4 | NPT | Male | 36" | 60" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
| 24.3 | 41 | 100 | Not Rated | Not Rated | Coil Panel | 1 1/2 | NPT | Male | 3/4 | NPT | Male | 36" | 72" | 24" | 00000000 | 00000000 | 00000000 | 000000 |
Heat Exchangers for Sampling
Surface
Area
Surface
Area
Often used to monitor boiler water quality without shutting down the system, these heat exchangers cool hot liquid samples to safe temperatures for testing. Sample liquid flows through the tubes, and cold water from an external water supply flows around the tubes to cool the liquid in the tubes.
304 stainless steel tubes are more corrosion resistant than copper tubes.
316 stainless steel tubes have the best corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Shell-Side | Tube-Side | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Surface Area, sq. ft. | Pipe Size | Thread Type | Gender | Flow Cap., gpm | Max. Pressure, psi | Max. Temp., °F | Pipe Size | Thread Type | Gender | Flow Cap., gpm | Max. Pressure, psi | Max. Temp., °F | Lg. | Head Dia. | Each | |
Steel Shell and Copper Tube | ||||||||||||||||
| 1.3 | 1/4 | NPT | Female | 2 | 150 | 450° | 1/4 | NPT | Female | 4 | 300 | 400° | 17 1/4" | 3 1/2" | 0000000 | 0000000 |
| 1.64 | 1/2 | NPT | Female | Not Rated | 250 | 650° | 1/4 | NPT | Male | Not Rated | 300 | 400° | 19" | 7" | 0000000 | 000000 |
Steel Shell and 304 Stainless Steel Tube | ||||||||||||||||
| 1.64 | 1/2 | NPT | Female | Not Rated | 250 | 650° | 1/4 | NPT | Male | Not Rated | 900 | 750° | 19" | 7" | 0000000 | 000000 |
Steel Shell and 316 Stainless Steel Tube | ||||||||||||||||
| 1.3 | 1/4 | NPT | Female | 2 | 150 | 450° | 1/4 | NPT | Female | 4 | 1,200 | 750° | 17 1/4" | 3 1/2" | 0000000 | 000000 |
| 3.8 | 3/8 | NPT | Female | 2 | 150 | 450° | 1/4 | NPT | Female | 4 | 4,900 | 750° | 32 5/8" | 5" | 0000000 | 00000000 |
Sanitary High-Efficiency Heat Exchangers
Quickly heat or cool beverages and condiments using these heat exchangers, which have a sanitary design certified by 3-A. Also known as plate and frame heat exchangers, they run your product through stacked, corrugated plates and send a liquid of a different temperature in the opposite direction. They’re more efficient than shell and tube heat exchangers because they have a larger surface area for heat transfer. Made of stainless steel, the plates and frame won't rust or corrode from contact with liquids. Oil, water, and salt won’t break down their Buna-N gaskets. The interior gaskets clip onto the plates instead of being glued, so they’re easy to remove for cleaning. Connect these heat exchangers to sanitary quick-clamp fittings using a gasket and a clamp.
Btu/hr. cooling capacity and maximum flow capacity are based on cooling 212˚ F beer wort to 68˚ F using 55˚ F water.
Heat exchangers with mounting feet stand free, or you can mount their frame to the floor using bolt holes in the feet.
Add plates and gaskets to increase heating and cooling capacity or replace existing plates. When replacing your plate, choose one with the same maximum flow capacity. Flow plates have two blocked ports to create extra passes, which makes heat transfer more efficient. Pass plates have four open ports for liquid to flow through.
For technical drawings and 3-D models, click on a part number.
