These economy cutoff saws have a lightweight nylon handle and are for less prolonged use than our medium duty air-powered cutoff saws. Easy to carry and portable, you can take these saws where you need them. They come in handy to cut through materials that have already been installed, such as pipe or tubing. Powered by air, these saws have more consistent power than battery-powered saws, so they’re less prone to bogging down and stalling when cutting. Use abrasive wheels with these saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

A higher air consumption rating gives these saws more power and allows them to cut for longer periods than light duty cutoff saws. Powered by air, they have more consistent power than battery-powered saws, so they’re less likely to stall out as you cut dense material. Use them for general purpose cutting, such as cutting through bolts and trimming excess metal from installed parts. They’re portable and have a durable composite handle, so you can move them where needed. Use them with abrasive wheels.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

With twice the horsepower of medium duty saws, these saws cut more quickly and through harder materials. Powered by air, they have more consistent power than battery-powered saws, so they're less likely to stall out as you cut dense material. They’re often used to cut through thick, installed material such as T-slotted framing. Use them with abrasive wheels.

Style B fit in tight spaces—they have a longer reach and use smaller cutoff wheels than Style A.

Warning: You must use wheels with a greater rpm rating than the no-load rpm of your tool.

Make small, detailed cuts anywhere on your jobsite with these portable saws. They deliver the same power as electric spiral saws but don’t require an outlet nearby. Also known as cut-out tools, these saws are often used to make cutouts in drywall for electrical boxes. Because they weigh under two pounds, they can be used comfortably with one hand for extended periods. Rechargeable batteries keep them powered wherever you need them. A brushless motor optimizes battery usage, so these saws run longer on a single charge. It also enhances longevity—they run cool and have few moving parts that require maintenance.

Use the tool-free bit change system to swap out dull bits without a wrench. An LED light brightens your workpiece, so you can see your cutting line clearly.

Some saws include rechargeable batteries. For saws where they’re not included, see DeWalt batteries and chargers.

Connect a dust extracting attachment (sold separately) to a dust collector to keep your work area cleaner and improve air quality.

Plunge these saws right into your material to make small, detailed cuts. Also known as cut-out tools, these saws are often used to make cutouts in drywall for electrical boxes. They weigh under three pounds and can be used comfortably with one hand for long periods. A dust blower clears debris from your cut line to keep it visible. Attach a cutoff wheel to make straight cuts.

Connect the circle-cutting attachment to create perfectly circular cuts from 4” to 12” in diameter.

Use an abrasive wheel with these saws for general purpose cutting jobs. You can cut steel square structural tubing, aluminum conduit, and other hard materials.

Saws with a quick-release vise adjust easily—just flip a lever then slide the vise jaw open or closed. With a tool-free wheel change, you release the wheel by turning the clamp that holds it in place.

Saws that cannot be sold outside the United States are restricted due to product regulations.

Make precise perpendicular cuts in metal and other hard materials from any bench top in your facility. Rechargeable batteries give you the same power as an electric cutoff saw, but without the hassle of needing access to an outlet. A brushless motor optimizes battery usage, so these saws run longer on a single charge. It also enhances longevity—they run cool and have few moving parts that require maintenance. Pair these saws with an abrasive wheel. They’re often used to cut steel square structural tubing and aluminum conduit.

Soon after you release the trigger, an electric brake stops the blade for quick repositioning to make repeated cuts. Equipped with a quick-release vise, these saws secure and release your workpiece quickly. The jaws of the vise operate without the need for multiple turns of the handle. Tool-free wheel changes let you switch out the cutoff wheel without using an L-key or wrench.

These saws require two 18V DC batteries. Batteries and chargers are not included.

This saw is less than half the weight with a smaller wheel diameter than standard bench-top cutoff saws. Use abrasive wheels with this saw to power through hard materials.

Make burr-free cuts in a variety of materials—from rubber to metal to stone. Made from a blend of silicon carbide and aluminum oxide abrasives, these cutoff wheels won’t clog or burn when slicing through nonmetals. They’re often used to cut hard or thick pipe, sheets, and bars to size.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

From stone to rubber to metal—slice through a variety of materials with the same cutoff saw wheel. Made of silicon carbide and aluminum oxide abrasives, these wheels won’t clog or burn when cutting through nonmetals. Attach them to your bench-top cutoff saw to make burr-free cuts in pipes, bars, and sheets. You shouldn’t use these wheels with handheld saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. Wheels are made of silicon carbide abrasive that is reinforced with a layer of fiberglass mesh.

Type 27 cutoff wheels outperform Type 1 wheels when making flush cuts. Also known as raised-hub and depressed-center cutoff wheels.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Ideal when working across multiple materials, these wheels are specially constructed to cut plastic, fiberglass, concrete, and ceramic, as well as metal. They also work with sheet metal. They contain less than 0.1% iron, chloride, and sulfur contaminants to prevent corroding and discoloring stainless steel and other nickel-alloyed steel.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels have a layer of fiberglass mesh reinforcement.

These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer. Use them with low horsepower (under 20 hp) walk-behind flat saws. Blades with multiple arbor diameters come with a reducer bushing. Choose a narrower width of cut for faster cuts and less material loss.