Overall Length Overall Length |
|---|
|
|
|
Finish Finish |
|---|
|
Material Material |
|---|
|
Drive Style Drive Style |
|---|
 |  |
| External Hex | Slotted |
 |  |
| Phillips | Torx |
For Use In For Use In |
|---|
|
|
Shank Type Shank Type |
|---|
 | Round |
 | SDS Plus |
 | Hex |
 | Quick- Change Hex |
Maximum Drilling Depth Maximum Drilling Depth |
|---|
|
|
|
For Drilling Type For Drilling Type |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Bit Style Bit Style |
|---|
 | Open Spiral Flute |
 | Spiral Flute |
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Masonry Drill Bits
More
Drill Bit Decimal Size Equivalents
More
About Drill Bits
More
Steel Hex Head Tapping Screws for Concrete, Block, and Brick
These blue and silver ultra-corrosion-resistant coated steel screws stand up to wet environments. They have a hex head for a secure grip with a wrench. Drive into a hole with a hammer drill or socket wrench, or use a specialized tool set (sold separately). Pull-out strength and shear strength values are 25% of the ultimate values.
Blue ultra-corrosion-resistant coated screws are also known as Tapcons.
For technical drawings and 3-D models, click on a part number.
Screws | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Head | Strength, lbs. | Hammer Drill Bits | Rotary Drill Bits | ||||||||||||||
| Lg. | Screw Size | Drill Bit Size | Thread Lg. | Min. Install. Dp. | Wd. | Ht. | Pull-Out | Shear | Tested In | Drive Style | Pkg. Qty. | Pkg. | Each | Each | |||
Blue Ultra-Corrosion-Resistant Coated Steel | |||||||||||||||||
3/16" Dia. | |||||||||||||||||
| 1 1/4" | 3/16" | 5/32" | 1 1/4" | 1" | 1/4" | 9/64" | 150 | 180 | 3,000 psi Concrete | Slotted/External Hex | 50 | 000000000 | 00000 | 000000000 | 00000 | 000000000 | 000000 |
| 1 3/4" | 3/16" | 5/32" | 1 5/8" | 1" | 1/4" | 9/64" | 150 | 180 | 3,000 psi Concrete | Slotted/External Hex | 50 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 00000 |
| 2 1/4" | 3/16" | 5/32" | 1 5/8" | 1" | 1/4" | 9/64" | 150 | 180 | 3,000 psi Concrete | Slotted/External Hex | 50 | 000000000 | 00000 | 000000000 | 0000 | 000000 | 00 |
| 2 3/4" | 3/16" | 5/32" | 1 5/8" | 1" | 1/4" | 9/64" | 150 | 180 | 3,000 psi Concrete | Slotted/External Hex | 50 | 000000000 | 00000 | 000000000 | 0000 | 000000 | 00 |
| 3 1/4" | 3/16" | 5/32" | 1 5/8" | 1" | 1/4" | 9/64" | 150 | 180 | 3,000 psi Concrete | Slotted/External Hex | 25 | 000000000 | 00000 | 000000000 | 0000 | 000000 | 00 |
1/4" Dia. | |||||||||||||||||
| 1 1/4" | 1/4" | 3/16" | 1 1/4" | 1" | 5/16" | 3/16" | 190 | 225 | 3,000 psi Concrete | Slotted/External Hex | 50 | 000000000 | 00000 | 000000000 | 0000 | 000000 | 00 |
| 1 3/4" | 1/4" | 3/16" | 1 5/8" | 1" | 5/16" | 3/16" | 190 | 225 | 3,000 psi Concrete | Slotted/External Hex | 50 | 000000000 | 00000 | 000000000 | 0000 | 000000 | 00 |
| 2 1/4" | 1/4" | 3/16" | 1 5/8" | 1" | 5/16" | 3/16" | 190 | 225 | 3,000 psi Concrete | Slotted/External Hex | 50 | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 00000 |
| 2 3/4" | 1/4" | 3/16" | 1 5/8" | 1" | 5/16" | 3/16" | 190 | 225 | 3,000 psi Concrete | Slotted/External Hex | 25 | 000000000 | 0000 | 000000000 | 0000 | 000000000 | 00000 |
