About Draw Latches
More
Tight-Hold Draw Latches
Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold. Capacity is the maximum amount of force the latch can withstand. The overall length listed includes the strike plate.
Latches | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting | Replacement Strike Plates | |||||||||||
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size  | Each | Each | |||
Screw On | |||||||||||||
| A | 300 Series Stainless Steel | Polished | 3/8" | 1 7/16" | 1/2" | 5/16" | 200 | No | No. 5 | 0000000 | 00000 | 0000000 | 00000 |
| B | Zinc-Plated Steel | Dull | 1 5/16" | 2 3/4" | 1 3/16" | 7/16" | 400 | No | No. 6 | 0000000 | 0000 | 0000000 | 0000 |
| B | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 3/16" | 7/16" | 400 | No | No. 6 | 0000000 | 0000 | 0000000 | 0000 |
| C | Zinc-Plated Steel | Dull | 1 5/16" | 2 3/4" | 1 1/8" | 1/2" | 400 | No | No. 6 | 0000000 | 0000 | 0000000 | 0000 |
| C | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 1/8" | 1/2" | 400 | No | No. 6 | 0000000 | 00000 | 0000000 | 0000 |
| D | Zinc-Plated Steel | Dull | 1 5/16" | 2 3/4" | 1 1/8" | 3/8" | 400 | No | No. 6 | 0000000 | 0000 | 0000000 | 0000 |
| D | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 1/8" | 3/8" | 400 | No | No. 6 | 0000000 | 0000 | 0000000 | 0000 |
| E | 300 Series Stainless Steel | Polished | 1 5/16" | 1 7/16" | 1/2" | 1/4" | 400 | No | No. 5 | 0000000 | 00000 | 0000000 | 0000 |
| F | 304 Stainless Steel | Polished | 1 3/4" | 3 1/8" | 1 5/16" | 3/4" | Not Rated | No | No. 5 | 0000000 | 00000 | 000000 | 00 |
| G | Zinc-Plated Steel | Dull | 1 1/4" | 2 3/8" | 1 3/8" | 1/2" | Not Rated | No | No. 6 | 0000000 | 0000 | 000000 | 00 |
| G | Zinc-Plated Steel | Dull | 1 3/8" | 2 3/4" | 1 1/2" | 1/2" | Not Rated | No | No. 3 | 0000000 | 0000 | 000000 | 00 |
| G | Zinc-Plated Steel | Dull | 1 3/8" | 3 1/2" | 1 15/16" | 5/8" | Not Rated | No | No. 10, No. 12 | 0000000 | 00000 | 000000 | 00 |
| G | Zinc-Plated Steel | Dull | 1 7/16" | 3 7/8" | 1 7/8" | 5/8" | Not Rated | No | No. 5 | 0000000 | 0000 | 000000 | 00 |
| G | 300 Series Stainless Steel | Polished | 1 3/8" | 3 13/16" | 1 15/16" | 5/8" | Not Rated | No | No. 12, No. 5 | 0000000 | 00000 | 0000000 | 0000 |
| G | 304 Stainless Steel | Polished | 7/8" | 2" | 1 1/4" | 3/8" | Not Rated | No | No. 3 | 0000000 | 0000 | 000000 | 00 |
| G | 304 Stainless Steel | Polished | 1 3/8" | 2 11/16" | 1 1/2" | 9/16" | Not Rated | No | No. 5 | 0000000 | 0000 | 000000 | 00 |
| G | 304 Stainless Steel | Polished | 1 3/8" | 3 3/4" | 1 13/16" | 5/8" | Not Rated | No | No. 5 | 0000000 | 00000 | 000000 | 00 |
Weld On | |||||||||||||
| C | Zinc-Plated Steel | Dull | 1 5/16" | 2 3/4" | 1 1/8" | 1/2" | 400 | __ | __ | 0000000 | 0000 | 0000000 | 0000 |
| C | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 1/8" | 1/2" | 400 | __ | __ | 0000000 | 00000 | 0000000 | 0000 |
| D | Zinc-Plated Steel | Dull | 1 5/16" | 2 3/4" | 1 1/8" | 3/8" | 400 | __ | __ | 0000000 | 0000 | 0000000 | 0000 |
| D | 300 Series Stainless Steel | Polished | 1 5/16" | 2 3/4" | 1 1/8" | 3/8" | 400 | __ | __ | 0000000 | 0000 | 0000000 | 0000 |
| H | Steel | Dull | 1 1/4" | 2 3/8" | 1 3/8" | 1/2" | Not Rated | __ | __ | 0000000 | 0000 | 000000 | 00 |
Tight-Hold Draw Latches with Safety Catch
To prevent accidental opening, this latch has a safety catch. Designed with compression springs to withstand vibration better than standard draw latches, it offers a more secure hold. Capacity is the maximum amount of force the latch can withstand. The overall length listed includes the strike plate.
