McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    366 Products

    Performance

    For Shaft Type

    Sold As

    Wide-Rim Shims

    Image of Product. Front orientation. Shims. Wide Rim, Round, Sold Individually.
    Spread loads across a wider surface area than standard shims to minimize costly wear between components. With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these shims won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Carbon Steel—Best for dry environments since moisture will cause these shims to rust.
    Zinc-Plated Carbon Steel—A common choice for areas with occasional exposure to moisture.
    Thk.
    Thk. Tolerance
    ID Tolerance
    OD Tolerance
    Min.
    Hardness
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    1/2" ID × 7/8" OD
    0.048"-0.007" to 0.007"-0.01" to 0.01"-0.005" to 0.025"Rockwell B205000000000000000
    0.075"-0.007" to 0.007"-0.01" to 0.01"-0.005" to 0.025"Rockwell B20500000000000000
     
    9/16" ID × 1" OD
    0.048"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
     
    5/8" ID × 1 1/4" OD
    0.048"-0.007" to 0.007"-0.01" to 0.01"-0.005" to 0.025"Rockwell B20500000000000000
    0.075"-0.007" to 0.007"-0.01" to 0.01"-0.005" to 0.025"Rockwell B20500000000000000
     
    3/4" ID × 1 1/4" OD
    0.048"-0.007" to 0.007"-0.01" to 0.01"-0.005" to 0.025"Rockwell B20500000000000000
    0.075"-0.007" to 0.007"-0.01" to 0.01"-0.005" to 0.025"Rockwell B20500000000000000
    0.134"-0.007" to 0.007"0" to 0.011"-0.01" to 0.01"Rockwell B2010000000000000
     
    3/4" ID × 1 1/2" OD
    0.048"-0.007" to 0.007"-0.01" to 0.01"-0.005" to 0.025"Rockwell B20500000000000000
    0.075"-0.007" to 0.007"-0.01" to 0.01"-0.005" to 0.025"Rockwell B2010000000000000
    0.134"-0.007" to 0.007"0" to 0.011"-0.01" to 0.01"Rockwell B2010000000000000
     
    7/8" ID × 1 3/8" OD
    0.134"-0.009" to 0.009"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    1" ID × 1 1/2" OD
    0.048"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.134"-0.009" to 0.009"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    1" ID × 2" OD
    0.048"-0.007" to 0.007"-0.01" to 0.01"-0.005" to 0.025"Rockwell B2010000000000000
    0.075"-0.007" to 0.007"-0.01" to 0.01"-0.005" to 0.025"Rockwell B2010000000000000
    0.134"-0.007" to 0.007"0" to 0.011"-0.01" to 0.01"Rockwell B2010000000000000
     
    1 1/8" ID × 1 3/4" OD
    0.125"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    1 1/4" ID × 1 7/8" OD
    0.075"-0.007" to 0.007"-0.01" to 0.01"-0.005" to 0.025"Rockwell B2010000000000000
    0.125"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.134"-0.007" to 0.007"0" to 0.011"-0.01" to 0.01"Rockwell B2010000000000000
     
    1 3/8" ID × 2 1/8" OD
    0.125"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    1 1/2" ID × 2 1/4" OD
    0.075"-0.007" to 0.007"-0.01" to 0.01"-0.005" to 0.025"Rockwell B2010000000000000
    0.125"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.134"-0.007" to 0.007"0" to 0.011"-0.01" to 0.01"Rockwell B20100000000000000
     
    1 1/2" ID × 3" OD
    0.134"-0.009" to 0.009"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
     
    2" ID × 3" OD
    0.125"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.134"-0.009" to 0.009"0" to 0.011"-0.01" to 0.01"Rockwell B20100000000000000
     
    2 1/2" ID × 3 1/2" OD
    0.134"-0.009" to 0.009"0" to 0.011"-0.01" to 0.01"Rockwell B20100000000000000
     
    3" ID × 4 1/4" OD
    0.134"-0.009" to 0.009"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
     