| 3 1/4" | 1/4" | 3/16" | 1 5/8" | 1" | 5/16" | 3/16" | 190 | 225 | 3,000 psi Concrete | Slotted/External Hex | 25 | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 00000 |
| 3 3/4" | 1/4" | 3/16" | 1 5/8" | 1" | 5/16" | 3/16" | 190 | 225 | 3,000 psi Concrete | Slotted/External Hex | 25 | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 00000 |
| 4" | 1/4" | 3/16" | 1 5/8" | 1" | 5/16" | 3/16" | 190 | 225 | 3,000 psi Concrete | Slotted/External Hex | 25 | 000000000 | 00000 | 000000000 | 0000 | 000000 | 00 |
| 5" | 1/4" | 3/16" | 1 5/8" | 1" | 5/16" | 3/16" | 190 | 225 | 3,000 psi Concrete | Slotted/External Hex | 10 | 000000000 | 00000 | 000000000 | 0000 | 000000 | 00 |
| 6" | 1/4" | 3/16" | 1 5/8" | 1" | 5/16" | 3/16" | 190 | 225 | 3,000 psi Concrete | Slotted/External Hex | 10 | 000000000 | 00000 | 000000000 | 0000 | 000000 | 00 |
Silver Ultra-Corrosion-Resistant Coated Steel | |||||||||||||||||
1/4" Dia. | |||||||||||||||||
| 1 3/4" | 1/4" | 3/16" | 1 11/16" | 1" | 5/16" | 15/64" | 150 | 150 | 3,000 psi Concrete | External Hex | 25 | 000000000 | 00000 | 000000000 | 0000 | 000000 | 00 |
| 2 1/4" | 1/4" | 3/16" | 2 3/16" | 1" | 5/16" | 15/64" | 150 | 150 | 3,000 psi Concrete | External Hex | 25 | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 00000 |
5/16" Dia. | |||||||||||||||||
| 1 3/4" | 5/16" | 1/4" | 1 3/4" | 1" | 5/16" | 1/4" | 165 | 195 | 3,000 psi Concrete | External Hex | 25 | 000000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
| 3 1/4" | 5/16" | 1/4" | 3 1/4" | 1" | 5/16" | 1/4" | 165 | 195 | 3,000 psi Concrete | External Hex | 10 | 000000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
| 3 3/4" | 5/16" | 1/4" | 3 3/4" | 1" | 5/16" | 1/4" | 165 | 195 | 3,000 psi Concrete | External Hex | 10 | 000000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
| 4" | 5/16" | 1/4" | 4" | 1" | 5/16" | 1/4" | 165 | 195 | 3,000 psi Concrete | External Hex | 10 | 000000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
| 5" | 5/16" | 1/4" | 5" | 1" | 5/16" | 1/4" | 165 | 195 | 3,000 psi Concrete | External Hex | 10 | 000000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
| 6" | 5/16" | 1/4" | 6" | 1" | 5/16" | 1/4" | 165 | 195 | 3,000 psi Concrete | External Hex | 5 | 000000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
Installation Tool Sets for Tapping Screws for Concrete, Block, and Brick
Attach the components of these sets onto a hammer drill to install tapping screws in concrete, block, and brick.
For technical drawings and 3-D models, click on a part number.
| For Screw Dia. | For Drill Bit Size | Includes | Each | |
| 3/16", 1/4" | 1/2", 3/8" | 1/2" dia. × 6" lg. Drive Sleeve, 1/4" Hex Socket, 5/16" Hex Socket, 1/8" Hex Key, Drill Adapter, No. 2 Socket | 000000000 | 0000000 |
| 5/16" | 1/2", 3/8" | 1/8" Hex Key, 7/8" dia. × 6-3/4" lg. Drive Sleeve, Drill Adapter, No. 3 Phillips Bit | 000000000 | 00000 |
Steel Flat Head Tapping Screws for Concrete, Block, and Brick
These blue and silver ultra-corrosion-resistant coated steel screws stand up to wet environments. These screws are beveled under the head for a flush finish in countersunk holes. Drive into a hole with a hammer drill or socket wrench, or use a specialized tool set (sold separately). Pull-out strength and shear strength values are 25% of the ultimate values.
