Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable. This sleeving is often used in motors, transformers, and generators. Made of coated fiberglass, it resists abrasion, acids, alkalies, and chemicals.

Vinyl-coated sleeving resists wax and alcohol. Sleeving is flame-rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material.

This sleeving is often used to insulate connections in transformers, relays, and solenoids. It prevents electricity and heat from dissipating from wire and cable. When exposed to flame, it will self-extinguish and produce a nonconductive ash. It’s flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material. Made of silicone-coated fiberglass, it resists chemicals.

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. A sewn-in ground wire dissipates any stored charge. It provides good protection against abrasion. Wrap it around wire and cable without disconnecting them; sleeving has a slit along the entire length. Sleeving with an adhesive strip closure is permanently sealed when the adhesive is applied. Sleeving with foil shielding is for use in stationary applications. Repeated flexing will damage the foil. Polyurethane rubber sleeving provides excellent resistance to solvents, oil, and grease.

Flame rated VW-1 sleeving meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.

Coated with PVC, this polyester sleeving resists chemicals and solvents. It’s flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material. Sleeving meets MIL-C-43006 for material quality. Wrap it around wire, cable, and hose without disconnecting them. It has a slit along the entire length that permanently seals with the adhesive strip.

Also known as metal clad (MC) cable, this cable has metal armor that acts as conduit to protect the building wires. It's often used along the exterior of walls to carry power to outlet boxes. It has a ground wire that is not counted in the number of wires.

Hazardous location environmental ratings indicate whether manufacturers have included safety features in products to facilitate their safe use in a hazardous environment. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Cable with THHN wire stands up to condensation and moisture in basements and other damp environments.

For technical drawings and 3-D models, click on a part number.

Also known as AC cable, this cable has an uninsulated aluminum ground wire that's in constant contact with the aluminum armor, so it can be used for bonding and grounding. The uninsulated ground wire is not counted in the number of wires. The armor acts as conduit to protect the THHN building wires. It's often used along the exterior of walls to carry power to outlet boxes. All are flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material.