Check a solution’s electrical conductivity to indicate the concentration of salts, nutrients, chemicals, and other substances. This meter is often used to test wastewater, boiler condensate, aquaculture solutions, and other dirty liquids. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration adjustment screw to maintain accuracy.

Transmit pH readings to a PC for analysis. This meter has a sensor on a 3-ft. cable for taking remote readings of water and other clean liquids. It has automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate readings in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

Check pH in harsh field conditions. These floating meters that have a housing that meets IP67 for complete resistance to dust and protection from temporary submersion. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a calibration solution and the calibration button to maintain accuracy. Meters do not include Calibration Solution.

Meter for clean liquids is commonly used in pools and hydroponic solutions.

Meter for dirty liquids stands up to wastewater, plating bath solutions, and other harsh liquids.

The remote sensor with a cable lets you take pH readings in hard-to-reach areas. Use a Calibration Solution and the calibration button to maintain accuracy. Meter for dirty liquids includes calibration solution; meter for clean liquids does not include calibration solution.

Nonglass sensors are more durable and resistant to breakage than glass sensors.

Meter for clean liquids is often used to check water quality.

Meter for dirty liquids stands up to use in petrochemical, environmental, and agricultural testing. The water-resistant housing meets IP65 for protection from dust and temporary submersion.

Since these meters float and have a housing that meets IP67, they won’t be damaged by temporary submersion and have complete resistance to dust. They detect total dissolved solids (TDS) in water, hydroponic solutions, and other clean liquids to determine contaminant levels. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

Check your system for contaminants with this meter that detects total dissolved solids (TDS) in aquaculture solutions, wastewater, and other dirty liquids. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration adjustment screw to maintain accuracy.

Since this oxidation reduction potential (ORP) meter has a housing that meets IP67 for complete resistance to dust and protection from temporary submersion, it’s often used to determine a solution’s ability to break down contaminants in harsh field conditions. For use with dirty liquids containing heavy metals, sulfides, and harsh chemicals, this meter is often used for wastewater treatment. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

The remote probe on a 3-ft. cable limits your exposure when taking total dissolved solids (TDS) measurements to determine contaminant levels in aquaculture solutions, boiler condensate, contaminated water, and other dirty liquids. This meter has automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

Test three different water-chemistry measurements in dirty, wet conditions. These meters have a housing that meets IP57 for good resistance to dust and protection from temporary submersion. Often used in pools and spas, they are for clean liquids. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

Chlorine, oxidation reduction potential (ORP), and pH meter comes with three sensors that each take one chemistry measurement.

Conductivity, salinity, and total dissolved solids (TDS) meter comes with one sensor that takes all three chemistry measurements.

Check the pH and conductivity of water and other clean liquids with one bench-top device. This meter has automatic temperature compensation that standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration knob to maintain accuracy.

Upload up to 500 conductivity and total dissolved solids (TDS) readings to a PC. This meter has a probe on a 3-ft. cable for taking readings in hard-to-reach areas. It's for use with tap water, pool water, hydroponic solutions, and other clean liquids. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Data hold freezes the current reading on the display. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

Remote sensors let you take pH and oxidation reduction potential (ORP) readings up to 3 feet from the display. For use with clean liquids, this meter is often used for water-quality testing. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

Don’t strain your eyes reading a scale—these bench-top meters indicate exact results on the digital display. For complete resistance to dust and protection from temporary submersion, these meters float and have a housing that meets NEMA 6 and IP67. They're for use with water and other clean liquids. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures. Use a Calibration Solution (not included) and the calibration button to maintain accuracy.

The same controller can actuate equipment based on pH or oxidation reduction potential (ORP). Attach pH and ORP sensors (not included) and set the current measurement type with the selection switch. Controllers turn equipment on or off when the reading reaches the actuation point. They have one control relay and two alarm relays. Relays are single pole, double throw (SPDT) and can be set to turn one circuit from “off” to “on” (normally open) or from “on” to “off” (normally closed). Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures.

Controller with LED display is more visible in low-light conditions than controller with LCD display.

Turn pumps, mixers, valves, and other equipment on or off based on the pH or conductivity of a solution. These controllers compare input from a sensor (sold separately) to a programmed actuation point and turn equipment on or off when the reading reaches the actuation point. They have two control relays. Automatic temperature compensation standardizes readings at 77° F to prevent inaccurate results in fluctuating temperatures.

Controllers for testing pH also require an adapter.

Test for contaminants before installing water-treatment equipment such as boilers and filters. You can also check your pipes and equipment for improper chemical levels that can cause corrosion and scale buildup, shortening their life.

340-test kits include tests for monitoring municipal water, which is often treated with chlorine.

290-test kits include tests that help you monitor well water, which often contains sulfur compounds.