Create molds for vacuum-forming and thermoforming applications. Metapor aluminum is porous to let air and moisture escape, which prevents bubbles and blemishes.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Because this 6/12 material absorbs less water than standard nylon 6/6, it holds its shape better. It’s often machined into hose fittings and valve components.

Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

Often used to make gears and wear strips, these cast nylon 6 sheets and bars withstand higher temperatures and are easier to machine than standard nylon 6/6 sheets and bars.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Made with carbon black, these recycled UHMW sheets are a sustainable alternative to standard UHMW sheets in applications where static electricity is a concern, such as in conveying equipment and chute liners.

Often used in high-speed, high-precision, and high-impact applications, such as conveyor rollers and bearings, these rods stand up to scratches and scuffs better than our standard UHMW polyethylene rods. Also known as Tivar HPV.

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.

Also known as starboard, these sheets and bars won’t degrade when exposed to salt water, humidity, and UV light.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Package food, textiles, and other products in wet environments. This film won’t absorb or swell from water.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Polycarbonate maintains good impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

When moisture-resistant polyester is combined with PTFE, the result is this self-lubricating material. It’s also called Hydex and PBT.

These black polyester sheets protect from UV rays better than off-white polyester. Strong and semi-rigid, they won't swell in moist environments, so they're often made into pump components and spacers.

This film is often used as a separator when heating parts in an oven.

One of the softest and most flexible plastics we offer, LDPE is more formable than HDPE.

Known for its electrical insulating properties, this polystyrene is often used for cable connectors, electrical housings, and in microwave applications. It is also known as Rexolite.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

Manufactured from Rulon PTFE, a PTFE material that's modified with epoxy-coated fiber for a super-slippery, impact-resistant surface that resists wear.

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Carbon enhances the stiffness of this material, while the addition of PTFE ensures a slippery surface.

Often used in food and pharmaceutical plants, these PEEK rods help you prevent contaminated products from leaving your facility.

Vespel® polyimide offers excellent strength, even at extreme temperatures.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.

Stronger and more rigid than Torlon 4301 and 4203 because they’re filled with glass, these Torlon 5030 rods are also electrical insulators like Torlon 4203.

Use PFA in place of PTFE and FEP for durability in repetitive processes, such as pump parts. It is chemical resistant across a wide temperature range.

When excellent chemical resistance is combined with an ability to hold tight tolerances, the result is PPS—a material that’s widely machined into parts for chemical-processing applications. It is comparable to Techtron and Ryton.

Kapton® polyimide film is an excellent electrical insulator.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's commonly known as Lexan, Hyzod, Tuffak, and Makrolon.

PETG can be formed into complex shapes without sacrificing durability.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

Because PVC resists acids and alkalies, it is often used in tanks and chemical-processing applications where visibility is essential.

Also called acetate, this is the same clear film that's used in window envelopes.

A static-dissipative coating on this polyester film prevents electrostatic discharge from damaging sensitive electronic equipment.

PFA film retains its performance properties through a wide range of temperatures. It is often used to insulate cables.

Packs include one 2” square of ABS, Delrin® acetal, LDPE, HDPE, UHMW, nylon, cast nylon, polyester, polystyrene, Rexolite polystyrene, and Noryl PPO.

Each selector pack includes one 2” square of FEP, polypropylene, PPS, PVC, CPVC, PVDF, and Teflon® PTFE.

Fiberglass threaded rods are stronger than nylon threaded rods. They resist acids, solvents, salt water, and oil.

These metric threaded rods are made from nylon 6/6 and resist oil, grease, and solvents. They’re nonconductive, making them good for use around sensitive electrical components.

Unlike metal rods, these metric threaded rods will not warp at extreme temperatures, making them ideal for heat treating and furnace fixtures.

PTFE threaded rods withstand temperatures up to 250° F and resist oil, grease, detergents, and most mineral acids. They're the lowest friction plastic threaded rods we offer, so they thread on smoothly.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

These rectangular tubes are flame retardant, machinable, and electrically insulating.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

A flame-retardant version of Garolite G-11, these tubes are commonly used to make bushings, standoffs, and spacers for areas with high temperatures. All are stronger and resist heat better than Garolite G-10/FR4.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Easily turn these rectangular tubes into parts for transformers and switchgears using high-speed tooling.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

Garolite CE is often fabricated into parts where high strength is not required.

Choose these Garolite G-7 rods for their high heat tolerance—they withstand temperatures up to 425° F. While not as strong as Garolite G-9, they offer better arc resistance in dry environments.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Machine these angles into arc barriers, switch mounts, and components for circuit breakers and electrical equipment. They resist carrying electric currents in dry or humid areas, even when exposed to sudden electric discharge.

Commonly used in transformers and switch gear cans on electrical poles, these rectangular tubes are more electrically insulating than Garolite XX.

Rated for temperatures down to -450° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Use these round GPO3 fiberglass tubes for electrical applications in humid environments.

Route and insulate wire using these square fiberglass tubes, which fit better along edges and around corners than round tubes.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.