Compact and easy to carry, these lights are IP44 rated for protection against splashing water from all angles. The head adjusts up and down to direct light where it's needed. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a neutral white light that's often found in workspaces. They have an impact-resistant plastic lens to protect the bulb.

This IP07 rated light withstands temporary submersion in a maximum of one meter of water for up to 30 minutes. It's compact for easy transport to job sites with no electrical power. With a head that adjusts up and down, it floods your job site with light. It has a hook and a magnet for mounting, so you can keep your hands free for other work. This light has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. It has a durable tempered-glass lens to protect the LEDs.

Note: Battery life is significantly reduced when lights are used at the high-beam setting.

For use in dry environments, this easy-to-carry light is small but bright. Adjust the head up and down to flood your job site with light. With a halogen bulb, this floodlight casts a cool light that highlights white/blue tones, which is good for inspecting. It has a steel guard to protect its durable glass lens from accidential contact. This light cannot be sold in California.

An adjustable head moves up and down to let you aim light where it's needed most. This floodlight is small and easy to carry to job sites that don't have electrical power service. It has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a cool light that highlights white/blue tones, which is good for inspecting. This light has an impact-resistant plastic lens to protect the LEDs.

A series of bulb heads are attached to a power cord to provide overhead lighting for jobsites. The cord has a plug on one end and a female connector on the other end, so you can connect multiple strings to illuminate larger areas.

Style A lights are compatible with medium-base, screw-in CFL (compact fluorescent), incandescent, and LED bulbs (sold separately). They have a plastic-coated steel guard to protect the bulb.

Style B has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting. For use in wet environments, there is a seal between the lens and the housing to keep out dripping, splashing, and falling liquids.

Hang these lights where you need them on the job site.

Styles A-E come with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light that highlights white/blue tones, which is good for inspecting. The LEDs in styles A, B, C, and E are built-in, while style D comes with a replaceable LED bulb. All have an impact-resistant plastic lens to protect the LEDs.

Style F clips onto surfaces up to 3" thick. It is furnished with a replaceable halogen bulb that casts a warm, yellow-tone light that’s similar in appearance to incandescent bulbs. It has a durable glass lens to protect the bulb, along with a vinyl-coated steel guard to protect the lens.

Styles G, H, and J lights are furnished with replaceable fluorescent bulbs. They produce a cool light that highlights white/blue tones, which is good for inspecting. Fluorescent lights last longer and generate less heat than halogen lights. All have an impact-resistant plastic lens to protect the bulb. Style G lights also meet NSF/ANSI 2 standards for food equipment.

Style K comes with a replaceable incandescent bulb. It has an impact-resistant plastic lens to protect the bulb.

Styles L, M, and N are compatible with medium-base screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately), except 1550k33 is compatible with medium-base screw-in incandescent and LED bulbs. Styles L and M have a steel guard to protect the bulb. Style N has an impact-resistant plastic lens.

Style P is compatible with medium-base screw-in CFL (compact fluorescent), incandescent, and LED bulbs (sold separately). They accommodate a spot or flood bulb.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. Lights produce a cool light appearance that highlights white/blue tones, which is good for inspecting. For indoor and outdoor use.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of the lights have a hook for hanging when you need both hands for other work.

Styles A and B lights are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately). They have a zinc-plated steel guard to protect the bulb.

Style C lights are furnished with an incandescent bulb and an impact-resistant plastic lens.

Styles D and E lights have built-in LEDs that last longer, are more effiecent, and generate less heat than other light technologies. They cast a cool light that highlights white/blue tones, which is good for inspecting. They have an impact-resistant plastic lens to protect the LEDs.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They have an impact-resistant plastic lens to protect the LEDs.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They have an impact-resistant plastic lens to protect the LEDs.

Style A casts a neutral light that's consistent with the type of light often found in workspaces.

Style B casts a cool light that highlights white/blue tones, which is good for inspecting. It comes with a pistol-grip handle and a clamp attachment; swap-out the handle for the clamp when you need your hands free for other work.

Bring light to areas that don't have electrical power service. This light has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a neutral white light that's often found in workspaces. This light has an impact-resistant plastic lens to protect the LEDs. This light cannot be sold in California or Oregon.

Use these with portable lights that use screw-in bulbs. They are not for use with insulated, wet-location, or hazardous location portable lights.

These LED lights are rated for environments where hazardous material is present. They have a tempered glass lens to protect the bulb.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment. See About Hazardous Location Environmental Ratings.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight. NEMA 4X is widely considered the standard NEMA rating. These lights are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

PTFE plastic lenses are impact resistant.

Tempered glass lenses are more durable than plastic lenses; they have a zinc-plated steel guard to protect them.

Because these lights have a reflector, they distribute light more evenly than other portable lights. A mounting clip at the base lets you attach them to nearby surfaces.

Style A and B are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

Style C comes with an LED bulb; however, is also compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and infrared bulbs.

Provide 360° of lighting with these lanterns. They cast a cool light that highlights white/blue tones, which is good for inspecting.

Style A has a rubber base and handle, which stands up to impact better than plastic. It’s furnished with a CFL (compact fluorescent) bulb, which takes several seconds to reach full brightness.

Style B is rated IP07 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. It has built-in LEDs that last longer, are more efficient, and generate less heat than CFL bulbs. The handle folds down when not in use for compact storage.

Style C is rated IP04 to withstand liquid splashed from all angles. It has built-in LEDs that last longer, are more efficient, and generate less heat than CFL bulbs.

Note: Battery life is significantly reduced when lanterns are used at the high-beam setting.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction. They have a rubber lip that molds around bulbs to form a water-resistant seal.