Heat Exchangers | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Holes | Replacement O-Rings | |||||||||||||
| Heating/Cooling Cap., Btu/hr. | Surface Area, sq. ft. | Temp. Range, ° F | For Tube OD | Flange OD | Max. Flow Cap., gpm | Max. Pressure, psi | Ht. | Wd. | Lg. | No. of | Dia. | Each | Each | ||
With Mounting Feet | |||||||||||||||
| 72,500 | 5.1 | -20° to 250° | 1 1/2" | 1.984" | 1 1/2 | 150 | 26" | 7 1/4" | 18 9/16" | 3 | 9/16" | 0000000 | 000000000 | 0000000 | 00000 |
| 145,000 | 9.7 | -20° to 250° | 1 1/2" | 1.984" | 3 | 150 | 26" | 7 1/4" | 18 9/16" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 0000 |
| 224,500 | 14.3 | -20° to 250° | 1 1/2" | 1.984" | 4 | 150 | 26" | 7 1/4" | 18 9/16" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 0000 |
| 311,000 | 18.9 | -20° to 250° | 1 1/2" | 1.984" | 6 | 150 | 26" | 7 1/4" | 22 9/16" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 0000 |
| 398,000 | 23.5 | -20° to 250° | 1 1/2" | 1.984" | 7 | 150 | 26" | 7 1/4" | 22 9/16" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 0000 |
| 521,000 | 28.1 | -20° to 250° | 1 1/2" | 1.984" | 9 1/2 | 150 | 26" | 7 1/4" | 26 9/16" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 0000 |
| 560,000 | 33.2 | -20° to 250° | 1 1/2" | 1.984" | 10 | 150 | 32" | 11" | 17" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 00000 |
| 745,000 | 41.3 | -20° to 250° | 1 1/2" | 1.984" | 13 1/2 | 150 | 32" | 11" | 21" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 00000 |
| 839,000 | 49.4 | -20° to 250° | 1 1/2" | 1.984" | 15 | 150 | 32" | 11" | 21" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 00000 |
| 990,500 | 57.5 | -20° to 250° | 1 1/2" | 1.984" | 18 | 150 | 32" | 11" | 25" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 00000 |
| 1,244,000 | 85.4 | -20° to 250° | 2" | 2.516" | 22 1/2 | 150 | 35 7/8" | 13" | 29" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 0000 |
| 1,489,500 | 99.4 | -20° to 250° | 2" | 2.516" | 27 | 150 | 39 3/16" | 13" | 41" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 0000 |
| 1,681,000 | 113.4 | -20° to 250° | 2" | 2.516" | 30 | 150 | 39 3/16" | 13" | 41" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 0000 |
| 1,865,500 | 127.4 | -20° to 250° | 2" | 2.516" | 33 1/2 | 150 | 39 3/16" | 13" | 41" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 0000 |
| 2,986,000 | 195.7 | -20° to 250° | 2" | 2.516" | 54 | 150 | 49 3/16" | 13" | 41" | 3 | 9/16" | 0000000 | 00000000 | 0000000 | 0000 |
| For Max. Flow Cap., gpm | Ht. | Wd. | Thick. | No. of Top Ports | No. of Bottom Ports | Material | Gasket Material | Gasket Type | Each | |
Flow Plates with Top Ports | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 40 | 20" | 6" | 0.6" | 2 | __ | 316 Stainless Steel | Buna-N Rubber | Clip On | 0000000 | 000000 |