Latches | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting | Replacement Strike Plates | |||||||||||
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Each | Each | |||
Screw On | |||||||||||||
| A | 300 Series Stainless Steel | Polished | 1 11/16" | 2 3/4" | 1 1/8" | 5/8" | 400 | No | No. 6 | 0000000 | 000000 | 0000000 | 00000 |
| B | 304 Stainless Steel | Polished | 1 11/16" | 3 1/4" | 1 5/16" | 3/4" | Not Rated | No | M4 | 0000000 | 00000 | 000000 | 00 |
| B | 304 Stainless Steel | Polished | 1 13/16" | 3 15/16" | 2 1/16" | 3/4" | Not Rated | No | M4 | 0000000 | 00000 | 000000 | 00 |
Weld On | |||||||||||||
| A | Zinc-Plated Steel | Dull | 1 11/16" | 2 3/4" | 1 1/8" | 5/8" | 400 | __ | __ | 0000000 | 00000 | 000000 | 00 |
| A | 300 Series Stainless Steel | Polished | 1 11/16" | 2 3/4" | 1 1/8" | 5/8" | 400 | __ | __ | 0000000 | 00000 | 000000 | 00 |
Corner-Mount Tight-Hold Draw Latches
Mount these latches on a corner to draw perpendicular surfaces together. Designed with compression springs to withstand vibration better than standard draw latches, they offer a more secure hold. The overall length listed includes the strike plate.
Latches with a safety catch prevent accidental opening.
Overall | Mounting | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity | Fasteners Included | Screw Size | Each | |
Straight Strike Plate | ||||||||||
Draw Latches | ||||||||||
| 304 Stainless Steel | Polished | 1 1/8" | 2 1/4" | 1 9/16" | 5/8" | Not Rated | No | M4 | 0000000 | 000000 |
Draw Latches with Safety Catch | ||||||||||
| 304 Stainless Steel | Polished | 2 3/16" | 2 3/8" | 1 11/16" | 5/8" | Not Rated | No | M3 | 0000000 | 00000 |
| 304 Stainless Steel | Polished | 2 9/16" | 3 5/8" | 2 1/4" | 3/4" | Not Rated | No | M4 | 0000000 | 00000 |
| 304 Stainless Steel | Polished | 2 13/16" | 4 3/8" | 2 1/2" | 1" | Not Rated | No | M5 | 0000000 | 00000 |
90° Angle Strike Plate | ||||||||||
Draw Latches | ||||||||||
| 304 Stainless Steel | Polished | 1 1/8" | 2 1/4" | 1 9/16" | 5/8" | Not Rated | No | M4 | 0000000 | 00000 |
Draw Latches with Safety Catch | ||||||||||
| 304 Stainless Steel | Polished | 2 9/16" | 3 5/8" | 2 1/4" | 3/4" | Not Rated | No | M4 | 0000000 | 00000 |
| 304 Stainless Steel | Polished | 2 13/16" | 4 3/8" | 2 1/2" | 1" | Not Rated | No | M5 | 0000000 | 00000 |
Corner-Mount Draw Latches
These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers. The overall length listed includes the strike plate.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Length | Width | Projection | Capacity, lbs. | Fasteners Included | Screw Size | Each | ||
Screw On | |||||||||||
| A | Zinc-Plated Steel | Dull | 1" | 3 3/16" | 1 9/16" | 1 1/16" | 310 | No | M5 | 00000000 | 000000 |
| B | 304 Stainless Steel | Polished | 13/16" | 2 1/8" | 15/16" | 7/8" | 155 | No | M4 | 00000000 | 00000 |
| C | 304 Stainless Steel | Polished | 13/16" | 2 1/8" | 15/16" | 7/8" | 155 | No | M4 | 00000000 | 00000 |
| D | 304 Stainless Steel | Polished | 1 7/16" | 5" | 2 3/16" | 1 13/16" | 895 | No | M6 | 00000000 | 00000 |
| D | 304 Stainless Steel | Polished | 2 3/8" | 6 15/16" | 2 5/8" | 2 3/16" | 1,010 | No | M6 | 00000000 | 00000 |
| D | 304 Stainless Steel | Polished | 2 3/8" | 9" | 2 5/8" | 2 3/8" | 1,010 | No | M6 | 00000000 | 00000 |
| E | 304 Stainless Steel | Polished | 11/16" | 2 1/8" | 1 1/16" | 7/16" | Not Rated | No | M3 | 00000000 | 00000 |
| E | 304 Stainless Steel | Polished | 15/16" | 2 5/8" | 1 5/16" | 1/2" | Not Rated | No | M4 | 00000000 | 00000 |
| E | 304 Stainless Steel | Polished | 1 5/16" | 3 1/4" | 1 5/8" | 9/16" | 115 | No | M4 | 00000000 | 00000 |
| F | 304 Stainless Steel | Polished | 2 1/16" | 2 7/16" | 1 1/8" | 3/4" | 75 | No | M4 | 00000000 | 00000 |
| G | 304 Stainless Steel | Polished | 1 7/8" | 2 1/4" | 1 13/16" | 1/2" | 25 | No | M4 | 00000000 | 00000 |
Padlockable Draw Latches
Capacity is the maximum amount of force the latch can withstand. The overall length listed includes the strike plate.
