Send video and audio from a single DisplayPort output to multiple displays. These splitters are often used to show the same image on multiple screens or to stretch a computer desktop across two monitors.

Bring USB connections closer to where you need them.

These panel-mount adapters have a female USB connection on both ends to join two USB cables.

Adapt connections to attach cords to a computer.

Convert one HDMI size or style to another.

Mount these adapters directly into panel cutouts to attach D-Sub connectors and cords to computers.

Connect two stereo cords through a panel with these adapters.

Connect two fiber-optic cords that have the same gender and connection type. These adapters mount to panels of any thickness, as long as you drill a mounting hole first.

Mount two coaxial cords of the same gender and coaxial connection directly onto a panel cutout.

Protect sensitive equipment from electromagnetic interference.

Mount these adapters in a panel cutout.

Join coaxial cords even if they are a different style or the same gender.

With a ferrite filter block surrounding their contacts, these connectors control and reduce the electromagnetic (EMI) and radio frequency (RFI) interference traveling through them.

Create D-sub connection points in panels, cases, and enclosure walls.

Connect audio equipment. These connectors mount to panels of any thickness, as long as you drill a mounting hole first.

Two-thirds the size of M12 connectors, these connectors fit into tight spaces and shield against signal interference.

Protect sensitive equipment from electromagnetic interference.

These connectors allow you to connect USB devices to a circuit board.

Protect equipment from electromagnetic interference.

Add RJ45 connectors to circuit boards.

Protect connections in washdown environments while maintaining access—these RJ45 plugs and adapters latch together securely, yet quickly detach.

Audio/video HDMI connectors and cords are rated IP67 when mated.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

Transmit video to a single monitor.

No drilling or fasteners needed—a screw-in cover plate makes it easy to mount these chargers for powering up phones, tablets, speakers, cameras, and other small devices.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

The insulation serves as a tough armor that protects these cords in high-traffic areas.

Power up mobile devices and other electronics.

With Kevlar-reinforced nylon armor and a high-strength aluminum connector, these USB cords stand up to frequent use and bending better than standard USB cords.

Transmit audio, video, and data signals over long distances with minimal signal loss.

Send high-definition signals to monitors, TVs, and projectors.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Swap the plug to match the outlet of the region you’re in instead of using separate cords for each country. These adapter cords convert AC voltage to power DC electronics.

Plug these cords into a vehicle socket to charge devices that run on AC voltage.

Plug these adapter cords into a standard outlet and they change AC voltage to DC voltage.

These cords have a Nano M8 connector (also known as a pico connector) on one end and an USB Type-A connector on the other.

Couple these adapters with a cord that matches your outlet and length requirements to run DC-powered electronics.

No wire stripping is required—these connectors will pierce the insulation.

Connect wire without stripping—these splices pierce insulation.

Mount these Ethernet switches to DIN rail to bring connections closer to where you need them.

For use in harsh environments, these IP67 rated switches are protected from temporary submersion, and can withstand a wide temperature range.

Attach the included cord to an RJ45 wall outlet to isolate the signals of a data line, and use alligator clips to connect your testing device.

Connect two telephone cords together to create a longer cord.

With a single cord, send data and electricity to Power over Ethernet (PoE) compatible devices. These injectors are commonly used to run devices such as routers and wireless access points in areas where no power outlet is nearby.