| 100 | 26" | 8" | 0.6" | 2 | __ | 316 Stainless Steel | Buna-N Rubber | Clip On | 0000000 | 00000 |
| 150 | 29 1/2" | 10" | 0.6" | 2 | __ | 316 Stainless Steel | Buna-N Rubber | Clip On | 0000000 | 000000 |
| 200 | 40" | 10" | 0.6" | 2 | __ | 316 Stainless Steel | Buna-N Rubber | Clip On | 0000000 | 000000 |
Flow Plates with Bottom Ports | ||||||||||
| 40 | 20" | 6" | 0.6" | __ | 2 | 316 Stainless Steel | Buna-N Rubber | Clip On | 0000000 | 00000 |
| 100 | 26" | 8" | 0.6" | __ | 2 | 316 Stainless Steel | Buna-N Rubber | Clip On | 0000000 | 00000 |
| 150 | 29 1/2" | 10" | 0.6" | __ | 2 | 316 Stainless Steel | Buna-N Rubber | Clip On | 0000000 | 000000 |
| 200 | 40" | 10" | 0.6" | __ | 2 | 316 Stainless Steel | Buna-N Rubber | Clip On | 0000000 | 000000 |
Pass Plates with Top Ports and Bottom Ports | ||||||||||
| 40 | 20" | 6" | 0.6" | 2 | 2 | 316 Stainless Steel | Buna-N Rubber | Clip On | 0000000 | 00000 |
| 100 | 26" | 8" | 0.6" | 2 | 2 | 316 Stainless Steel | Buna-N Rubber | Clip On | 0000000 | 00000 |
| 150 | 29 1/2" | 10" | 0.6" | 2 | 2 | 316 Stainless Steel | Buna-N Rubber | Clip On | 0000000 | 000000 |
| 200 | 40" | 10" | 0.6" | 2 | 2 | 316 Stainless Steel | Buna-N Rubber | Clip On | 0000000 | 000000 |
| For Max. Flow Cap., gpm | Ht. | Wd. | Thick. | Material | Each | |
Clip On | ||||||
|---|---|---|---|---|---|---|
| 40 | 20" | 6" | 0.3" | Buna-N Rubber | 0000000 | 000000 |
| 100 | 26" | 8" | 0.3" | Buna-N Rubber | 0000000 | 00000 |
| 150 | 29 1/2" | 10" | 0.3" | Buna-N Rubber | 0000000 | 00000 |
| 200 | 40" | 10" | 0.3" | Buna-N Rubber | 0000000 | 00000 |
Glue On | ||||||
| 40 | 20" | 6" | 0.3" | Buna-N Rubber | 0000000 | 00000 |
| 100 | 26" | 8" | 0.3" | Buna-N Rubber | 0000000 | 00000 |
| 150 | 29 1/2" | 10" | 0.3" | Buna-N Rubber | 0000000 | 00000 |
| 200 | 40" | 10" | 0.3" | Buna-N Rubber | 0000000 | 00000 |
Heat Exchangers
Also known as shell and tube heat exchangers, these transfer heat using liquid or steam that flows through the shell to heat or cool liquid in the tubes. They’re commonly used in refrigeration and engine cooling systems. Btu/hr. cooling capacity is based on cooling 180° F process water with 85° F water and a 10 psi pressure difference.
Heat exchangers with a 316 stainless steel shell and tubes are the most corrosion resistant.
Heat exchangers with baffled tubes direct liquid to make four passes through the tubes for more efficient heat transfer than other heat exchangers.
ASME BPVC VIII.1 heat exchangers meet the ASME Boiler and Pressure Vessel Code (BPVC) for construction of pressure vessels.
For technical drawings and 3-D models, click on a part number.