Latches | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting | Replacement Strike Plates | |||||||||||||
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity, lbs. | For Max. Padlock Shackle Dia. | Fasteners Included | Screw Size | Pkg. Qty. | Pkg. | Each | |||
Screw On | |||||||||||||||
| B | Zinc-Plated Steel | Polished | 2 9/16" | 2 1/2" | 7/8" | 3/4" | Not Rated | 1/4" | No | No. 6 | 1 | 0000000 | 00000 | 0000000 | 00000 |
| B | 300 Series Stainless Steel | Dull | 2 9/16" | 2 1/2" | 7/8" | 3/4" | Not Rated | 1/4" | No | No. 6 | 1 | 0000000 | 00000 | 0000000 | 0000 |
| G | 300 Series Stainless Steel | Dull | 1 5/16" | 2 3/4" | 1 3/16" | 15/16" | 400 | 3/8" | No | No. 6 | 1 | 0000000 | 00000 | 000000 | 00 |
| H | Zinc-Plated Steel | Polished | 3 7/8" | 3 7/8" | 1 1/4" | 15/16" | Not Rated | 3/8" | No | No. 10 | 1 | 0000000 | 0000 | 0000000 | 0000 |
| H | 300 Series Stainless Steel | Dull | 3 7/8" | 3 7/8" | 1 1/4" | 15/16" | Not Rated | 3/8" | No | No. 10 | 1 | 0000000 | 00000 | 0000000 | 0000 |
| J | Zinc-Plated Steel | Polished | 4 1/2" | 3 5/8" | 1 7/8" | 7/8" | Not Rated | 1/4" | No | No. 10 | 1 | 0000000 | 00000 | 0000000 | 0000 |
Tight-Hold Padlockable Draw Latches
Designed with springs to withstand vibration better than other standard padlockable draw latches, these offer a more secure hold. Capacity is the maximum amount of force the latch can withstand. The overall length listed includes the strike plate.
Latches | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting | Replacement Strike Plates | ||||||||||||
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity | For Max. Padlock Shackle Dia. | Fasteners Included | Screw Size | Each | Each | |||
| A | Zinc-Plated Steel | Polished | 1 1/16" | 3" | 1 3/8" | 13/16" | Not Rated | 5/16" | No | No. 6 | 0000000 | 00000 | 0000000 | 00000 |
| A | Zinc-Plated Steel | Polished | 1 1/4" | 3 5/8" | 1 13/16" | 15/16" | Not Rated | 3/8" | No | No. 10, No. 12 | 0000000 | 00000 | 0000000 | 0000 |
| B | Zinc-Plated Steel | Polished | 4 1/16" | 3 3/16" | 1 7/8" | 7/8" | Not Rated | 3/8" | No | No. 10 | 0000000 | 00000 | 0000000 | 0000 |
| B | 300 Series Stainless Steel | Dull | 4 1/16" | 3 3/16" | 1 7/8" | 7/8" | Not Rated | 3/8" | No | No. 10 | 0000000 | 00000 | 0000000 | 0000 |
Corner-Mount Tight-Hold Padlockable Draw Latches with Safety Catch
Mount this latch on a corner to draw perpendicular surfaces together. It has a safety catch to prevent accidental opening. Designed with compression springs to withstand vibration better than standard padlockable draw latches, it offers a more secure hold. The overall length listed includes the strike plate.
Overall | Mounting | Straight Strike Plate | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Lg. | Wd. | Projection | Capacity | For Max. Padlock Shackle Dia. | Fasteners Included | Screw Size | Each | |
| 304 Stainless Steel | Polished | 1 1/8" | 2 9/16" | 1 9/16" | 5/8" | Not Rated | 3/16" | No | M4 | 0000000 | 000000 |
Keyed Corner-Mount Draw Locks
Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together. They’re keyed alike, so choose them if you need several locks that open with the same key. The overall length listed includes the strike plate.
Overall | Mounting | Straight Strike Plate | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Appearance | Latching Distance | Length | Width | Projection | Capacity | Fasteners Included | Screw Size | Key Number | Number of Keys Included | Each | |
| 304 Stainless Steel | Polished | 3/4" | 2 1/16" | 1" | 7/16" | Not Rated | No | No. 5 | 0200 | 2 | 0000000 | 000000 |
| 304 Stainless Steel | Polished | 1" | 2 9/16" | 1 1/4" | 1/2" | Not Rated | No | No. 8 | 0200 | 2 | 0000000 | 00000 |
| 304 Stainless Steel | Polished | 1 1/4" | 3 1/4" | 1 9/16" | 5/8" | Not Rated | No | No. 8 | 0200 | 2 | 0000000 | 00000 |