Blue ultra-corrosion-resistant coated anchors are also known as Tapcons.
For technical drawings and 3-D models, click on a part number.
Screws | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Head | Strength, lbs. | Hammer Drill Bits | Rotary Drill Bits | ||||||||||||||
| Lg. | Screw Size | Drill Bit Size | Thread Lg. | Min. Install. Dp. | Dia. | Ht. | Pull-Out | Shear | Tested In | Drive Style | Pkg. Qty. | Pkg. | Each | Each | |||
Blue Ultra-Corrosion-Resistant Coated Steel | |||||||||||||||||
3/16" Dia. | |||||||||||||||||
| 1 1/4" | 3/16" | 5/32" | 1 3/32" | 1" | 3/8" | 0.16" | 150 | 180 | 3,000 psi Concrete | Torx | 50 | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 2 1/4" | 3/16" | 5/32" | 1 5/8" | 1" | 3/8" | 0.16" | 150 | 180 | 3,000 psi Concrete | Torx | 50 | 000000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
| 2 3/4" | 3/16" | 5/32" | 1 5/8" | 1" | 1/2" | __ | 150 | 180 | 3,000 psi Concrete | Phillips | 50 | 000000000 | 00000 | 000000000 | 0000 | 000000 | 00 |
| 3 1/4" | 3/16" | 5/32" | 1 5/8" | 1" | 3/8" | 0.16" | 150 | 180 | 3,000 psi Concrete | Torx | 25 | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
1/4" Dia. | |||||||||||||||||
| 1 1/4" | 1/4" | 3/16" | 1 3/64" | 1" | 1/2" | 0.21" | 190 | 225 | 3,000 psi Concrete | Torx | 50 | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 1 3/4" | 1/4" | 3/16" | 1 35/64" | 1" | 1/2" | 0.21" | 190 | 225 | 3,000 psi Concrete | Torx | 50 | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 2 1/4" | 1/4" | 3/16" | 1 5/8" | 1" | 1/2" | 0.21" | 190 | 225 | 3,000 psi Concrete | Torx | 50 | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 2 3/4" | 1/4" | 3/16" | 1 5/8" | 1" | 1/2" | 0.21" | 190 | 225 | 3,000 psi Concrete | Torx | 25 | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
| 3 3/4" | 1/4" | 3/16" | 1 5/8" | 1" | 1/2" | 0.21" | 190 | 225 | 3,000 psi Concrete | Phillips | 25 | 000000000 | 00000 | 000000000 | 0000 | 000000000 | 000000 |
| 4" | 1/4" | 3/16" | 1 5/8" | 1" | 1/2" | 0.21" | 190 | 225 | 3,000 psi Concrete | Torx | 25 | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 5" | 1/4" | 3/16" | 1 5/8" | 1" | 1/2" | 0.21" | 190 | 225 | 3,000 psi Concrete | Torx | 10 | 000000000 | 00000 | 000000000 | 0000 | 000000 | 00 |
| 6" | 1/4" | 3/16" | 1 5/8" | 1" | 1/2" | __ | 190 | 225 | 3,000 psi Concrete | Phillips | 10 | 000000000 | 00000 | 000000000 | 0000 | 000000 | 00 |
| Installation Tool Set for 3/16" and 1/4" Dia. Screws | 000000000 | Each | 0000000 |
Tapping Screw Assortments for Concrete, Block, and Brick
Also known as Tapcons, these screws are often used to anchor parts to concrete, block, and brick. Screws have a hex head that allows for a secure grip with a wrench. Drive them into a hole with a hammer drill or socket wrench, or use a specialized installation tool (sold separately). Made from ultra-corrosion-resistant coated steel, they resist corrosion in wet environments. Length is measured from under the head.