Shell-Side | Tube-Side | Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Heating/Cooling Cap., Btu/hr. | Surface Area, sq. ft. | No. of Passes | Min. Temp., °F | Max. Temp., °F | Pipe Size | Flow Cap., gpm | Max. Pressure, psi | Pipe Size | Flow Cap., gpm | Max. Pressure, psi | Lg. | Head Dia. | Each | |
Brass Shell and Baffled Copper Tube | ||||||||||||||
| 130,000 | 2.4 | 4 | -20° | 300° | 1 | 24 | 300 | 3/4 | 12 | 150 | 10 7/8" | 4 3/16" | 00000000 | 0000000 |
| 195,000 | 4.3 | 4 | -20° | 300° | 1 | 24 | 300 | 3/4 | 12 | 150 | 16 7/8" | 4 3/16" | 00000000 | 000000 |
| 280,000 | 7.4 | 4 | -20° | 300° | 1 | 24 | 300 | 3/4 | 12 | 150 | 26 7/8" | 4 3/16" | 00000000 | 00000000 |
| 350,000 | 9.1 | 4 | -20° | 300° | 1 1/2 | 60 | 300 | 1 | 30 | 150 | 18 1/8" | 6 1/2" | 00000000 | 00000000 |
| 560,000 | 15.7 | 4 | -20° | 300° | 1 1/2 | 60 | 300 | 1 | 30 | 150 | 28 1/8" | 6 1/2" | 00000000 | 00000000 |
| 890,000 | 23 | 4 | -20° | 300° | 2 | 73 | 300 | 1 1/2 | 57 | 150 | 29" | 7 1/2" | 00000000 | 00000000 |
| 1,115,000 | 34 | 4 | -20° | 300° | 2 | 73 | 300 | 1 1/2 | 57 | 150 | 41" | 7 1/2" | 00000000 | 00000000 |
| 1,585,000 | 41 | 4 | -20° | 300° | 3 | 140 | 300 | 2 | 104 | 150 | 30 3/8" | 9 3/4" | 00000000 | 00000000 |
| 2,000,000 | 62 | 4 | -20° | 300° | 3 | 140 | 300 | 2 | 105 | 150 | 42 3/8" | 9 3/4" | 00000000 | 00000000 |
Steel Shell and Baffled Copper Tube | ||||||||||||||
| 195,000 | 4.3 | 4 | -20° | 300° | 1 | 22 | 300 | 3/4 | 12 | 150 | 17" | 4 1/2" | 0000000 | 00000000 |
| 280,000 | 7.4 | 4 | -20° | 300° | 1 | 30 | 300 | 3/4 | 12 | 150 | 27" | 4 1/2" | 0000000 | 00000000 |
| 350,000 | 9.1 | 4 | -20° | 300° | 1 1/2 | 32 | 300 | 1 | 30 | 150 | 18 11/16" | 6 3/4" | 0000000 | 00000000 |
| 560,000 | 15.7 | 4 | -20° | 300° | 1 1/2 | 43 | 300 | 1 | 30 | 150 | 28 11/16" | 6 3/4" | 0000000 | 00000000 |
| 890,000 | 23 | 4 | -20° | 300° | 2 | 51 | 300 | 1 1/2 | 57 | 150 | 29" | 7 3/4" | 0000000 | 00000000 |
| 1,115,000 | 34 | 4 | -20° | 300° | 2 | 103 | 300 | 1 1/2 | 57 | 150 | 41" | 7 3/4" | 0000000 | 00000000 |
| 1,585,000 | 41 | 4 | -20° | 300° | 3 | 103 | 300 | 2 | 104 | 150 | 30 1/2" | 10 1/2" | 0000000 | 00000000 |
| 2,000,000 | 62 | 4 | -20° | 300° | 3 | 103 | 300 | 2 | 105 | 150 | 42 1/2" | 10 1/2" | 0000000 | 00000000 |
Steel Shell and Copper Tube | ||||||||||||||
| Not Rated | 15 | 2 | Not Rated | 400° | 2 1/2 (Inlet); 1 1/4 (Outlet) | 38 | 100 | 1 1/4 | 38 | 100 | 28 5/8" | 6" | 0000000 | 00000000 |
316 Stainless Steel Shell and Baffled 316 Stainless Steel Tube | ||||||||||||||
| 130,000 | 2.4 | 4 | -20° | 450° | 1 | 32 | 225 | 3/4 | 12 | 150 | 10 3/8" | 4 3/16" | 00000000 | 00000000 |
| 195,000 | 4.3 | 4 | -20° | 450° | 1 | 32 | 225 | 3/4 | 12 | 150 | 16 3/8" | 4 3/16" | 00000000 | 00000000 |