    1/2" ID × 7/8" OD
    0.048"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
     
    5/8" ID × 1 1/4" OD
    0.048"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
     
    3/4" ID × 1 1/2" OD
    0.048"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
     
    1" ID × 2" OD
    0.048"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
     
    Carbon Steel
     
    1/4" ID × 5/8" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
     
    3/8" ID × 3/4" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
     
    1/2" ID × 7/8" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
     
    9/16" ID × 1" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
     
    5/8" ID × 1" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
     
    5/8" ID × 1 1/4" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
     
    3/4" ID × 1 1/4" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
     
    3/4" ID × 1 1/2" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
     
    7/8" ID × 1 3/8" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
     
    7/8" ID × 1 3/4" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
     
    1" ID × 1 1/2" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
     
    1" ID × 2" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
     
    1 1/8" ID × 1 3/4" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.06"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.125"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.25"-0.012" to 0.012"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    1 1/4" ID × 1 7/8" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.125"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.25"-0.012" to 0.012"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    1 1/4" ID × 2 1/4" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
     
    1 3/8" ID × 2 1/8" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.06"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.125"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.25"-0.012" to 0.012"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    1 3/8" ID × 2 1/2" OD
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B38500000000000000
     
    1 1/2" ID × 2 1/4" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.125"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B381000000000000000
    0.25"-0.012" to 0.012"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    1 1/2" ID × 3" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38500000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B38500000000000000
     
    1 5/8" ID × 2 3/8" OD
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B381000000000000000
     
    1 3/4" ID × 2 1/2" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
     
    1 3/4" ID × 3 1/4" OD
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    2" ID × 3" OD
    0.06"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B381000000000000000
    0.125"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B381000000000000000
    0.187"-0.017" to 0.003"0.01" to 0.025"-0.01" to 0.01"Not Rated10000000000000
     
    2" ID × 3 1/2" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38500000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    2 1/2" ID × 3 1/2" OD
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B38500000000000000
    0.187"-0.017" to 0.003"0.01" to 0.025"-0.01" to 0.01"Not Rated10000000000000
     
    2 1/2" ID × 3 7/8" OD
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    2 3/4" ID × 3 3/4" OD
    0.187"-0.017" to 0.003"0.01" to 0.025"-0.01" to 0.01"Not Rated10000000000000
     
    3" ID × 4" OD
    0.187"-0.017" to 0.003"0.01" to 0.025"-0.01" to 0.01"Not Rated10000000000000
     
    3" ID × 4 1/4" OD
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38500000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    Zinc-Plated Carbon Steel
     
    1/4" ID × 5/8" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
     
    3/8" ID × 3/4" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
     
    1/2" ID × 7/8" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
     
    9/16" ID × 1" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
     
    5/8" ID × 1" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
     
    5/8" ID × 1 1/4" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
     
    3/4" ID × 1 1/4" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
     
    3/4" ID × 1 1/2" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
     
    7/8" ID × 1 3/8" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
     
    1" ID × 1 1/2" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
     
    1" ID × 2" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
     
    1 1/8" ID × 1 3/4" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B382500000000000000
     
    1 1/4" ID × 1 7/8" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38250000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
     
    1 1/4" ID × 2 1/4" OD
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
     
    1 3/8" ID × 2 1/8" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
     
    1 3/8" ID × 2 1/2" OD
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    1 1/2" ID × 2 1/4" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
     
    1 1/2" ID × 3" OD
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    1 5/8" ID × 2 3/8" OD
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
     
    1 3/4" ID × 2 1/2" OD
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B38100000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
     
    2" ID × 3" OD
    0.048"-0.006" to 0.006"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3850000000000000
    0.187"-0.017" to 0.003"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    2" ID × 3 1/2" OD
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    2 1/2" ID × 3 1/2" OD
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.187"-0.017" to 0.003"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    2 1/2" ID × 3 7/8" OD
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    2 3/4" ID × 3 3/4" OD
    0.187"-0.017" to 0.003"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    3" ID × 4" OD
    0.187"-0.017" to 0.003"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     
    3" ID × 4 1/4" OD
    0.075"-0.007" to 0.007"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
    0.134"-0.008" to 0.008"0.01" to 0.025"-0.01" to 0.01"Rockwell B3810000000000000
     

