A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.

Connect Wilkerson modular filter/regulator/lubricator components with the same series number.

Connect Festo modular filter/regulator/lubricator components with the same series number.

Connect ARO modular filter/regulator/lubricator components with the same series number.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

Swap out Parker modular filter/regulator/lubricator components without unthreading your air line connections.

Swap out ARO modular filter/regulator/lubricator components without unthreading your air line connections.

Swap out SMC modular filter/regulator/lubricator components without unthreading your air line connections.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Distribute compressed air to multiple locations from a single source.

Replace a damaged bowl, or change the bowl material or drain type on your Wilkerson modular compressed air filter.

Replace a damaged bowl or change the bowl material or drain type on your Parker modular compressed air filter.

Replace a damaged bowl, or change the drain type on your Festo modular compressed air filter.

Replace the filter element in your Wilkerson modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Aventics modular compressed air filter to trap solid particles and water droplets.

Replace the filter element in your Parker modular compressed air filter to trap solid particles and water droplets.

Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.

Also known as coalescing filters, these filter elements fit in ARO modular compressed air filters to remove oil and particles as small as 0.3 microns.

Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and fine particles.

Also known as coalescing filters, these filter elements fit in Aventics modular compressed air filters to remove oil and particles as small as 0.01 microns.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air. Joiner clamps connect these air filters into your Parker setup.

Discharge up to 300 gallons of water and particles per hour—these filters handle compressed air that’s high in moisture content.

Quickly install these filters on your air line—no pipe nipples or joiner clamps required. Their push-to-connect fittings create tight seals around tubing.

The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.

Use these filters to extend the service life of air-powered tools and then throw them away when you're done.

Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers.

Replace failing or lost O-rings and gaskets in Norgren modular compressed air filters.

Replace failing or lost O-rings in Aventics modular compressed air filters.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Mount these filters to a 35 mm DIN rail with the included brackets.

Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.

Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.

Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.

No need to buy and service two filters—these filters have a single element that removes both oil and particles.

Replace a cracked or lost sight dome on your Parker modular compressed air lubricator.

Replace a cracked or lost sight dome on your Norgren modular compressed air lubricator.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Replace a damaged bowl on your Norgren modular compressed air lubricator.

Replace a damaged bowl, or change the bowl material on your ARO modular compressed air lubricator.

Replace a damaged bowl on your Festo modular compressed air lubricator.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

Use a single air supply to meet the pressure requirements of multiple applications—connect one of these manifolds to your air line, and then set a different output pressure for each station.

Adjust and maintain the pressure of your compressed air—joiner clamps connect these regulators into your ARO setup.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air—joiner clamps connect these regulators into your Aventics setup.

Adjust and maintain the pressure of your compressed air.

An internal check valve permits reverse flow, so these regulators work with double-acting cylinders.

Mount these regulators to a 35 mm DIN rail with the included brackets. Use them to adjust and maintain the pressure of your compressed air.

A lower profile than our other compressed air regulators makes these regulators a better fit in tight spots.

Use these regulators to adjust and maintain the pressure of your tubing air lines.