| 280,000 | 7.4 | 4 | -20° | 450° | 1 | 32 | 225 | 3/4 | 12 | 150 | 26 3/8" | 4 3/16" | 00000000 | 00000000 |
| 350,000 | 9.1 | 4 | -20° | 450° | 1 1/2 | 76 | 225 | 1 | 30 | 150 | 17 13/16" | 6 1/2" | 00000000 | 00000000 |
| 560,000 | 15.7 | 4 | -20° | 450° | 1 1/2 | 76 | 225 | 1 | 30 | 150 | 27 13/16" | 6 1/2" | 00000000 | 00000000 |
| 890,000 | 23 | 4 | -20° | 450° | 2 | 126 | 225 | 1 1/2 | 57 | 150 | 28 1/8" | 7 1/2" | 00000000 | 00000000 |
| 1,115,000 | 34 | 4 | -20° | 450° | 2 | 126 | 225 | 1 1/2 | 57 | 150 | 40 1/8" | 7 1/2" | 00000000 | 00000000 |
| 1,585,000 | 41 | 4 | -20° | 450° | 3 | 220 | 225 | 2 | 104 | 150 | 28" | 9 3/4" | 00000000 | 00000000 |
| 2,000,000 | 62 | 4 | -20° | 450° | 3 | 220 | 225 | 2 | 105 | 150 | 40" | 9 3/4" | 00000000 | 00000000 |
Shell-Side | Tube-Side | Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Heating/Cooling Cap., Btu/hr. | Surface Area, sq. ft. | No. of Passes | Min. Temp., °F | Max. Temp., °F | Pipe Size | Flow Cap., gpm | Max. Pressure, psi | Pipe Size | Flow Cap., gpm | Max. Pressure, psi | Lg. | Head Dia. | Each | |
| 150,000 | 4.5 | 2 | -20° | 375° | 2 (Inlet); 1 (Outlet) | 44 | 150 | 1 1/2 | 44 | 150 | 28 1/2" | 7 1/4" | 0000000 | 000000000 |
| 420,000 | 6.8 | 2 | -20° | 375° | 2 (Inlet); 1 (Outlet) | 44 | 150 | 1 1/2 | 44 | 150 | 40 1/2" | 7 1/4" | 0000000 | 00000000 |
| 720,000 | 9.2 | 2 | -20° | 375° | 3 (Inlet); 1 (Outlet) | 44 | 150 | 1 1/2 | 44 | 150 | 52 1/2" | 7 1/4" | 0000000 | 00000000 |
| 1,350,000 | 17.4 | 2 | -20° | 375° | 2 1/2 (Inlet); 1 (Outlet) | 175 | 150 | 2 | 175 | 150 | 53 1/4" | 10 1/2" | 0000000 | 00000000 |
Shell-Side | Tube-Side | Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Heating/Cooling Cap. | Surface Area, sq. ft. | No. of Passes | Max. Temp., °F | Pipe Size | Flow Cap., gpm | Max. Pressure, psi | Pipe Size | Flow Cap., gpm | Max. Pressure, psi | Lg. | Head Dia. | Each | |
| Not Rated | 21.5 | 2 | 400° | 4 (Inlet); 1 1/2 (Outlet) | 100 | 100 | 2 | 100 | 100 | 27 3/4" | 8 1/8" | 0000000 | 000000000 |
| Not Rated | 30.2 | 2 | 400° | 4 (Inlet); 1 1/2 (Outlet) | 100 | 100 | 2 | 100 | 100 | 39 3/4" | 8 1/8" | 0000000 | 00000000 |
| Not Rated | 38.8 | 2 | 400° | 4 (Inlet); 1 1/2 (Outlet) | 100 | 100 | 2 | 100 | 100 | 51 3/4" | 8 1/8" | 0000000 | 00000000 |
| Not Rated | 72.4 | 2 | 400° | 6 (Inlet); 2 (Outlet) | 180 | 100 | 2 1/2 | 180 | 100 | 53" | 10 1/8" | 0000000 | 00000000 |
High-Pressure Heat Exchangers