    Shims for Keyed Shafts

    With a notch or tab, these shims fit snugly on keyed shafts to align and space gears, sprockets, and bearings. On keyed arbors, they’re often used to accurately space saw blades and cutters.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    Notch
    Image of Product. Front orientation. Shims. For Keyed Shafts, Sold Individually, Round, Notch.
    Fit these shims around keyed shafts and arbors that have a key inserted. They’re often referred to as arbor spacers.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Carbon Steel—Best for dry environments since moisture will cause these shims to rust.
    Notch
    Thk.
    Thk. Tolerance
    ID
    ID
    Tolerance
    OD
    OD Tolerance
    Wd.
    Dp.
    Min.
    Hardness
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    For 1/2" Diameter Shafts
    0.001"-0.0001" to 0.0001"1/2"0" to 0.011"3/4"-0.002" to 0.002"1/8"3/64"Rockwell B8010000000000000000
    0.002"-0.0002" to 0.0002"1/2"0" to 0.011"3/4"-0.002" to 0.002"1/8"3/64"Rockwell B801000000000000000
    0.003"-0.0003" to 0.0003"1/2"0" to 0.011"3/4"-0.002" to 0.002"1/8"3/64"Rockwell B801000000000000000
    0.004"-0.0004" to 0.0004"1/2"0" to 0.011"3/4"-0.002" to 0.002"1/8"3/64"Rockwell B801000000000000000
    0.005"-0.0005" to 0.0005"1/2"0" to 0.011"3/4"-0.002" to 0.002"1/8"3/64"Rockwell B801000000000000000
    0.006"-0.0006" to 0.0006"1/2"0" to 0.011"3/4"-0.002" to 0.002"1/8"3/64"Rockwell B801000000000000000
     
    For 3/4" Diameter Shafts
    0.001"-0.0001" to 0.0001"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.002"-0.0002" to 0.0002"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B80100000000000000
    0.003"-0.0003" to 0.0003"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B80100000000000000
    0.004"-0.0004" to 0.0004"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.005"-0.0005" to 0.0005"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.006"-0.0006" to 0.0006"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.007"-0.0007" to 0.0007"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.008"-0.0008" to 0.0008"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.01"-0.001" to 0.001"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.012"-0.002" to 0.002"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.015"-0.002" to 0.002"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.02"-0.0025" to 0.0025"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
     
    For 7/8" Diameter Shafts
    0.002"-0.0002" to 0.0002"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.003"-0.0003" to 0.0003"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.004"-0.0004" to 0.0004"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.005"-0.0005" to 0.0005"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.006"-0.0006" to 0.0006"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.007"-0.0007" to 0.0007"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.008"-0.0008" to 0.0008"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.01"-0.001" to 0.001"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.012"-0.002" to 0.002"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.015"-0.002" to 0.002"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
    0.02"-0.0025" to 0.0025"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B801000000000000000
     
    For 1" Diameter Shafts
    0.002"-0.0002" to 0.0002"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801000000000000000
    0.003"-0.0003" to 0.0003"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B80100000000000000
    0.004"-0.0004" to 0.0004"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801000000000000000
    0.005"-0.0005" to 0.0005"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801000000000000000
    0.006"-0.0006" to 0.0006"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801000000000000000
    0.007"-0.0007" to 0.0007"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801000000000000000
    0.008"-0.0008" to 0.0008"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801000000000000000
    0.01"-0.001" to 0.001"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801000000000000000
    0.012"-0.002" to 0.002"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801000000000000000
    0.015"-0.002" to 0.002"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801000000000000000
    0.02"-0.0025" to 0.0025"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801000000000000000
    0.024"-0.0025" to 0.0025"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801000000000000000
    0.03"-0.003" to 0.003"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801000000000000000
    0.048"-0.0035" to 0.0035"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B80500000000000000
    0.06"-0.0035" to 0.0035"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B80500000000000000
    0.09"-0.005" to 0.005"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B80500000000000000
    0.125"-0.005" to 0.005"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B80500000000000000
     
