Often used on conveyor systems and bin filling operations, these switches have the rapid-closing action of a snap-acting switch but have a large actuator for sensing larger objects.

These switches actuate with the slightest push for a high degree of accuracy. They're rated IP67 for protection from wet locations and temporary submersion.

Secure these switches into panels using mounting nuts.

Sealed actuators prevent these switches from jamming, even when exposed to sand, mud, or dirt. They're rated IP67 for protection from temporary submersion.

Prevent equipment from automatically restarting—these switches must be manually reset each time they're actuated.

Use these switches where ignitable gas and dust may be present. They meet NEC Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups E, F, and G for hazardous locations.

Actuate these switches with half the force of other subminiature switches for increased accuracy.

Smaller than standard size snap-acting switches, these fit in tight spaces.

Keep out dirt and moisture—the sealed housing on these switches is watertight and meets MIL-PRF-8805.

Rated NEMA 4 , these enclosed switches have a sealed actuator for protection from washdowns.

These switches actuate when a magnet comes within sensing distance, and reset when the magnet moves away.

Often used as position indicators, pump level controls, and machine limit switches, these switches actuate when tilted to a certain angle.