An insulated handle protects against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Fit this compact cutter into your pocket or tool belt.

Ensure precise cuts with a measuring scale and adjustable blade depth.

Produce clean, distortion-free cuts in cable with one-handed operation.

The carbide-tipped teeth on these saws last up to twice as long as high-speed steel teeth.

These saws have carbide-grit-coated teeth.

The saws in these kits have carbide-grit-coated teeth that cut ceramic tile, fiberglass, masonry, plastic, and composites.

The carbide-grit edge on these blades cuts brittle and abrasive materials including glass and fiberglass.

The edge of the blade is coated with diamond grit, which lasts longer than carbide grit.

Tooth size and number per inch are constant throughout the blade.

These blades have carbide grit bonded to the edge.

The teeth on these steel blades are carbide tipped, so they'll last longer and produce a smoother cut than other band saw blades when cutting fiberglass, plastic, and composites.

The diamond grit bonded to the edge of these steel blades lasts up to 30 times longer and cuts twice as fast as carbide grit.

For accurate punching of inner and outer holes, these sets come with pilots that attach to the outer hole punch.

Use a wrench to cut DIN-size holes in steel up to 1/16" thick.

The driver supplies eight tons of force to the hole punches in this set to make straight punches.

Create larger holes and make repeated punches with these drivers that supply 11 tons of force to the included hole punches.

A locking clamp eliminates the need to thread the punch onto the stud, making setup and disassembly quicker than with standard punches.

Use twice the punching force of standard extended-reach punches to make holes in structural steel channels and angle iron.

For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills.

These end mills have a diamond or diamondlike coating for machining abrasive material, such as carbon fiber, fiberglass, and graphite.

Use these tools with low-horsepower, manual milling machines. They have clamps for holding inserts that do not have a mounting hole. Replaceable carbide-insert end mills reduce waste and cost in high-volume jobs—when the cutting edges dull, replace the carbide inserts instead of the entire end mill.

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their angled profile allows chamfer, bevel, and other angled cuts.

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. Also known as taper degree end mills, they're often used to machine angled slots in dies and molds.

For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills.

When one end wears out, switch to the opposite end for two times the life of a standard carbide end mill. Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

Made of solid carbide, these keyseat cutters are harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material. They have an alternating right- and left-hand tooth style for removing more material at high speeds than straight-tooth keyseat cutters.

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Use them to round sharp corners on the edge of your workpiece.

Made of solid carbide, these end mills are harder, stronger, and more wear resistant than cobalt steel for the longest life and best finish on hard material. A 90° pointed tip allows them to be used for drilling as well as for slotting, profiling, chamfering, and spotting cuts.

The end mills in these sets have one milling end and a standard shank. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

Offering two times the life of a standard carbide end mill, the end mills in these sets have two milling ends so you can switch to the opposite end when one end wears out. Made of solid carbide, they're harder, stronger, and more wear resistant than high-speed steel for the longest life and best finish on hard material.

When cutting threads in nonferrous and nonmetallic materials, such as aluminum, copper, fiberglass, and plastic, diamond tips provide superior cutting performance.

The diamond-pattern flutes and cutting edges produce a fine finish on composite material.

Use these cutters with Milwaukee magnetic-base drill presses. Also known as annular cutters.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

These jobbers'-length bits have the rigidity and length required for most applications.

Made with a large number of flutes and cutting edges to lightly shear off material, these tools repair and clean out holes for machining between centers.

The 100° countersink angle is compatible with the profile of rivets.

The 60° countersink angle is compatible with the profile of centers on a lathe.

Carbide is harder, stronger, and more wear resistant than high-speed steel for better performance on hard and abrasive materials.

Carbide is harder, stronger, and more wear resistant than high-speed steel for excellent performance on hard and abrasive materials.

Carbide is harder, stronger, and more wear resistant than high-speed steel for better performance on hard and abrasive materials.

Drill and finish holes in a single pass with these dual-purpose tools.

Cut a range of thread sizes with a single tool. These thread mills can also produce both right-hand and left-hand threads.

Keep taps and drill bits organized. All holes are labeled with sizes. Taps and drill bits are not included.

With replaceable dies, these long-lasting tools can repair both screw threads and pipe and conduit threads. Use them for holes with an ID from 3/4" to 6".

Repair rusted and damaged threads in pipe and conduit. These files are for use in most hole diameters.

Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes.

Tighten cable ties and trim the excess with these tools.