With more than three times the pressure rating of standard heat exchangers, these are often used for high-pressure condensing, evaporating, heating, and cooling. Also known as shell and tube heat exchangers, they transfer heat using liquid or steam that flows through the shell to heat or cool liquid in the tubes. Btu/hr. cooling capacity is based on cooling 180° F process water with 85° F water and a 10 psi pressure difference. Shell and tubes are 316 stainless steel for excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Shell-Side | Tube-Side | Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Heating/Cooling Cap., Btu/hr. | Surface Area, sq. ft. | Max. Pressure for Steam, psi | Temp. Range, °F | Pipe Size | Thread Type | Gender | Flow Cap., gpm | Max. Pressure, psi | Pipe Size | Thread Type | Gender | Flow Cap., gpm | Max. Pressure, psi | Lg. | Head Dia. | Each | |
316 Stainless Steel Shell and 316 Stainless Steel Tube | |||||||||||||||||
| 59,000 | 0.4 | 125 | -320° to 800° | 1/4 | NPT | Female | 4.8 | 1,000 | 3/8 | NPT | Female | 10.9 | 1,500 | 9 3/4" | 1 1/8" | 0000000 | 000000000 |
| 65,500 | 0.61 | 125 | -320° to 800° | 1/4 | NPT | Female | 4.4 | 1,000 | 3/8 | NPT | Female | 9.3 | 1,500 | 13 3/4" | 1 1/8" | 0000000 | 00000000 |
| 74,000 | 0.81 | 125 | -320° to 800° | 1/4 | NPT | Female | 4.2 | 1,000 | 3/8 | NPT | Female | 8.2 | 1,500 | 17 3/4" | 1 1/8" | 0000000 | 00000000 |
| 76,500 | 0.58 | 125 | -320° to 800° | 1/4 | NPT | Female | 4.8 | 1,000 | 3/8 | NPT | Female | 10.1 | 1,500 | 9 3/4" | 1 1/8" | 0000000 | 00000000 |
| 90,000 | 0.89 | 125 | -320° to 800° | 1/4 | NPT | Female | 4.4 | 1,000 | 3/8 | NPT | Female | 8.4 | 1,500 | 13 3/4" | 1 1/8" | 0000000 | 00000000 |
| 98,000 | 1.19 | 125 | -320° to 800° | 1/4 | NPT | Female | 4.2 | 1,000 | 3/8 | NPT | Female | 7.3 | 1,500 | 17 3/4" | 1 1/8" | 0000000 | 00000000 |
Enclosure-Cooling Heat Exchangers
Cool the air in your enclosure to protect electronic components from excessive heat. These heat exchangers absorb heat in the enclosure, then use cooler air outside the enclosure to draw the heat away, lowering the temperature inside. Unlike a fan, they seal out outside air, so dust, moisture, and other contaminants can't get in. Because they use ambient air to cool the enclosure, heat exchangers use less energy and are less likely to cause condensation than air conditioners.
Heat exchangers that meet NEMA 12 and IP54 seal out dust, dirt, and splashing water and oil. Made of steel, these enclosures are powder coated, so they won’t rust in damp environments, but they’re not watertight enough to use outdoors.
NEMA 4- and IP56-rated heat exchangers are designed to withstand rain, snow, and washdowns. They’re made of powder-coated steel.
Heat exchangers rated NEMA 4X and IP56 are made of stainless steel to resist corrosion in the harshest environments. They stand up to weather, washdowns, and corrosive chemicals.
All of these heat exchangers meet American and Canadian safety standards. CE marked heat exchangers also meet European safety standards.
For technical drawings and 3-D models, click on a part number.
