Thick side plates allow this chain to handle greater capacity than standard chain.

This treated steel chain has over eight times the capacity of stainless steel chain.

With oil-embedded bushings and oil-coated pins, this chain is self-lubricating, which means it requires less maintenance than standard ANSI roller chain.

This self-lubricating nickel-plated steel chain has better corrosion resistance than steel chain and does not require regular maintenance.

This chain is made of steel.

Made of stainless steel, this chain has excellent corrosion resistance.

Made of stainless steel, this chain has excellent corrosion resistance.

Also known as leaf chain and counterbalance chain, this chain is used with pulleys rather than sprockets for low-speed pulling and as counterweight chain for machine tools, elevator and oven doors, and forklift masts.

Made of treated steel, these links offer increased corrosion resistance over steel attachment links.

Keep an assortment of extra steel links on hand for maintenance and repairs. Assortments include connecting, adding, and adding-and-connecting links.

Made of stainless steel, this chain has excellent corrosion resistance.

Connect attachments to this metric chain without disassembling it. In addition to letting you add attachments with extension pins or rods for conveyance or elevation applications, the hollow pins on this chain weigh less than standard pins.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.

Also known as lap links or repair links.

Often used with transport chain, these links are good for binding, tying down, and pulling loads.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Once secured with the included locking pin, these links must be cut off to be removed.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

Use these links for general lifting applications.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

The pins have flush ends to prevent snagging and accidental disengagement.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

A lip on the shackle keeps the screw from falling out when loosened.

For use in low-vibration applications where the shackle remains stationary.

Minimize twisting and knotting of rope and chain.

A lip on the shackle keeps the pin from falling out when loosened.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Attach a rope to the ring on the pin for remote release where access in limited. These shackes have a clevis end for making pivoting connections.

Thread chain through the hole of these links to form an adjustable loop or connect chain ends to form a longer chain.

Mount these links in a drilled hole to secure small items such as pens. Links can also be attached as the end of a pull chain.