    For 1 1/4" Diameter Shafts
    0.002"-0.0002" to 0.0002"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B801000000000000000
    0.003"-0.0003" to 0.0003"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B8050000000000000
    0.004"-0.0004" to 0.0004"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B801000000000000000
    0.005"-0.0005" to 0.0005"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B801000000000000000
    0.006"-0.0006" to 0.0006"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B8050000000000000
    0.007"-0.0007" to 0.0007"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B8050000000000000
    0.008"-0.0008" to 0.0008"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B8050000000000000
    0.01"-0.001" to 0.001"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B80500000000000000
    0.012"-0.002" to 0.002"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B8050000000000000
    0.015"-0.002" to 0.002"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B801000000000000000
    0.02"-0.0025" to 0.0025"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B801000000000000000
    0.024"-0.0025" to 0.0025"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B80500000000000000
    0.03"-0.003" to 0.003"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B8050000000000000
    0.048"-0.0035" to 0.0035"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B80500000000000000
    0.06"-0.0035" to 0.0035"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B80500000000000000
    0.09"-0.005" to 0.005"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B8010000000000000
     
    For 1 1/2" Diameter Shafts
    0.002"-0.0002" to 0.0002"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B8050000000000000
    0.003"-0.0003" to 0.0003"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B8050000000000000
    0.004"-0.0004" to 0.0004"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B8050000000000000
    0.005"-0.0005" to 0.0005"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80500000000000000
    0.006"-0.0006" to 0.0006"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80500000000000000
    0.007"-0.0007" to 0.0007"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80500000000000000
    0.008"-0.0008" to 0.0008"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80500000000000000
    0.01"-0.001" to 0.001"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80500000000000000
    0.012"-0.002" to 0.002"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80500000000000000
    0.015"-0.002" to 0.002"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80500000000000000
    0.02"-0.0025" to 0.0025"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80500000000000000
    0.024"-0.0025" to 0.0025"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80500000000000000
    0.03"-0.003" to 0.003"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80500000000000000
    0.048"-0.0035" to 0.0035"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80500000000000000
    0.06"-0.0035" to 0.0035"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80500000000000000
    0.09"-0.005" to 0.005"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B8010000000000000
     
    For 2" Diameter Shafts
    0.002"-0.0002" to 0.0002"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8050000000000000
    0.003"-0.0003" to 0.0003"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8010000000000000
    0.004"-0.0004" to 0.0004"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B80500000000000000
    0.005"-0.0005" to 0.0005"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B80500000000000000
    0.006"-0.0006" to 0.0006"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B80500000000000000
    0.007"-0.0007" to 0.0007"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B80500000000000000
    0.008"-0.0008" to 0.0008"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8010000000000000
    0.01"-0.001" to 0.001"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B80500000000000000
    0.012"-0.002" to 0.002"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B80500000000000000
    0.015"-0.002" to 0.002"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B80500000000000000
    0.02"-0.0025" to 0.0025"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B80500000000000000
    0.024"-0.0025" to 0.0025"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8010000000000000
    0.03"-0.003" to 0.003"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B80500000000000000
    0.048"-0.0035" to 0.0035"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B80500000000000000
    0.06"-0.0035" to 0.0035"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8010000000000000
    0.09"-0.005" to 0.005"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8010000000000000
     