Overall | For Opening | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cooling Capacity, Btu/hr. | Airflow, cfm | Wattage, W | Current, A | Height | Width | Depth | Height | Width | Material | Thermostat Included | For Use Outdoors | Mounting Fasteners Included | Specifications Met | Each | |
NEMA 12, IP54 | |||||||||||||||
120V AC, Single Phase, 60Hz—Screw Terminals | |||||||||||||||
| 4,400 | 180 | 75 | 0.9 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | No | Yes | UL Listed C-UL Listed | 0000000 | 000000000 |
| 6,800 | 180 | 75 | 0.9 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | No | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 10,200 | 560 | 345 | 2.8 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | No | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 12,200 | 560 | 345 | 2.8 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | No | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
230V AC, Single Phase, 50Hz/60Hz—Screw Terminals | |||||||||||||||
| 4,400 | 180 | 75 | 0.4 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | No | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 6,800 | 180 | 75 | 0.4 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | No | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 10,200 | 560 | 245 | 1.4 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | No | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 12,200 | 560 | 245 | 1.4 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | No | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
460V AC, Single Phase, 50Hz/60Hz—Screw Terminals | |||||||||||||||
| 4,400 | 180 | 75 | 0.2 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | No | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 6,800 | 180 | 75 | 0.2 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | No | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 10,200 | 560 | 245 | 0.7 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | No | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 12,200 | 560 | 245 | 0.7 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | No | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
NEMA 4, IP56 | |||||||||||||||
120V AC, Single Phase, 60Hz—Screw Terminals | |||||||||||||||
| 4,400 | 180 | 75 | 0.9 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 6,800 | 180 | 75 | 0.9 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 10,200 | 560 | 345 | 2.8 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 12,200 | 560 | 345 | 2.8 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
230V AC, Single Phase, 50Hz/60Hz—Screw Terminals | |||||||||||||||
| 4,400 | 180 | 75 | 0.4 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 6,800 | 180 | 75 | 0.4 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 10,200 | 560 | 245 | 1.4 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 12,200 | 560 | 245 | 1.4 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
460V AC, Single Phase, 50Hz/60Hz—Screw Terminals | |||||||||||||||
| 4,400 | 180 | 75 | 0.2 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 6,800 | 180 | 75 | 0.2 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 10,200 | 560 | 245 | 0.7 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 12,200 | 560 | 245 | 0.7 | 35" | 12" | 11" | 17" | 10" | Powder-Coated Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
NEMA 4X, IP56 | |||||||||||||||
120V AC, Single Phase, 50Hz/60Hz—Three-Prong Plug | |||||||||||||||
| 1,400 | Not Rated | 80 | 0.7 | 12" | 12" | 8" | 11" | 11" | Stainless Steel | No | Yes | Yes | UL Listed C-UL Listed CE Marked | 0000000 | 00000000 |
| 3,000 | Not Rated | 160 | 1.4 | 23" | 12" | 8" | 21 3/4" | 11" | Stainless Steel | No | Yes | Yes | UL Listed C-UL Listed CE Marked | 0000000 | 00000000 |
120V AC, Single Phase, 60Hz—Screw Terminals | |||||||||||||||
| 4,400 | 180 | 75 | 0.9 | 35" | 12" | 11" | 17" | 10" | Stainless Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 6,800 | 180 | 75 | 0.9 | 35" | 12" | 11" | 17" | 10" | Stainless Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 10,200 | 560 | 345 | 2.8 | 35" | 12" | 11" | 17" | 10" | Stainless Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 12,200 | 560 | 345 | 2.8 | 35" | 12" | 11" | 17" | 10" | Stainless Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
230V AC, Single Phase, 50Hz/60Hz—Screw Terminals | |||||||||||||||
| 4,400 | 180 | 75 | 0.4 | 35" | 12" | 11" | 17" | 10" | Stainless Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 6,800 | 180 | 75 | 0.4 | 35" | 12" | 11" | 17" | 10" | Stainless Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 10,200 | 560 | 245 | 1.4 | 35" | 12" | 11" | 17" | 10" | Stainless Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 12,200 | 560 | 245 | 1.4 | 35" | 12" | 11" | 17" | 10" | Stainless Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
460V AC, Single Phase, 50Hz/60Hz—Screw Terminals | |||||||||||||||
| 4,400 | 180 | 75 | 0.2 | 35" | 12" | 11" | 17" | 10" | Stainless Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 6,800 | 180 | 75 | 0.2 | 35" | 12" | 11" | 17" | 10" | Stainless Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 10,200 | 560 | 245 | 0.7 | 35" | 12" | 11" | 17" | 10" | Stainless Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |
| 12,200 | 560 | 245 | 0.7 | 35" | 12" | 11" | 17" | 10" | Stainless Steel | Yes | Yes | Yes | UL Listed C-UL Listed | 0000000 | 00000000 |