Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring.

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.

Protect concrete from mild chemicals, salts, soaps, and detergents.

Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.

Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.

Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.

These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.

Able to withstand temperatures of up to 2500° F, these coatings absorb heat and release it later. Use them to improve the thermal efficiency of heaters, furnaces, and ovens to reduce energy costs. Also known as high-emissivity coatings.

These coatings meet UL 723 and are rated Class A by ASTM E84—the highest rating available—for their ability to limit the spread of flames and generation of smoke. Use them in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.

Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.

Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.