A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

With a coating that reduces static electricity , these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94V0 for flame retardance.

Used in turbine bearings, downpipe gaskets, and other machinery, these Garolite tubes withstand heavy impacts and temperatures as high as 500° F.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

These Garolite CE sheets and bars are often fabricated into parts where high strength is not required.

Garolite CE is often fabricated into parts where high strength is not required.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

A flame-retardant version of Garolite G-11, these tubes are commonly used to make bushings, standoffs, and spacers for areas with high temperatures. All are stronger and resist heat better than Garolite G-10/FR4.

Often used for terminal boards, electrical housings, end plates, and structural components in high temperatures, these sheets are a flame-retardant version of Garolite G-11. All are stronger and resist heat better than Garolite G-10/FR4.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Rated for temperatures down to -450° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

Choose these Garolite G-7 rods for their high heat tolerance—they withstand temperatures up to 425° F. While not as strong as Garolite G-9, they offer better arc resistance in dry environments.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Machine these angles into arc barriers, switch mounts, and components for circuit breakers and electrical equipment. They resist carrying electric currents in dry or humid areas, even when exposed to sudden electric discharge.

Frequently called electrical-grade Garolite, this Garolite G-9 is strong, electrically insulating, and arc resistant in dry environments.

A combination of high impact strength and extreme hardness makes Garolite E-glass very difficult to penetrate. It is often used for machine guards.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

Use these round GPO3 fiberglass tubes for electrical applications in humid environments.

Route and insulate wire using these square fiberglass tubes, which fit better along edges and around corners than round tubes.

SG-200 fiberglass withstands temperatures up to 410° F—higher than any of our other fiberglass raw materials. It’s also stronger than FRP fiberglass and easy to machine.

Made with a flame-retardant resin, this FRP fiberglass meets ASTM E84 Class A.

Known for its use in the aerospace industry, where a balance of weight and strength is critical, carbon fiber is now often machined into panels for structural framing, machinery components, and robotics.

Mount these lightweight tubes to flat surfaces in place of aluminum to create structural frames, machinery components, and robotics.

Often used to make railings, edge covers, and other structural framing parts, these carbon fiber U-channels add stiffness and strength to applications without adding a lot of weight.

Layers of fibers alternating in four directions makes this carbon fiber stiff at the corners and edges, so it stands up to twisting forces.

Fit these lightweight tubes inside each other to create adjustable tubes for structural framing, machinery components, and robotics.

In addition to repairing or reinforcing existing composites, these filaments can be wrapped around mandrels to create new composite shapes. All add stiffness and strength to a variety of applications.

Almost as stiff as steel and a fraction of the weight, these carbon fiber sheets are often used for structural framing, machinery components, and robotics.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Kevlar is a super-tough material that stands up to wear and abrasion.

Drill and mill precisely shaped heat sinks and other electronic components that require thermal stability.

These PEEK sheets can be machined to tight tolerances for use in electrical and semiconductor parts, such as test sockets.

Unlike metal rods, these threaded rods will not warp at extreme temperatures, making them ideal for heat treating and furnace fixtures.