| Number of Pieces | Hex Head Screws Included | Tools Included | Container Type | Each | |
Blue Ultra-Corrosion-Resistant Coated Steel | |||||
|---|---|---|---|---|---|
For Hammer Drill | |||||
| 176 | 1/4" × 1 1/4" Lg. (50 Pieces) 1/4" × 1 3/4" Lg. (50 Pieces) 1/4" × 2 1/4" Lg. (50 Pieces) 1/4" × 2 3/4" Lg. (25 Pieces) | Drill Bit | Plastic Box | 000000000 | 000000 |
For Rotary Drill | |||||
| 176 | 1/4" × 1 1/4" Lg. (50 Pieces) 1/4" × 1 3/4" Lg. (50 Pieces) 1/4" × 2 1/4" Lg. (50 Pieces) 1/4" × 2 3/4" Lg. (25 Pieces) | Drill Bit | Plastic Box | 000000000 | 00000 |
| Includes | Each | |
| No. 2 Socket 3/16" Hex Socket 1/4" Hex Socket 1/8" Hex Key Drill Adapter 1/2" dia. × 6" lg. Drive Sleeve | 000000000 | 0000000 |
Round-Shank Masonry Drill Bits for Tapping Screw Installation
Each bit is precisely sized to match the tolerances necessary to achieve maximum holding strength from tapping screws. Use with handheld power drills, drill presses, and hammer drills. The shank has a tang which allows it to fit into a drill press with a tapered spindle.
For technical drawings and 3-D models, click on a part number.
Shank | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Screw Size | Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Features | For Use On | Each | |
Inch | |||||||||||
Uncoated Carbide-Tipped Steel | |||||||||||
| 3/16" | 5/32" | 0.1563" | 3 1/2" | 2 1/2" | Round | 5/32" | Standard | Flat on Shank | Masonry, Concrete | 000000000 | 00000 |
| 3/16" | 5/32" | 0.1563" | 4 1/2" | 3 1/2" | Round | 5/32" | Standard | Flat on Shank | Masonry, Concrete | 000000000 | 0000 |
| 3/16" | 5/32" | 0.1563" | 5 1/2" | 4 1/2" | Round | 5/32" | Standard | Flat on Shank | Masonry, Concrete | 000000000 | 0000 |
| 1/4" | 3/16" | 0.1875" | 3 1/2" | 2 1/2" | Round | 5/32" | Standard | Flat on Shank | Masonry, Concrete | 000000000 | 0000 |
| 1/4" | 3/16" | 0.1875" | 4 1/2" | 3 1/2" | Round | 5/32" | Standard | Flat on Shank | Masonry, Concrete | 000000000 | 0000 |
| 1/4" | 3/16" | 0.1875" | 5 1/2" | 4 1/2" | Round | 5/32" | Standard | Flat on Shank | Masonry, Concrete | 000000000 | 0000 |
| 1/4" | 3/16" | 0.1875" | 6 1/2" | 5" | Round | 5/32" | Standard | Flat on Shank | Masonry, Concrete | 000000000 | 0000 |
| 1/4" | 3/16" | 0.1875" | 7 1/2" | 6" | Round | 5/32" | Standard | Flat on Shank | Masonry, Concrete | 000000000 | 0000 |
SDS-Plus-Shank Masonry Drill Bits for Tapping Screw Installation
Each bit is precisely sized to match the tolerances necessary to achieve maximum holding strength from tapping screws. The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers. These bits cannot be used with SDS-Max-drive rotary hammers.
For technical drawings and 3-D models, click on a part number.
