A built-in faucet allows easy dispensing.

316 stainless steel is more corrosion resistant than 304 stainless steel.

Batch cans with drain have a drain centered on the bottom of the can.

All drums are UN-compliant for shipping.

The inside of these drums is epoxy coated to resist rust. Drums are UN-compliant for shipping.

These drums are corrosion resistant and are UN-compliant for shipping.

In addition to being corrosion resistant, these drums have smooth, welded seams to prevent food and chemicals from collecting in crevices.

For technical drawings and 3-D models, click on a part number.

Store food, beverage, and pharmaceutical products in these drums, which have a sanitary design. Smooth, welded seams and a polished, seamless interior prevent product build-up and bacteria growth. Their silicone seal is FDA compliant for direct contact with food. To help you clean around and underneath these drums, they have a raised bottom. They’re also stackable to save space in your facility.

304 stainless steel drums have very good corrosion resistance.

316 stainless steel drums are more corrosion resistant than 304 stainless steel drums.

Store dry materials in these lightweight drums.

Use these drums for secondary containment or for temporarily storing and transporting leaking containers. All drums are UN-compliant for shipping.

Store large quantities of liquid in these flat-bottomed tanks. They have vented fill caps so air can flow in and out.

For technical drawings and 3-D models, click on a part number.

No need for separate spill-control pallets or trays—comply with EPA regulations for storing hazardous liquids with just one tank. These tanks have two walls, so if the primary compartment ruptures, the secondary one will contain the leak. It can hold 110% of the primary tank's volume and will also protect it from damage in case of impact.

Made of polyethylene, these tanks can store a broader range of chemicals than steel double-wall tanks. The plastic contains UV inhibitors so they can be used outside.

These tanks have a flat space on top where you can mount a metering pump. Because these tanks meet NSF/ANSI 61 for drinking water, you can meter chemicals stored in them into your drinking water system.

For technical drawings and 3-D models, click on a part number.

These containers have two molded-in side handles and a durable bottom that stands up to dragging across the floor. They meet NSF/ANSI standards for food equipment.

These containers have two molded-in side handles and a durable bottom that stands up to dragging across the floor.

Store fluids for a hydraulic power unit or circulating-oil system. Choose a tank capacity about three times greater than your requirement to allow for heat dissipation. Tanks with only a drain connection require you to drill your own inlet/outlet connection and add pipe suction flanges (sold separately). Flanges seal pipes that pass through the top plate of your tank.

Dual chamber tanks have a divider that allows particles to settle on one side before fluid is returned to your line.

Breather vents prevent excess pressure in tanks and allow a free flow of air. To install the breather vent to Style C tanks, drill a hole in the tank.

For technical drawings and 3-D models, click on a part number.

These tanks have drain ports on the bottom to remove condensation. All other ports can be used as inlets or outlets in any configuration.

Tanks with mounting plate have a platform where you can secure motors, pumps, and other components.

Steel tanks are primed or powder coated for corrosion resistance. Epoxy-lined steel tanks also resist interior corrosion that can result from moisture in your compressed air.

Safety regulations restrict sales to the listed jurisdictions/areas.

For technical drawings and 3-D models, click on a part number.