Make lightweight connections without the hassle of matching the exact thread type—these fittings connect to NPT, NPTF, BSPP, BSPT, and other universal threads.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

Made of brass, these fittings have good corrosion resistance.

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.

Use at pressures up to 250 psi.

Withstanding temperatures up to 300° F, these fittings have the highest temperature rating of all our push-to-connect tube fittings for air and water.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Monitor flow with these clear fittings.

The nickel plating on these fittings provides better corrosion resistance than unplated brass fittings.

Color-code fittings for easy identification. These aluminum fittings have good corrosion resistance, but are lighter in weight than brass.

Fittings have good corrosion resistance.

Made of plastic, these couplings are lighter in weight than metal quick-turn couplings.

A built-in shut-off valve stops the flow when the coupling is separated, so there’s no need to worry about air or water spilling from your line. Couplings are plastic, which is lighter in weight than metal couplings.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

Use these sleeves with brass compression nuts and fittings to create a seal on plastic and rubber tubing.

Use these O-rings with brass compression tube fittings that have BSPP male threads. They create a seal on the BSPP male threads to guard against leaks.

A built-in tube support slips inside the tubing to prevent collapsing and provides a sturdy connection for an extra-tight seal.

Tube supports slip inside tubing to prevent the walls from collapsing.

Lighter in weight than their metal counterparts, these compression fittings are polypropylene.

Lighter in weight than metal quick-disconnect couplings, these couplings are plastic.

With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Connect quick-clamp fittings in high-vacuum applications.

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

Made of plastic, these sleeves create a strong seal without damaging tubing.

These fittings have the highest pressure rating of all the Yor-Lok tube fittings we offer.

The male pipe threads on these fittings have a sealant applied for extra protection against leaks.

Individually bagged to prevent contamination, these fittings are suitable for applications that require a high level of cleanliness.

The threads on the tube end of these fittings are Class 3A or 3B and adhere to tighter tolerances than other 37° flared fittings.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.

Use these sleeves with compression nuts and fittings to create a strong seal on stainless steel tubing.

Pair these nuts with vibration-resistant compression sleeves and fittings for a strong seal on stainless steel tubing.

The thick walls of these fittings can withstand more than twice the pressure of standard compression fittings.