Bolt these fittings onto your ultra-high-vacuum chamber to transfer liquids and gases inside. Also known as feedthroughs, they come assembled with a flanged (CF) fitting, metal tubing, and two Yor-Lok tube fittings. Their bolt-together connection forms the tightest seal of any fitting type, so you can use them in semiconductor manufacturing, surface analysis experiments, and even research with particle accelerators. Made of stainless steel and copper, these fittings resist rusting. These fittings are not for use in pressure applications.

To complete the flanged connection, you’ll need a gasket and bolt kit (each sold separately). The Yor-Lok fittings on each end include a nut and two sleeves that grip your system’s stainless steel tubing.

To maintain the temperature of liquids as cold as -325° F, this hose has vacuum insulation and a reflective barrier. This prevents heat transfer in the same way a thermos does, so the exterior of the hose won’t freeze or form condensation. Even when used with liquid argon, liquid carbon dioxide, liquid methane, and liquid nitrogen, this hose is safe to handle. It meets strict ASME design and testing standards for process piping systems.

This hose comes ready to use—you don’t need to create the vacuum yourself. To install, thread the fittings on this hose onto a freezer or other equipment in your plant or laboratory. Both ends swivel until tightened, so you don’t need to rotate the entire hose during installation. With ribbed insulation inside and spiral reinforcement outside, this hose won’t crack or leak when you bend and flex it around obstacles. The cover is 304 stainless steel, which stands up to wear and tear and won’t corrode from mild chemicals and water.

Sealed vacuum insulation and a reflective barrier inside this hose maintains the temperature of liquids as cold as -325° F. Similar to a thermos, this prevents heat transfer, so the exterior of the hose won’t freeze or form condensation. This hose is safe to handle, even when used with liquid nitrogen, liquid argon, liquid carbon dioxide, and liquid methane. It meets strict ASME design and testing standards for process piping systems.

The tube stems on each end slide into tube fittings on a freezer or other equipment in your plant or laboratory. With ribbed insulation inside and spiral reinforcement outside, this hose won’t crack or leak when you bend and flex it around obstacles. The cover is 304 stainless steel, which stands up to wear and tear and won’t corrode from mild chemicals and water.