Configure a connector for your application—combine housings with pins and sleeves for different wire sizes. Use them with standard Molex connectors.

Configure a connector for your application by combining housings with pins and sleeves for different wire sizes. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Assemble a connector that can handle multiple applications at once. Combine inserts that send power, signal, and data with a base and a hood.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Also known as bullet terminals, these have a round tab that requires less space than the flat tab found on most quick-disconnect terminals.

These pins combine the locking capabilities of a clevis pin with the precision diameter of a dowel pin for a tight fit.

Also known as universal clevis pins, these pins have holes on 1/4" centers so you can change the length by moving the cotter pin.

Install or remove these pins from either side.

These pins have multiple through holes; change the length by moving the cotter pin. The bend makes them easy to insert and pull out.

Easier to install and remove than standard clevis pins, these pins have a ring-grip handle.

These one-piece fasteners lock in place with a toggle. Flip the toggle to release the pin.

Also known as gravity pins, these pins fit in holes on telescoping tubing to adjust the length.

Spring force holds pieces of telescoping tubing together. Also known as snap buttons and tubing buttons.

The wire retainer snaps closed to secure the pin for a one-piece alternative to a clevis and cotter pin combination. Also known as PTO pins.

Slide a retaining ring into the groove for a secure hold that takes up less space than a cotter pin.

Join two pieces of wood with these dowel pins. When glued, they expand for a tight fit.

Use these as pivot or hinge pins. The knurled half locks pins in position, while the smooth half acts as a pivot.

The full length of these pins is knurled for a tight grip that won't spin.

Plastic pins are a nonconductive and nonmagnetic alternative to metal dowel pins. Use them as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts.

Slip these pins in and out during maintenance or prototyping—they’re undersized to make alignment easier.

Pass wires and other components through these hollow pins.

Barbs bite into plastics and soft metals such as aluminum for a strong hold, and a round head gives a finished appearance.

Center-groove pins are often used in place of clevis pins or to create T-handles. The grooved center locks pins in position, while the smooth ends act as a pivot. Also known as type E pins.

The flat side of these pins relieves trapped air, making them easier to insert in and remove from blind holes. To remove, thread a screw or tool into the tapped hole, then pull the pin out.

Grooves hold these pins in place, and a round head gives them a finished appearance.

These pins are commonly used as anchors for tension springs. The grooved half locks pins in position, and spring ends fit in to the notch. Also known as type G pins.

The smooth ring handle on these pins won't catch on parts. The shoulder keeps a portion of the pin outside the hole and makes them easy to grab.

These pins have a low-profile head, so they won't get knocked out of place. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

Add a knob or handle to the threaded shank. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

A high-profile knob is easy to grip, but fits in small spaces. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

A T-handle makes these pins easy to grip. The shoulder keeps a portion of the pin outside the hole and makes them easy to grab.

The extra height and smaller width of the grip make the button more accessible in tight spaces. For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

For the tightest spaces, these narrow-grip pins have the smallest heads of any of our locking quick-release pins. They lock in place until you push the button to release the spring-loaded retaining balls.

The extra height and smaller width of the grip make the button more accessible in tight spaces. Made entirely of stainless steel, they stand up to corrosive enviroments. Pins lock in place until you push the button to release the spring-loaded retaining balls.

Four spring-loaded retaining balls provide extra holding power. Made entirely of stainless steel, these pins stand up to corrosive enviroments. They lock in place until you push the button to release the spring-loaded retaining balls.

A recessed button prevents accidental pin removal. These all-stainless steel pins stand up to corrosive environments. They lock in place until you push the button to release the spring-loaded retaining balls.

Attach these pins to a machine cover or access panel, then clip them in to receptacles installed in the enclosure for quick access. Pins lock in place until you release them.

To insert and remove these pins, press the button, then flip the lever to release the spring-loaded retaining balls. Two-step locking prevents accidental removal.

Also known as roll, tension, split, and expansion pins, these pins have a slot along one side that you squeeze closed to install them into unthreaded holes.

For tough jobs, these spiral pins are 30% stronger than our standard coiled spring pins. They remain flexible after installation to absorb shock and vibration, and work well in holes that are out of round.

Slotted spring pins are also known as roll, tension, split, and expansion pins. Because the slot is pressed closed when the pins are inserted, they don't flex after installation.

Coiled spring pins are flexible after installation, so they absorb shock and vibration better than slotted spring pins. They also have higher dynamic load capacities and accommodate wider hole tolerances.