For Use With For Use With |
|---|
Faucet Washers
PTFE washers absorb less water so they're more durable than SBR washers.
| Trade Size | Industry Designation | OD | Temp. Range, °F | Pkg. Qty. | Pkg. | |
Flat | ||||||
|---|---|---|---|---|---|---|
SBR Rubber | ||||||
| 1/4" (00) | Small | 1/2" | -30° to 200° | 100 | 0000000 | 000000 |
| 1/4" (0) | Medium | 17/32" | -30° to 200° | 100 | 0000000 | 00000 |
| 1/4" | Regular | 9/16" | -30° to 200° | 100 | 0000000 | 00000 |
| 1/4" | Large | 19/32" | -30° to 200° | 100 | 0000000 | 00000 |
| 3/8" | Regular | 5/8" | -30° to 200° | 100 | 0000000 | 00000 |
| 3/8" | Large | 11/16" | -30° to 200° | 50 | 0000000 | 00000 |
| 1/2" | Regular | 3/4" | -30° to 200° | 50 | 0000000 | 00000 |
PTFE Plastic | ||||||
| 1/4" (00) | Small | 1/2" | -100° to 500° | 25 | 0000000 | 0000 |
| 1/4" (0) | Medium | 17/32" | -100° to 500° | 25 | 0000000 | 00000 |
| 1/4" | Regular | 9/16" | -100° to 500° | 25 | 0000000 | 00000 |
| 1/4" | Large | 19/32" | -100° to 500° | 25 | 0000000 | 00000 |
| 3/8" | Regular | 5/8" | -100° to 500° | 25 | 0000000 | 00000 |
| 3/8" | Large | 11/16" | -100° to 500° | 10 | 0000000 | 0000 |
| 1/2" | Regular | 3/4" | -100° to 500° | 10 | 0000000 | 0000 |
Beveled | ||||||
SBR Rubber | ||||||
| 1/4" (00) | Small | 1/2" | -30° to 200° | 100 | 0000000 | 00000 |
| 1/4" (0) | Medium | 17/32" | -30° to 200° | 100 | 0000000 | 00000 |
| 1/4" | Regular | 9/16" | -30° to 200° | 100 | 0000000 | 00000 |
| 1/4" | Large | 19/32" | -30° to 200° | 100 | 0000000 | 00000 |
| 3/8" | Regular | 5/8" | -30° to 200° | 100 | 0000000 | 00000 |
| 3/8" | Large | 11/16" | -30° to 200° | 50 | 0000000 | 00000 |
| 1/2" | Regular | 3/4" | -30° to 200° | 50 | 0000000 | 00000 |
Faucet Washer Assortments
PTFE washers absorb less water so they're more durable than SBR washers.
| Material | No. of Pieces | Temp. Range, °F | Includes | Each | |
Flat | |||||
|---|---|---|---|---|---|
| SBR Rubber | 200 | -30° to 200° | 7 Sizes: 1/4" Small (00), 1/4" Medium (0), 1/4" Regular, 1/4" Large, 3/8" Regular, 3/8" Large, 1/2" Regular | 0000000 | 000000 |
| PTFE Plastic | 240 | -100° to 500° | 9 Sizes: 000, 1/4" Small (00), 1/4" Medium (0), 1/4" Regular, 1/4" Large, 3/8" Regular, 3/8" Medium, 3/8" Large, 1/2" Regular | 0000000 | 000000 |
Beveled | |||||
| SBR Rubber | 200 | -30° to 200° | 7 Sizes: 1/4" Small (00), 1/4" Medium (0), 1/4" Regular, 1/4" Large, 3/8" Regular, 3/8" Large, 1/2" Regular | 0000000 | 00000 |
Sealing Grommets
Trim the center of these grommets to the size you need for a tight seal around wire, cable, and cords. Use them to keep out dust, debris, and moisture. Made of nitrile, all are abrasion, oil, and grease resistant. Use their aluminum flange to secure them to surfaces with screws. They can be used outdoors.
For technical drawings and 3-D models, click on a part number.
Mechanical Shaft Seals
Commonly used in mixing and grinding equipment, conveyors, and construction machinery, these seals withstand exposure to abrasive material. Their metal-to-metal sealing surface provides durability for long-term service in heavily contaminated environments. Seals have two highly-polished iron rings secured by diamond-shaped O-rings that make a tight seal against the housing.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Bore | Seal | O-Ring | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Dia. | Single Side Wd. | O'all Wd. | For Max. Shoulder Dia. | ID | OD | Wd. | O'all Wd. | Max. Speed, rpm | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Each | |
Cast Iron with Buna-N Rubber O-Ring | |||||||||||||||
| 2 1/8" | 3.250" | 0.418" | 0.900" | 2.759" | 2.215" | 3.250" | 0.812" | 0.900" | 600 | 35 | -10° to 212° | Durometer 80A (Hard) | Black | 0000000 | 0000000 |
| 2 1/2" | 3.762" | 0.422" | 0.907" | 3.188" | 2.580" | 3.762" | 0.840" | 0.907" | 515 | 35 | -10° to 212° | Durometer 80A (Hard) | Black | 0000000 | 000000 |
| 2 3/4" | 4.030" | 0.426" | 0.918" | 3.480" | 2.830" | 4.030" | 0.810" | 0.918" | 470 | 35 | -10° to 212° | Durometer 80A (Hard) | Black | 0000000 | 000000 |
| 3 1/16" | 4.500" | 0.475" | 1.016" | 3.833" | 3.170" | 4.500" | 0.912" | 1.016" | 420 | 35 | -10° to 212° | Durometer 80A (Hard) | Black | 0000000 | 000000 |