About Fire-Fighting Hose Threads
More
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Diverting Valves with Fire-Fighting Hose Fittings
- Valve Type: Ball
- For Use With: Water
- Seal Material: Buna-N Rubber
Control the flow of water in two directions from a single source—these diverting valves have two balls and handles for independent operation of each outlet. They can direct flow to one side outlet at full capacity while shutting off flow to the second side outlet, direct flow to both side outlets at reduced capacity, or shut off flow to both side outlets. Valves have a brass body for good corrosion resistance. They are for use with fire-fighting hose.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads.
For technical drawings and 3-D models, click on a part number.
| Inlet Fire Hose Trade Size | Outlet Fire Hose Trade Sizes | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | End-to-End Lg. | Each | |
Brass Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 1/2 | 1 1/2 × 1 1/2 | Y-Pattern | Not Rated | 300 psi @ 150° F | -20° to 150° | 5 5/8" | 000000 | 0000000 |
Fire-Fighting Hose Fittings
Connect these fittings to fire hydrants and washdown equipment. Made of brass, they have good corrosion resistance. Some have a hex in the middle so you can tighten them with a wrench.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads. Male NPSH (National Pipe Straight Hose) threads are compatible with female NPSH threads. Female NPSH threads are compatible with male NPSH, NPT, NPTF, and NPSM threads. BIT (British Instantaneous Thread) threads are commonly used in the United Kingdom, Ireland, India, Hong Kong, and parts of Canada. They’re also known as John Morris couplings.
For technical drawings and 3-D models, click on a part number.
| Fire Hose Trade Size | Pipe Size  | Material | Each | |
| 1 1/2 | 1 1/2 | Brass | 0000000 | 000000 |
| Fire Hose Trade Size | Pipe Size | Material | Each | |
| 1 1/2 | 1 1/2 | Brass | 0000000 | 000000 |
| Fire Hose Trade Size | Pipe Size | Material | Each | |
| 2 1/2 | 2 1/2 | Brass | 0000000 | 0000000 |
| Pipe Size | Fire Hose Trade Size | Material | Each | |
| 1 1/2 | 1 1/2 | Brass | 0000000 | 000000 |
| Pipe Size | Fire Hose Trade Size | Material | Each | |
| 2 1/2 | 2 1/2 | Brass | 0000000 | 0000000 |
Fire Hose Trade Size | ||||
|---|---|---|---|---|
| (A) | (B) | Material | Each | |
| 2 1/2 | 1 1/2 | Brass | 0000000 | 0000000 |
Fire Hose Trade Size | ||||
|---|---|---|---|---|
| (A) | (B) | Material | Each | |
| 1 1/2 | 2 1/2 | Brass | 0000000 | 000000 |
Pin-Lug Fire-Fighting Hose Fittings
The pin lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment. Tighten with a hook-style spanner wrench (sold separately). All are brass for good corrosion resistance.
Fittings that swivel until tightened rotate to help prevent kinking during installation.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads.
For technical drawings and 3-D models, click on a part number.
| Fire Hose Trade Size | Pipe Size | Material | Each | |
| 1 1/2 | 1 1/2 | Brass | 0000000 | 000000 |
| Fire Hose Trade Size | Pipe Size | Material | Each | |
| 1 1/2 | 1 1/2 | Brass | 0000000 | 000000 |
| Pipe Size | Fire Hose Trade Size | Material | Each | |
| 1 1/2 | 1 1/2 | Brass | 0000000 | 000000 |
| Fire Hose Trade Size | Material | Each | |
| 2 1/2 | Brass | 0000000 | 0000000 |
| Fire Hose Trade Size (A) | Pipe Size (B) | Material | Each | |
| 2 1/2 | 2 | Brass | 0000000 | 0000000 |
| Pipe Size (A) | Fire Hose Trade Size (B) | Material | Each | |
| 2 | 2 1/2 | Brass | 0000000 | 0000000 |
Rocker-Lug Fire-Fighting Hose Fittings
The rocker lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment. Tighten with a hook-style spanner wrench (sold separately). Fittings are brass for good corrosion resistance.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads. Male NPSH (National Pipe Straight Hose) threads are compatible with female NPSH threads. Female NPSH threads are compatible with male NPSH, NPT, NPTF, and NPSM threads.
For technical drawings and 3-D models, click on a part number.
| Fire Hose Trade Size | Pipe Size | Material | Each | |
| 1 1/2 | 1 1/2 | Brass | 0000000 | 000000 |
| Fire Hose Trade Size (A) | Pipe Size (B) | Material | Each | |
| 1 1/2 | 2 1/2 | Brass | 0000000 | 000000 |
| Pipe Size (A) | Fire Hose Trade Size (B) | Material | Each | |
| 1 1/2 | 2 1/2 | Brass | 0000000 | 000000 |