    Carbon Steel
     
    For 1/2" Diameter Shafts
    0.01"-0.00075" to 0.00075"1/2"0" to 0.011"3/4"-0.002" to 0.002"1/8"3/64"Rockwell B8410000000000000
    0.015"-0.001" to 0.001"1/2"0" to 0.011"3/4"-0.002" to 0.002"1/8"3/64"Rockwell B8410000000000000
    0.02"-0.001" to 0.001"1/2"0" to 0.011"3/4"-0.002" to 0.002"1/8"3/64"Rockwell B8410000000000000
     
    For 5/8" Diameter Shafts
    0.001"-0.0001" to 0.0001"5/8"0" to 0.011"1"-0.002" to 0.002"3/16"1/16"Rockwell B8410000000000000
    0.002"-0.0002" to 0.0002"5/8"0" to 0.011"1"-0.002" to 0.002"3/16"1/16"Rockwell B8410000000000000
    0.003"-0.0003" to 0.0003"5/8"0" to 0.011"1"-0.002" to 0.002"3/16"1/16"Rockwell B8410000000000000
    0.005"-0.0005" to 0.0005"5/8"0" to 0.011"1"-0.002" to 0.002"3/16"1/16"Rockwell B8410000000000000
    0.01"-0.00075" to 0.00075"5/8"0" to 0.011"1"-0.002" to 0.002"3/16"1/16"Rockwell B8410000000000000
    0.015"-0.001" to 0.001"5/8"0" to 0.011"1"-0.002" to 0.002"3/16"1/16"Rockwell B8410000000000000
    0.02"-0.001" to 0.001"5/8"0" to 0.011"1"-0.002" to 0.002"3/16"1/16"Rockwell B8410000000000000
     
    For 3/4" Diameter Shafts
    0.001"-0.0001" to 0.0001"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B84100000000000000
    0.002"-0.0002" to 0.0002"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B84100000000000000
    0.003"-0.0003" to 0.0003"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B84100000000000000
    0.005"-0.0005" to 0.0005"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B8410000000000000
    0.01"-0.00075" to 0.00075"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B8410000000000000
    0.015"-0.001" to 0.001"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B8410000000000000
    0.02"-0.001" to 0.001"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B8410000000000000
     
    For 7/8" Diameter Shafts
    0.001"-0.0001" to 0.0001"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B84100000000000000
    0.002"-0.0002" to 0.0002"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B84100000000000000
    0.003"-0.0003" to 0.0003"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B84100000000000000
    0.005"-0.0005" to 0.0005"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B8410000000000000
    0.01"-0.00075" to 0.00075"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B8410000000000000
    0.015"-0.001" to 0.001"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B8410000000000000
    0.02"-0.001" to 0.001"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B84100000000000000
     
    For 1" Diameter Shafts
    0.001"-0.0001" to 0.0001"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B84100000000000000
    0.002"-0.0002" to 0.0002"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B84100000000000000
    0.003"-0.0003" to 0.0003"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B84100000000000000
    0.005"-0.0005" to 0.0005"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B8410000000000000
    0.01"-0.00075" to 0.00075"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B8410000000000000
    0.015"-0.001" to 0.001"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B8410000000000000
    0.02"-0.001" to 0.001"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B84100000000000000
    0.025"-0.0015" to 0.0015"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B84100000000000000
    0.031"-0.0015" to 0.0015"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B84100000000000000
    0.062"-0.0025" to 0.0025"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B84100000000000000
    0.125"-0.003" to 0.003"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B84100000000000000
     
    For 1 1/4" Diameter Shafts
    0.001"-0.0001" to 0.0001"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B84100000000000000
    0.002"-0.0002" to 0.0002"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B84100000000000000
    0.003"-0.0003" to 0.0003"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B84100000000000000
    0.005"-0.0005" to 0.0005"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B8410000000000000
    0.01"-0.00075" to 0.00075"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B8410000000000000
    0.015"-0.001" to 0.001"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B8410000000000000
    0.02"-0.001" to 0.001"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B84100000000000000
    0.025"-0.0015" to 0.0015"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B84100000000000000
    0.031"-0.0015" to 0.0015"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B84100000000000000
    0.062"-0.0025" to 0.0025"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B84100000000000000
    0.125"-0.003" to 0.003"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B84100000000000000
     
