Designed for use with misting systems, these coolants have excellent cooling properties for intermittent machine cycles when milling and turning.

Use these lubricants with magnetic-base drill presses to cool machining cycles, improving workpiece surface finishes and extending tool life.

An alternative to nearly dry machining, apply these coolants to tools before milling and machining to reduce heat with minimal cleanup. They’re often used for shallow drilling, reaming, and tapping, as well as on saw blades.

These coolants won’t react with or stain soft metal, such as aluminum or copper. They remove heat, prevent workpiece corrosion and distortion, and improve accuracy while cutting.

Increase the time between coolant changes—wear-resistant properties allow these coolants to perform longer than standard grinding coolants. They prevent material from building up to ensure a high-quality finish and preserve tool life.

Weld longer without damaging your torch—replace the water in your welding cooler with these coolants to prevent mineral deposits and frozen lines. Coolants also tolerate colder temperatures than water. For use with MIG, TIG, spot, and stud welders. They are nonconductive.

Use these coolants in drawing, stamping, and forming applications with all metal. They protect both dies and cutting edges as well as finished workpieces.

Also known as plumber's lard oil, these light-colored lubricants are chlorine and sulfur free, so they won't stain soft metal, such as aluminum or copper. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier.

For use in food-processing and preparation areas, these lubricants are NSF registered H1 for incidental food contact. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

Use these lubricants for easier and faster tapping, cutting, and threading of hard and thick material. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life.

These easy-to-apply stick lubricants won't drip or run for a cleaner workspace. Use them for tapping many types of metal, as well as plastic and rubber. Apply to taps to make cutting faster and easier, improve surface finishes, and extend tool life.

These electrical discharge machining (EDM) lubricants resist oxidation, so they last longer and extend the life of your electrode. They're clear for workpiece visibility.

Spray these lubricants on saw blades and drill bits to make cutting easier and extend the life of your tool. They protect tools from sap, reducing cleaning time. Made without silicone or petroleum, they won’t stain wood or interfere with glue or finishes.

Apply these lubricants to abrasive belts and wheels to extend their life and improve ground glass surface finishes. They lubricate the abrasive surface for faster and easier cutting cycles. They won’t stain metal, so they can be used as general purpose grinding fluids.

Remove oily residue, soap deposits, and heavy soils from your machine-tool reservoir without harming paints, coatings, seals, and hoses.

Chemically neutralize and eliminate harmful acidic or alkaline gases, such as hydrogen sulfide and ammonia. These deodorizers are often used in machine coolant, cutting fluids, wastewater, and trash collection areas.