| For Screw Size | Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | For Use On | Each | |
Inch | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Uncoated Carbide-Tipped Steel | |||||||||
| 3/16" | 5/32" | 0.1563" | 5" | 2" | SDS Plus | Standard | Masonry, Concrete | 000000000 | 000000 |
| 3/16" | 3/16" | 0.1875" | 4" | 2" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 0000 |
| 3/16" | 3/16" | 0.1875" | 8 1/2" | 6 1/2" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 3/16" | 3/16" | 0.1875" | 10" | 8" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 3/16" | 3/16" | 0.1875" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 3/16" | 3/16" | 0.1875" | 14" | 12" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 7/32" | 7/32" | 0.2188" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 0000 |
| 7/32" | 7/32" | 0.2188" | 10" | 8" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 1/4" | 3/16" | 0.1875" | 7" | 4" | SDS Plus | Standard | Masonry, Concrete | 000000000 | 00000 |
| 1/4" | 1/4" | 0.25" | 4" | 2" | SDS Plus | Standard | Masonry, Concrete | 000000000 | 0000 |
| 1/4" | 1/4" | 0.25" | 8 1/2" | 6 1/2" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 0000 |
| 1/4" | 1/4" | 0.25" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 1/4" | 1/4" | 0.25" | 14" | 12" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 5/16" | 1/4" | 0.25" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 000000000 | 00000 |
| 5/16" | 5/16" | 0.3125" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 0000 |
| 5/16" | 5/16" | 0.3125" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 3/8" | 3/8" | 0.375" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 0000 |
| 3/8" | 3/8" | 0.375" | 10" | 8" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 3/8" | 3/8" | 0.375" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 3/8" | 3/8" | 0.375" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 3/8" | 3/8" | 0.375" | 24" | 22" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 7/16" | 7/16" | 0.4375" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 7/16" | 7/16" | 0.4375" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 7/16" | 7/16" | 0.4375" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 1/2" | 1/2" | 0.5" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 1/2" | 1/2" | 0.5" | 10" | 8" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 1/2" | 1/2" | 0.5" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 1/2" | 1/2" | 0.5" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 1/2" | 1/2" | 0.5" | 24" | 22" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 9/16" | 9/16" | 0.5625" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 9/16" | 9/16" | 0.5625" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 9/16" | 9/16" | 0.5625" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 5/8" | 5/8" | 0.625" | 8" | 6" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 5/8" | 5/8" | 0.625" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 5/8" | 5/8" | 0.625" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 5/8" | 5/8" | 0.625" | 24" | 22" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 3/4" | 3/4" | 0.75" | 8" | 6" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 3/4" | 3/4" | 0.75" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 3/4" | 3/4" | 0.75" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 3/4" | 3/4" | 0.75" | 24" | 22" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 27/32" | 27/32" | 0.8438" | 8" | 6" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 7/8" | 7/8" | 0.875" | 8" | 6" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 7/8" | 7/8" | 0.875" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 1" | 1" | 1" | 10" | 8" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 1" | 1" | 1" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 1 1/8" | 1 1/8" | 1.125" | 10" | 8" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
| 1 1/8" | 1 1/8" | 1.125" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
Drive Sleeves for Hex-Shank Masonry Drill Bits for Tapping Screw Installation
Drive a tapping screw without removing the drill bit from your impact driver. One end engages with the hex-collar on the drill bit, while the other end holds a screwdriver bit.
For Shank | |||||
|---|---|---|---|---|---|
| Type | Size | Overall Lg. | Material | Each | |
| Hex | 1/4" | 6" | Black-Oxide High-Speed Steel | 0000000 | 000000 |
Hex-Shank Masonry Drill Bits for Tapping Screw Installation
Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks. Each is precisely sized to match the tolerances necessary to achieve maximum holding strength from tapping screws. They have a built-in hex collar that acts as a stop for repeatable drilling depths. The split point keeps the bit centered without a pilot hole.
A drive sleeve (sold separately) slides over the drill bit to drive fasteners without removing the drill bit from the tool. One end engages with the hex-collar on the drill bit, while the other end holds a screwdriver bit.
For technical drawings and 3-D models, click on a part number.
Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Screw Size | Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | For Use On | Each | |
Black-Oxide Carbide-Tipped Steel | ||||||||||
| 3/16" | 5/32" | 0.1563" | 4" | 1.60" | Quick-Change Hex | 1/4" | Split | Masonry | 0000000 | 00000 |
| 3/16" | 5/32" | 0.1563" | 5" | 2.55" | Quick-Change Hex | 1/4" | Split | Masonry | 0000000 | 0000 |
| 1/4" | 3/16" | 0.1875" | 4" | 1.70" | Quick-Change Hex | 1/4" | Split | Masonry | 0000000 | 0000 |
| 1/4" | 3/16" | 0.1875" | 5" | 2.60" | Quick-Change Hex | 1/4" | Split | Masonry | 0000000 | 0000 |
| 1/4" | 3/16" | 0.1875" | 6" | 3.85" | Quick-Change Hex | 1/4" | Split | Masonry | 0000000 | 0000 |
For Shank | |||||
|---|---|---|---|---|---|
| Type | Size | Overall Lg. | Material | Each | |
| Hex | 1/4" | 6" | Black-Oxide High-Speed Steel | 0000000 | 000000 |