    For 1 1/2" Diameter Shafts
    0.001"-0.0001" to 0.0001"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B84100000000000000
    0.002"-0.0002" to 0.0002"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B84100000000000000
    0.003"-0.0003" to 0.0003"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B84100000000000000
    0.005"-0.0005" to 0.0005"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B84100000000000000
    0.01"-0.00075" to 0.00075"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B84100000000000000
    0.015"-0.001" to 0.001"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B84100000000000000
    0.02"-0.001" to 0.001"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B84100000000000000
    0.025"-0.0015" to 0.0015"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B84100000000000000
    0.031"-0.0015" to 0.0015"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B84100000000000000
    0.062"-0.0025" to 0.0025"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B84100000000000000
    0.125"-0.003" to 0.003"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B84100000000000000
     
    For 2" Diameter Shafts
    0.002"-0.0002" to 0.0002"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8450000000000000
    0.003"-0.0003" to 0.0003"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8450000000000000
    0.005"-0.0005" to 0.0005"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B84100000000000000
    0.01"-0.00075" to 0.00075"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B84100000000000000
    0.015"-0.001" to 0.001"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B84100000000000000
    0.02"-0.001" to 0.001"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8450000000000000
    0.025"-0.0015" to 0.0015"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8450000000000000
    0.031"-0.0015" to 0.0015"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8450000000000000
    0.062"-0.0025" to 0.0025"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8450000000000000
    0.125"-0.003" to 0.003"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B8450000000000000
     
    Tab
    Image of Product. Front orientation. Shims. For Keyed Shafts, Sold Individually, Round, Tab.
    Fit these shims around keyed shafts and arbors that don't have a key inserted—the tab sits inside the keyway.
    Carbon Steel—Best for dry environments since moisture will cause these shims to rust.
    Tab
    Thk.
    Thk. Tolerance
    ID
    ID
    Tolerance
    OD
    OD Tolerance
    Wd.
    Dp.
    Min.
    Hardness
    Pkg.
    Qty.
    Pkg.
    Carbon Steel
     
    For 1" Diameter Shafts
    0.005"-0.0005" to 0.0005"1"0" to 0.011"1 1/2"-0.005" to 0.005"1/4"3/32"Rockwell B84100000000000000
    0.01"-0.00075" to 0.00075"1"0" to 0.011"1 1/2"-0.005" to 0.005"1/4"3/32"Rockwell B8410000000000000
    0.015"-0.001" to 0.001"1"0" to 0.011"1 1/2"-0.005" to 0.005"1/4"3/32"Rockwell B8410000000000000
    0.02"-0.001" to 0.001"1"0" to 0.011"1 1/2"-0.005" to 0.005"1/4"3/32"Rockwell B8410000000000000
    0.031"-0.0015" to 0.0015"1"0" to 0.011"1 1/2"-0.005" to 0.005"1/4"3/32"Rockwell B8410000000000000
    0.062"-0.0025" to 0.0025"1"0" to 0.011"1 1/2"-0.005" to 0.005"1/4"3/32"Rockwell B84100000000000000
    0.125"-0.003" to 0.003"1"0" to 0.011"1 1/2"-0.005" to 0.005"1/4"3/32"Rockwell B845000000000000
     
    For 1 1/2" Diameter Shafts
    0.005"-0.0005" to 0.0005"1 1/2"0" to 0.011"2 1/8"-0.005" to 0.005"3/8"5/32"Rockwell B84100000000000000
    0.01"-0.00075" to 0.00075"1 1/2"0" to 0.011"2 1/8"-0.005" to 0.005"3/8"5/32"Rockwell B84100000000000000
    0.015"-0.001" to 0.001"1 1/2"0" to 0.011"2 1/8"-0.005" to 0.005"3/8"5/32"Rockwell B84100000000000000
    0.02"-0.001" to 0.001"1 1/2"0" to 0.011"2 1/8"-0.005" to 0.005"3/8"5/32"Rockwell B84100000000000000
    0.031"-0.0015" to 0.0015"1 1/2"0" to 0.011"2 1/8"-0.005" to 0.005"3/8"5/32"Rockwell B84100000000000000
    0.062"-0.0025" to 0.0025"1 1/2"0" to 0.011"2 1/8"-0.005" to 0.005"3/8"5/32"Rockwell B845000000000000
    0.125"-0.003" to 0.003"1 1/2"0" to 0.011"2 1/8"-0.005" to 0.005"3/8"5/32"Rockwell B8450000000000000
     
    For 2" Diameter Shafts
    0.005"-0.0005" to 0.0005"2"0" to 0.011"2 3/4"-0.005" to 0.005"1/2"3/16"Rockwell B845000000000000
    0.01"-0.00075" to 0.00075"2"0" to 0.011"2 3/4"-0.005" to 0.005"1/2"3/16"Rockwell B845000000000000
    0.015"-0.001" to 0.001"2"0" to 0.011"2 3/4"-0.005" to 0.005"1/2"3/16"Rockwell B845000000000000
    0.02"-0.001" to 0.001"2"0" to 0.011"2 3/4"-0.005" to 0.005"1/2"3/16"Rockwell B845000000000000
    0.031"-0.0015" to 0.0015"2"0" to 0.011"2 3/4"-0.005" to 0.005"1/2"3/16"Rockwell B845000000000000
    0.062"-0.0025" to 0.0025"2"0" to 0.011"2 3/4"-0.005" to 0.005"1/2"3/16"Rockwell B845000000000000
    0.125"-0.003" to 0.003"2"0" to 0.011"2 3/4"-0.005" to 0.005"1/2"3/16"Rockwell B841000000000000
     

    Shim Assortments for Keyed Shafts

    Image of Product. Front orientation. Shims. For Keyed Shafts, Round, Sold as Assortments.
    When you don’t know the exact shim thickness you’ll need, keep multiple shim thicknesses for keyed shafts on hand so you always have the right one. Fit these notched shims around keyed shafts and arbors that have a key inserted. Use them on keyed shafts to precisely align and space gears, sprockets, and bearings. On keyed arbors, they’re often used to accurately space saw blades and cutters. These shims are often referred to as arbor spacers.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    Carbon Steel—Best for dry environments since moisture will cause these shims to rust.
    Notch
    No. of
    Pieces
    For Shaft
    Dia.
    ID × OD Included
    Thicknesses Included
    Wd.
    Dp.
    Min.
    Hardness
    Each
    Carbon Steel
    193/8"3/8" ID × 5/8" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"1/8"3/64"Rockwell B8400000000000000
    191/2"1/2" ID × 3/4" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"1/8"3/64"Rockwell B840000000000000
    195/8"5/8" ID × 1" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"3/16"1/16"Rockwell B840000000000000
    193/4"3/4" ID × 1 1/8" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"3/16"5/64"Rockwell B840000000000000
    197/8"7/8" ID × 1 3/8" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"3/16"5/64"Rockwell B840000000000000
    191"1" ID × 1 1/2" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"1/4"3/32"Rockwell B840000000000000
    191 1/8"1 1/8" ID × 1 5/8" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"1/4"1/8"Rockwell B840000000000000
    191 1/4"1 1/4" ID × 1 3/4" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"5/16"1/8"Rockwell B840000000000000
    191 3/8"1 3/8" ID × 1 7/8" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"5/16"1/8"Rockwell B840000000000000
    191 1/2"1 1/2" ID × 2 1/8" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"3/8"5/32"Rockwell B840000000000000
    191 3/4"1 3/4" ID × 2 3/4" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"7/16"3/16"Rockwell B840000000000000
    192"2" ID × 2 3/4" OD0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", 0.031", 0.047", 0.062", 0.093", 0.125"1/2"3/16"Rockwell B840000000000000
     
    back to top